Man, Very Good!!! Another one of your great videos!

@AliMECH

3 жыл бұрын

Thanks man, appreciated 🙏🏻

@roolrool3238

3 жыл бұрын

@@AliMECH i am a philippines national watching from Saudi Arabia, your the best technician I have ever seen.

@AliMECH

3 жыл бұрын

Thanks Rool, appreciate that 🙏🏻🙏🏻

@roolrool3238

3 жыл бұрын

@@AliMECH Mr. Ali Mech can you make also tutorial for a diesel engine cleaning injectors system. Thanks in advance rool...

@AliMECH

3 жыл бұрын

Thanks, I will 🤜🤛

For folks who have never done this before: he’s removing air filter box etc just to access where the fuel line connects to fuel rail. If in your engine layout you can access that point without air filter box in the way, you can leave the air box alone. 😅 Great video!

Thank you! You just save me A LOT of time and money to complete a simple process.

@AliMECH

3 жыл бұрын

I'm glad that my video was helpful ✌🙏🏻

Great video! Thank you for the detailed explanation on fuses. Can’t wait until I perform this on my car.

@AliMECH

3 жыл бұрын

Thanks, good luck 🙏🏻✌

To avoid the starting lag when you reconnect the fuel lines on the fuel pump is to turn on the car but do not start do this like 4 or 5 times then the fuel pump will sent pressure to the engine so it can start without hesitation on the first try. Also removing the battery terminals can be helpful to avoid fuel leakage when taking out the fuel lines from fuel pump. Anytime you remove an electrical connectors it's always good to disconnect both positive and negative terminals of battery, so that way you won't blow any fuses. Just to be on the safe side.

@jacobbillups4715

Жыл бұрын

This is a good point. For a side note you and others might appreciate, I used that feature (ignition on pumping small amount of fuel through the line) to empty old gas out of my gas tank. Car had anti siphon system, fuel filter integrated into pump, and I didn’t have the patience nor equipment to drop the tank. So I took the pump relay out, and put a paper clip in its place to bridge it open. That way as soon as the battery is reconnected that relay is forced on/open non stop. So long story short I disconnect the fuel line at same spot as the vid with a hose running to a container and I let the car drain itself in one fell swoop

@motaseamtariq8737

10 ай бұрын

Thanks for the advice 🙏

Works perfectly. Genius!

@AliMECH

2 жыл бұрын

thanks for watching

It was very helpfull and i am so happy that we have a high level car repairing videos as yours Good luck

@AliMECH

3 жыл бұрын

Thanks bro, that means alot 🙏🏻🙏🏻

Very helpful and great video. Thanks Ali!

@AliMECH

3 жыл бұрын

Thanks Firat

Well done. DiY part of a work might be tricky and quite difficult.

bro another mission impossible one, respect

@AliMECH

3 жыл бұрын

Thanks bro 🙏🏻

I believe you because I followed exactly your instructions, the engine is much quieter after cleaning the injectors

@AliMECH

3 жыл бұрын

That's awesome, thanks for your feedback

@IamRemoWilliams

3 жыл бұрын

@@AliMECH what took auto mfg sk long for a access door to fuel pump.Old days had to drop tank.but id use a grinder and cut my own access door and patch with metal and rivet.

Thanks Ali for sharing this infomative car tips.

@AliMECH

2 жыл бұрын

My pleasure, thanks for watching

One of the best videos I ever seen .your good. All the from Jamaica. Blessed love bro

@AliMECH

2 жыл бұрын

I appreciate that

It does work! I just did it with my 2006 nissan frontier 4.0 was shaking when coming to a red light or full stop. Now my problem is gone.

@AliMECH

3 жыл бұрын

Thats Awesome, great job

Verry helpfull Thank's freind 👍👏👏👏

@AliMECH

3 жыл бұрын

Thanks for watching

انشاالله YOU get over 2 millions 👍👏🙌🙏👌🙌

@AliMECH

Жыл бұрын

Thanksss

Very good idea

her bazhi dast xosh.I love it.

Great video!

@AliMECH

3 жыл бұрын

Thanks

Great video brother!! God bless you!!

@AliMECH

7 ай бұрын

Thanks! You too!

*Like !!!* saludos desde Sonora México

@AliMECH

3 жыл бұрын

gracias por mirar 🙏🏻🙏🏻

excellent. thank you

@AliMECH

3 жыл бұрын

You welcome 🙏🏻

Muito bom

Great work with smart way... I like it... I will try it on my Suzuki-kei car.

@AliMECH

3 жыл бұрын

Awesome, thanks

@MoonzSocio

3 жыл бұрын

@@AliMECH do you have WhatsApp no, so i can send you images of pipes for confirmation

@AliMECH

3 жыл бұрын

No, I dont use it

Well done, as a professional automotive technician I really believe that all of this is gonna work, especially for Iraqis fuel which is extremely bad fuel

@AliMECH

2 жыл бұрын

Yea man, thats the easiest way

@keithmcneil1180

2 жыл бұрын

Should block the return line so you don't just blow cleaner into the tank

@AliMECH

2 жыл бұрын

It wont get back to fuel tank, bc carb cleaner can wont be able to provide that much pressure to pass return line valve

i love the video..i know it works..i already tried your method..looking forward for videos mate..

@AliMECH

3 жыл бұрын

Thanks man, more coming

@baronde7063

3 жыл бұрын

Hallo Ali l have a jaguar x-type 2005 diesel can l fo it same like you .(dikarim wek te çèbikim.)gelek Spaß

@AliMECH

3 жыл бұрын

@@baronde7063 No, this method not for diesel engines, i recommend removing them and clean them out of the engine, i have videos about that, i will do some tests in the future videos to find a way for diesel engines as well

Aliment, how do I pop the air cleaner box from that clip on the right hand side , any suggestions would be appreciated, my technical process in fixing cars is very limited. Thanks for your KZread channel. Larry

Pretty good video, but just so it never gets to where u have to do this, I would just suggest getting high quality fuel in the car with injector cleaners added after every oil change.

Great video and expanation!

@AliMECH

Жыл бұрын

Glad you liked it!

Great video, and very clear process! Do you know if I can disconnect only the fuel pump fuse, not the harness, and still do this on a 2006 Lexus IS250?

Thank brother for this video I did everything as you explain but I got engine check light i cleared by OBD but it’s coming again can you please tell me what I can do to delete the light thank you

Hi. Will this method work on a corolla with a port fuel injection system?

Good job man 🌹🌹🌹 Nice I was planning to buy non dismentale fuel injector cleaning device but I find this way much cheaper and easier 👍👍👍🌹🌹🌹

@AliMECH

3 жыл бұрын

You welcome bro, thanks for turning in, yes this is the most effective and cheap way

@Sroor2023

3 жыл бұрын

@@AliMECH 👍👍👍

@ahmedmohd1512

2 жыл бұрын

tried it?

Wow..cool and smart I watch some of your Toyota videos and I drive a Honda Accord v6 2016?

@AliMECH

3 жыл бұрын

Glad you like them!

Hi. Can I do this on my ecotec V6 holden Commodore 2002 model? And do I pull fuel injection fuses and relay?

Thank you so much for the great video. I made the mistake of dumping fuel injector cleaner in the fuel tank which clogged one of the injectors..now I am getting CEL saying cylinder 3 is misfiring. Car stuttering at idle and happens only after engine warms up. All points to fuel injector. Used your method and emptied full can (about 350ml). It reduced the stuttering. Will there be any issue if i do it one or more cans? Appreciate any help.

Great

Exellent!

@AliMECH

3 жыл бұрын

Thanks

Very nice video 👌

@AliMECH

Жыл бұрын

Thanks for watching

Do you have any videos on sorting out a blow by on a diesel SUV

can you do this type of service in 2018 Toy Camry SE?

Do you think that some cars might run by removing the fuel pump fuse or do they all shut off the injectors? Thank you

Great video

@AliMECH

3 жыл бұрын

Thanks for the visit

@AliMECH

3 жыл бұрын

Look like you didn't watch the whole video, I took it out and the car wont start, fuel pump fuse in Camry not only responsible for the fuel pump but also powering up the injectors, watch the whole video

@AliMECH

3 жыл бұрын

This is more effective and fast that driving 10k poor ideling car just for cleaning injectors

Does this same process work for TBI injection

good video

@AliMECH

3 жыл бұрын

Thanks for watching

Please, do this same video for Toyota Corolla 2013. Thanks

Hi thanks for sharing this will thos work on a toyota prius 2007 it has a pcv how do I do it for that car?

Probably removing the fuel pump fuse is much easier

@cpd969

Жыл бұрын

Here is what he said 7:00

@dragan3290

Жыл бұрын

Not on Toyota engines

@user-ki2dt1fw9f

Жыл бұрын

​@@dragan3290 what does it mean??

@austintalley4070

Жыл бұрын

The fuse for fuel pump protects the entire efi circuit. Removing it would disable the injectors.

@curtiswhite7720

8 ай бұрын

I agree and understand on the fuse. But maybe try doing the fuel pump relay instead. I did it with no problems on my Jeep, but each car is different.

this is one of the best video .ever see on utube👍👍👍👍

@AliMECH

3 жыл бұрын

Appreciate that

Hi AliMMECH I woul like to do this procedure on my Yaris 1.0 gasoline of 2005. Can any of the chemical products inside the carbon cleaner can create a problem to my engine in the future? Thanks for your time!

Great video! What size black hose did you use? I'm doing this on a 1997 Toyota Camry.

@AliMECH

3 жыл бұрын

Thanks, I used 8mm hose

I want to do it this but I know carb cleaner to be very aggressive. will it not eat away at the glue as I feed it into my engine?

Does it clean the o2 sensors? Is their any concern that it could damage anything? Otherwise this is amazing

Good one

@AliMECH

Жыл бұрын

Thanks for watching

Does it also clean o2 sensors?

what brand is your blue tool set??

Can this work on a Kia Forte 2017 model??? Help me.

Awesome!! How would yo do it on a GDI engine (2014 elantra gt in my case)?

@AliMECH

2 жыл бұрын

Just remove fuel pump fuse and connect the carb cleaner to the fuel line if you don't need to remove the injectors

Hello..Anthony Martin Emergency Mobile Mechanic...Great tip...Buy Refirbished set fuel injectors..Mileage on fuel injectors plus ethanol percentages with fuel always factor....Star Tron Enzyme Fuel Treatment the best.....Take Care...

Hello is this for diesel cars or only petrol.if is for diesel what is the best thing to purit in the injector

nice

@AliMECH

2 жыл бұрын

Thanks ✌

Awesome!! will this method work on my 1985 Toyota 4runner with the 22re engine?

@AliMECH

Жыл бұрын

Thanks, yes sure if it's gasoline

2:35, yeah, I didn't like taking the gasket of the fuel tank off. What if you run a pipe from the engine fuel line and direct it to a bucket, so granted you will waste some fuel but it is way better than taking the gasket out of the fuel tank. Then you can continue the other process as normal, maybe because the engine cannot maintain pressure, it may not allow you to do so? Is there any other way? Tapping into the harness somewhere else? Disabling a relay while keeping the fuse in?

I have a Rav4 with the same 2ar-fe engine but it doesn’t have easy access to the fuel pump like your Camry. Do you think I could follow this same procedure but route the fuel line to an empty jerry can so the fuel injectors run just on the cleaner? Or do you think that would cause problems and the fuel pump has to be disconnected?

@eljaibas16

Ай бұрын

Hi, I have the same RAV4, how did you do it? I'm planning on doing this, maybe just removing the fuel pump fuse?

Hi, you are really ingenious congratulations. Question: can this system to clean the injectors without disassembling them be used for a diesel? If you made a video for this system, can you give me the Link. Excuse my English but it is translated by Google, also because I follow you from Italy. Thanks and congratulations again.

@AliMECH

2 жыл бұрын

No problem I understand you well, no, this method only for gasoline engines

That method will work for diesel engine?

Can I perform this fuel injectors cleaning a second time if the first time didn’t fix the misfire p0302? I already replaced the spark plugs and coils and the engine code is still there…

@AliMECH

2 жыл бұрын

Or you can take it out and clean them out of the engine, like I did here kzread.info/dash/bejne/k3iq1tygXbfOitY.html

Veslee's carb cleaner has instructions for fuel-injection systems where you can spray half the can into half a fuel tank. No idea how effective it'll be but hopefully it helps with pistons too

@vsvnrg3263

Жыл бұрын

i can tell you that the cleaner through the fuel tank may not work. in my case it didnt work. i have put 3 different sets of injectors on an old 1986 skyline and all jammed up doing it that way. i just found this man's videos. this is how i'll be fixing my problems without a doubt.

@sylfraeaveniore2684

Жыл бұрын

@@vsvnrg3263 One can always disassemble them and use the carb cleaner directly into the injector. Or, from months of extensive video consumption, just use premium diesel/gasoline from reputable companies once in a while. Cuz those things works wonders for the fueling-injection system. I've stopped using regular diesel and went with V-Power only. That's for sure. Or you can go with halfsies (1/2 Premium; 1/2 Regular), for a more economic approach. Just don't mix them from different brands.

@spsenator

Жыл бұрын

@@vsvnrg3263 so sure that this will fix your problem before you even try it..SMH

Can you clean knock sensor without removing them in a 2000 Lexus es300

@imzjustplayin

2 жыл бұрын

knock sensors don't need to be cleaned, they're basically a very tuned microphone. When they fail, you have to replace them.

good

@AliMECH

2 жыл бұрын

🙏🏻

How can we securely disconnect the fuel line and reconnect this is a pressurized system so pls HELP

Hello Mr Ali Can you please help me for the problem i have confronted with . This is the story as below . I have 2006 scion , the car had a little hesitation, i clean throttle body by removing it replace the the screen seal , replace plugs , replace vavle cover gasket it was leaking oil around the plugs , then started fine , after i saw your video i did what ever you show how to clean the injector , but nothing was coming out ,i bought the pulse maker + cleaner , nothing was coming out , with no filter in the injector , i order filter , when i put all the injector on , car runs 1 minute , cuts off , engine light comes on , i check the cods , keep saying hesitation cyl# 4 , i install new Denso original ( 240 $ ) nothing changed .I love my little car it was working good , now i have order 4 igni coil , anyhow what you think it might went wrong . the battery was disconnected when i replace the injectors . i am going crazy . i will get the coils by friday jully 29 .today is jully 26

Awesome, the earliest way to clean the injector.that I was looking for. However, can we do your way of cleaning it for a Chevy avalanche z71 2001 pick up truck? Thanks in advance for your response.

@AliMECH

3 жыл бұрын

Yea, I guess you can, if one can didn't create enough pressure, you need two cans, make a diy Y connector to connect 2 cans to the fuel rail, if one can didn't start the car

@singseno2942

3 жыл бұрын

@@AliMECH Thank you so much for a prompt reply and advice. I am not a mechanic and no experience at all but love to watch your video which is simple and details make me easy to understand. Thank you again.

@AliMECH

3 жыл бұрын

Thanks for watching 🙏🏻 glad I can help

@alimech hey bro do you have any video doing the same fuel injector cleaning process but in a Acura MDX or any Honda engine

@AliMECH

2 жыл бұрын

No i dont have, but the prosses will be the same, but i will do that if i find one

@hanselldisla4643

2 жыл бұрын

@alimech thanks bro for the response. Another question what’s the brand of carb cleaner you used in the video ?

@AliMECH

2 жыл бұрын

@@hanselldisla4643 Most of times i use ABRO, but all work the same

Does the carb cleaner not affect the cylinder walls by removing the oil and possibly messing something up with the pistons cleaning the injectors this way ?

@luanvu105

3 ай бұрын

I mean would gas does the same?

where in the world you got that long straw for spray can?

@AliMECH

Жыл бұрын

It came with seafoam can

Man that’s awesome. ! Will it work on the 2014 Toyota Camry? And carb cleaner who would of known . Any type of carb cleaner? Thanks man

@AliMECH

3 жыл бұрын

Yea man, it will work on 2014 too, yes any carb cleaner

great and smart

@AliMECH

3 жыл бұрын

Thanks 🙏🏻

@princealabdali

3 жыл бұрын

@@AliMECH I am going to do it and see the coming results, Thanks

@AliMECH

3 жыл бұрын

You welcome

@princealabdali

3 жыл бұрын

@@AliMECH Could you please tell me the size of the fuel hose, is it 3/8" or 5/16" or other than that??

@AliMECH

3 жыл бұрын

Yes 5/16

Starter for camry was changed and worked for 2 day. The third the car started and the rpm moved erratically and the car cut off and would not restart. What should i do? Thx

How to locate fuel pump relay on 2013 Corolla? The cover diagram is not clear.

@AliMECH

2 жыл бұрын

Look at your cars manual book, fuse page section

Hi Ali will this carb cleanerclear debris from the injector filters

@AliMECH

2 жыл бұрын

No, I used to clean the filters when I didn't replace them

Hello , nice video! Does this work with diesel cars?

@AliMECH

2 жыл бұрын

Thanks, No

Wouldn’t BG44k be a lot easier to do? Good job 👏 though!

Hi guy could u show video how to clean today turbo charger fuel injector car ? More people would await to see.

I want to clean my toyota tazz fuel injectors

This video is great , but wt if car ckeaner added direct inside the fuel tank ???

@AliMECH

2 жыл бұрын

Thanks, Not a good idea, sometimes it will stops fuel pump

@ahmedazazy763

2 жыл бұрын

Thanks ...

Where did get the diy host and what size?

@AliMECH

2 жыл бұрын

I made it, its 8mm inner diameters

Ali can you help. I have R20A Honda engine. Fuel line is easy to access. Connected carb cleaner and rubber vacuum hose with jubilee clips on. Disconnected fuel pump fuse 9 and turned engine. After several attempts engine would not fire whilst spraying carb cleaner can. . Does fuse removal disconnect injector operation also? Any reasons why it won't start? With Fuse back in and fuel line reconnected and it starts first time. 🤷‍♂️

@AliMECH

2 жыл бұрын

its ok, the can pressure didnt provide enough pressure to run the engine, even if it didn't run, carb cleaner still will get in the injectors and clean them, try with different can

@bronniesboy

2 жыл бұрын

@@AliMECH I am going to check my coils next to identity slight misfire at low speed. So far I have tried your valve cleaning, MAF and PCV valve cleaning. I may try heat shrink over the coils as they are now 97000 miles

Can this be done on Mercedes-Benz W203 2004 c240?

@AliMECH

2 жыл бұрын

Yes you can

How many miles interval should you clean the injectors. 30k, 60k?

@AliMECH

2 жыл бұрын

I would say 30k

Where can I get that long red straw... ?

@AliMECH

3 жыл бұрын

I bought seafoam and it came with it

How the engine running??? as u switched off the fuel pump is carb cleaner is flammable like fuel??

@AliMECH

3 жыл бұрын

It burns just like fuel

@ahmedazazy763

3 жыл бұрын

Thanks bro..

do you need to chNge the oil after this?

@AliMECH

3 жыл бұрын

No

Do your car have return flue line? I have on my mk4 vw, on fuel rail i get feed fuel line and also return flue line. Iam concern about that?!

@AliMECH

3 жыл бұрын

Mine doesn't have return line, even if you have return line, carb cleaner can wont be able to open it and get back to fuel tank

@predragsmiljkovic4418

3 жыл бұрын

@@AliMECH Bro i did it :). My car was running about 20 sec on car cleaner can. The can wasnt full. After that i was drive my car 5 miles . I feel my car running better. Thanks bro

@AliMECH

3 жыл бұрын

That's awesome , thanks for your feedback

Just curious, how much of a can did you use and is there any risk of it wearing down seals/rings by thinning out the oil that is lubricating everything? I did this and it does work....I used 3/4 of a large can....wondering if thats possibly too much though.

@AliMECH

3 жыл бұрын

I use half can, and no it wont damage anything, it will burn better than fuel, I been doing that long time ago, and never had any problems

@captieye

3 жыл бұрын

@@AliMECH ok good to know.... you are literally the only person doing this I could find and yes it does work!, but I'm a bit von the fence if it's actually doing a good cleaning or if it's causing any potential long term issues. Either way though, thank you for posting these videos and I did it myself and have noticed I have better acceleration and slightly smoother idle. Real test for me is MPG because that's my main issue...I used to get 17 on my xterra, but last 4 tanks 10mpg. Something isn't right, but no other issues except for leaking transfer case. Cleaned the MAF, checked brake drag etc.... nothing else an issue so far.

@AliMECH

3 жыл бұрын

@@captieye Awesome, thanks for your feedback

@captieye

3 жыл бұрын

@@AliMECH ok, mpg is nearly normal again ...for what I'm used to. I think this actually worked!

@captieye

3 жыл бұрын

@@AliMECH thanks for doing this btw,....you are the only person on KZread who's done this.

Great video once again 👍 any plans on changing the transmission fluid on the Camry? Maybe just a drain and fill?

@AliMECH

3 жыл бұрын

Thanks, Yea I will, but not that soon, my car has 25k on it so far

@xNAVAx562

3 жыл бұрын

@@AliMECH Nice, when do you recommend changing it? My 2015 Camry has 50k miles.

@AliMECH

3 жыл бұрын

50k or 2 years

@technocody9296

2 жыл бұрын

Better at 30k miles or 5 years. Many people on Reddit and forum says it showed brown between black. Mine nearly black because I drive over mountain many times and winter time.

I dont understand where you connect this spray. directly to the injection line - comonrail, or before the fuel pump

3 жыл бұрын

Look 👀 again

The dirtier where is gone to the piston then?

I tried it as you shown, but failed. My car didnt start with spray. Why?

Тема Normal но если запускать двигатель V6 на холодную одного балона очистителя не хватит если на прогретом двигателе предположительно тоже но это не факт думаю что лучше иметь два балона . И масло в двигателе после этой очистки лучше поменять.