Wish I could sit around a campfire with these guys and learn from them

@BeckumOutdoors

2 жыл бұрын

Thank you.

@Rob_Tradbowhunter

2 жыл бұрын

Same here man. The knowledge between these two guys is amazing.

@tonymaurice4157

Жыл бұрын

@@BeckumOutdoors will Ash make a 100lb bow? Flatbow

@ThomasWilts98

Жыл бұрын

@@tonymaurice4157 make the limbs 3” at tha fades and taper it gradually to the string knocks

I’ve seen a few bow making videos, and always believed it doesn’t take weeks, months, years to make a single bow. Seemed to me natives didn’t wait that long, considering some nomadic tribes having to carry wood just to cure it. Thx guys

Thank you for this demonstration, guys! I tried fire hardening a freshly-cut green beech bow and it worked!

Great video! I used a fire hardened hickory bow following this method and took a nice doe with stone points and all this past season, keep up the good work guys!

@BeckumOutdoors

3 жыл бұрын

Good deal. Great accomplishment.

@noahsmith8988

4 ай бұрын

Make a Creek Indian bow in my reading and artifact finding they used a bow about 5 foot long or shorter flat back and rounded belly D shape when strung up

There’s ALOT of knowledge y’all have! I’ve been working with fire hardened bows, and y’all helped me out a lot.

Lost knowledge is being regained. Thank you.

@BeckumOutdoors

3 жыл бұрын

Thanks glad you watch our information.

Pretty astonishing feat! Thanks to your research this will become commonplace.

@BeckumOutdoors

3 жыл бұрын

Thank you very much.

@BeckumOutdoors

3 жыл бұрын

I give the credit to Keith Shannon. He was the man that took the time to experiment with white woodS and fire. He asked me to come on the ride and I am glad he did.

I really like the small pencil block used during tillering for the short-length curvature guide. I like that there is something physical, a reference material (flat block) to exemplify the changes in curvature - and that it doubles as a marking tool to identify flat/curved/shallow spots with the pencil.

@BeckumOutdoors

2 жыл бұрын

Yes I agree. It helps to really fine tune your tiller. Thanks for watching

@tomg3165

2 жыл бұрын

It is called a tillering gizmo if you want to make one. The plans are online. Simple little tool. Works best on straight staves or boards.

Loving the further research and experimentation yall are doing

@BeckumOutdoors

3 жыл бұрын

Thank you.

Outstanding! This has made me love bowmaking even more. I am trying your technique on an elm bow and wow, no checks! Wont be 12 hours but more like a week. Thanks for the great videos!

@BeckumOutdoors

3 жыл бұрын

Thank you

@BeckumOutdoors

3 жыл бұрын

Keep experimenting.

Game changer. Thanks for your hard work. I keep thinking about a native American working the bow limbs over a fire and fine tuning their bow.

Awesome work. Thanks for sharing!

Thad you never cease to amaze me. What you both have discovered or rediscovered,not only helps us understand more about what the natives probably did,but your contribution to the bow world is outstanding. I live in Wales in the U.K. so woods here are different, but I do believe this can be applied to many woods here. Thankyou gentleman. You have most certainly sold me your DVD. Kind regards, Antonio

@BeckumOutdoors

3 жыл бұрын

Thanks brother.

Unbelievable!! Thank you for the amazing content. Been wanting to get into bow building for years. Thanks again.

@BeckumOutdoors

2 жыл бұрын

Go ahead and take the leap into bow making , it gives great satifaction.

Gentlemen. What a pleasure to see your excitement with this issue. Congratulations and a big thank you for sharing this. I love the reflex on your bow.

@BeckumOutdoors

2 жыл бұрын

Thanks Victor.

So glad to see more content from you great stuff

@BeckumOutdoors

3 жыл бұрын

Thank you.

I bought your dvd and thank you for sharing the knowledge. I have a hickory stave harvested years ago and two black locust staves. I want to make south eastern style d bows with them. Can’t wait to use the fire technique with them. Also have a bunch of hickory staves i harvested last year in Pennsylvania. Some are so straight. Can’t wait to make and use you techniques

@BeckumOutdoors

3 жыл бұрын

Great, let me know your outcome. Thanks

Thanks brother keep up the great work. Watching your videos made me start building my first bow

@BeckumOutdoors

3 жыл бұрын

Thank you.

Unbelievable the things I’ve been learning from yawls videos I’ve been making hickory bow for years , And going to Fire Harden my first bow in a week or two. Might have to bring a few of my old Hickory bow out of retirement and Fire Harding them also, thank y’all so much and hope y’all keep making videos

@BeckumOutdoors

3 жыл бұрын

Thank you. I have taken old follow the string hickory bows and transformed them into better weapons. Good luck.

This is interesting I saw Clay Hayes make one in less than 24 hour, I think his was made out of Elm. So I think you guys have a winner here. Thanks for sharing what can be done with white wood bows!

@BeckumOutdoors

3 жыл бұрын

Thanks.

@charlesleblanc6638

Жыл бұрын

And without power tools which has to slow you down !

I really enjoyed this tutorial on building a bow from green stave to fire hardened, reflexed shooting hunting bow in less than 12 hrs...Thad, you and Keith are on to something here...I'll have to give it a try...have some hop hornbeam that would benefit from this treatment process....thanks for posting guys!

@BeckumOutdoors

2 жыл бұрын

Thank you.

Amazing. I will try it for sure. Thank you so much.

@BeckumOutdoors

3 жыл бұрын

Thank you also.

Keep it up. Love your videos.

This is a great video. A lot of knowledge to be gained here. Thank you for sharing.

@BeckumOutdoors

3 жыл бұрын

Thanks

Have used and instructed many to use hickory, ash, eastern hop horn bean etc. Hickory and hornbeam(ironwood misnomer) hold moisture more than most woods. I weigh my bow staves and when weight stops dropping it is 10-12 moisture content. When fast drying a bow, moisture meter only shows surface moisture. Hickory and Hophornbean are top grade woods when dried and tiller properly are great. My fastest bow was a hop horn bow made for my hunting buddy .Faster than any of my Osage bows. That’s my two cent Bob Brooks

Thank you so much for this . I am learning from everyone on you tube on how to build my own bows here in Missouri .

@BeckumOutdoors

Жыл бұрын

Thank you

Awesome job- love your dvd I bought one from Billy. My friends and I will be using your technique very soon too build ours....experimenting with many Michigan woods- thanks for sharing.

@BeckumOutdoors

3 жыл бұрын

Good luck making your bows

Just bought the fire hardening DVD can't wait to watch it!

@BeckumOutdoors

3 жыл бұрын

Thanks, I hope you make some great bows.

Also, I enjoyed your fire hardening video. I found the brake test to be very interesting!

@BeckumOutdoors

3 жыл бұрын

Thank you. I thought Keith's break test was genius also.

Thanks Thad and Keith, these bows are amazing and I can see why the Indian Bows were described as the finest in the world. Thank you both for your hard work and discovery.

@BeckumOutdoors

3 жыл бұрын

Yes, thank you.

Wow yall are awesome thats amazing hope i get to see more videos

@BeckumOutdoors

3 жыл бұрын

Thanks Mark. Hope to do more videos.

Great video. I believe it was Marc St. Louis from northern Ontario, Canada that pioneered heat- treating bows.

@BeckumOutdoors

2 жыл бұрын

Heat treating and fire hardened are similar but not the same. Keith's method is a much long and hotter heat penetration. Mark st Louis did outstanding work which is well documented in the bowyers bibles.

@yourvinestowine2781

2 жыл бұрын

@@BeckumOutdoors thanks

Just finished watching your new video Keith You guys are really something Well done I am really motivated now to get on with the staff you sent me Thanks again Herb

@BeckumOutdoors

3 жыл бұрын

Thank you.

@herbertkuttner9228

3 жыл бұрын

Keith Did notice a a small problem when I started to further shape and tiller the fire harden pre shaped staff How hard it had became, my planes and cutting tools was a bit difficult cutting the bow wood So I went to grinding and rasping it to final shape ,that worked much much betterI guess it would be better to pre shape fairly well before hardening then tiller after firing What do you think? Thanks again Herb@@BeckumOutdoors

This is like opening Christmas presents!

Hey Thad, enjoyed watching this process. Keep it up 👍

@BeckumOutdoors

3 жыл бұрын

Thanks

Great knowledge!!! Thank You soooooo much for sharing😍🤩😍🤩😍🤩

@BeckumOutdoors

2 жыл бұрын

Thank you for your interest.

Awesome job guys n a very beautiful bow

@BeckumOutdoors

3 жыл бұрын

Thanks James.

I really enjoyed your Video!

@BeckumOutdoors

3 жыл бұрын

Thank you

Man, this is awesome. Think this would be a fun thing to do with a sapling on the river bank to pass time while watching your fishing poles. Brother y’all are on to something, and proving a lot of theories wrong. Outstanding.

@BeckumOutdoors

3 жыл бұрын

Sounds like fun.

Bought the dvd and am planning on fire hardening my first one tomorrow. Very good job guys.

@iowaselfbow1086

3 жыл бұрын

Would absolutely love to see more videos about this. You guys are on the frontier of bow building for us modern folks that are into this stuff.

@BeckumOutdoors

3 жыл бұрын

Good luck hope you make a great bow

@BeckumOutdoors

3 жыл бұрын

Hope you much success making bows.

I want to thank y’all for sharing this information with us. I made my first white wood bow back in 2003 and have always had issues with string follow. I took one of my older pecan bows and fire hardened it the other day and couldn’t believe how much it increases the weight of bow. Going to sinew back it next week and hopefully put it back in active duty as soon as it’s dry enough to retailer and shoot! Thanks and God bless both of you!

@BeckumOutdoors

9 ай бұрын

You are welcome

Holy sh.t, that is one snappy bow! Incredible that you are able to build a bow like this within a day..!!

@BeckumOutdoors

3 жыл бұрын

Oh yes it is.

Awesome job guys

@BeckumOutdoors

2 жыл бұрын

Thanks

You fellers are changing the world

@BeckumOutdoors

Жыл бұрын

Thanks, one bow at a time.

Keep em coming 👍

@BeckumOutdoors

3 жыл бұрын

We hope to. Thanks

Thanks for the tips

@BeckumOutdoors

Жыл бұрын

Any time

Nice craft ideas 👍

Please make you the eastern woodland powathan bow!❤

@BeckumOutdoors

4 ай бұрын

I made a Powhatan bow several years ago. The bow I copied is in the Ashmolean Museum in England. Several Powhatan Algonquian bows were taken from American to England back when the Powhatan was still a powerful empire. They are still there.

Thanks for another great video guys. Invaluable information that you are rediscovering and passing on. Since i bought your video I've made several successful fire hardened hickory bows. I always have 3 or 4 "in progress". I just finished a 42" 45# @ 21" gull wing black locust fire hardened plains style bow. It is backed in sinew as well. I realize that BL is generally weak in compression and strong in tension, so adding sinew would typically make more compression problems. I was banking on the fire hardening to strengthen the belly so much that it would handle the added tension and really increase the performance of the bow. Long story short, it worked. The little bow is super fast and accurate. So far no belly problems... Thank you!

@kytziaf

3 жыл бұрын

Glad to know, i have some black locust staves i want to make 5ft 2in bows in the south eastern style. I wanted to heat treat them.

@stevemiller6044

3 жыл бұрын

I have two staves of seasoned BL. Could you elaborate and update please.

@paulfetter7890

3 жыл бұрын

What exactly are you wanting to make? If you haven't bought the video on fire hardening id suggest getting that first. That way you can learn how to properly fire harden the staves.

@c.rucireta4755

2 жыл бұрын

Great information, I was thinking about it too! I'll give a try

Thank you so much!

@BeckumOutdoors

2 жыл бұрын

Thanks

That is absolutely awesome

@BeckumOutdoors

3 жыл бұрын

Thanks

@joshuahindle1392

3 жыл бұрын

I'm gonna do all my bows like that thank you so much

@joshuahindle1392

3 жыл бұрын

Yep I dug a trench in my yard and tried it

Love it guys👍

@BeckumOutdoors

Жыл бұрын

Thanks Uncle

I just tried fire hardening a white wood bow after buying your video I am at a loss for words. I thought nothing could beat Osage but I live in Georgia and hickory is very easy to find thank you and keep going.

@BeckumOutdoors

2 жыл бұрын

Thanks keep making great white wood bows . Let me know about your results.

@severinevans346

2 жыл бұрын

@@BeckumOutdoors ok results were better than expected it was a little over 45 pounds maybe before the fire hardening process. After it was a little over 50 and the dark amber golden honey color is nice when you hit it with tru oil.

Amei seus vídeos faz lembrar da minha juventude

@BeckumOutdoors

2 жыл бұрын

Thank you.

You know that our ancestors did it the easiest way that they could. They didn't have time to waste needlessly. I believe that they had a very good understanding of what they could do with each kind of wood that was available to them. So much info has been lost and is being lost. To me it just stands to reason that they would have made the best use out of fire in so many things and ways. They were very efficient with their resources and wasted very little in order to not just survive but to thrive as they did.

@BeckumOutdoors

3 жыл бұрын

Yes, I agree 100 percent.

Love it!

@BeckumOutdoors

3 жыл бұрын

Thanks

GREETINGS GENTLEMAN.IM LATE WITH A COMMENT.WONDERFULL EXPERIMENT.I HAVE ALWAYS LOVED HICKORY.STRONG, FLEXIBLE AND EASY TO WORK WITH.FROM MR.TOUFIE SOUTH AFRICA CAPE TOWN.THANK YOU GENTLEMAN

@BeckumOutdoors

2 жыл бұрын

Thank you.

So rad! Doing this with board bows as well, you guys should try a red oak or white oak build!

@BeckumOutdoors

3 жыл бұрын

White oak has been done. Thanks

I made a fire hardened bow and it is awesome

@joshuahindle1392

2 жыл бұрын

Thank you for the information

I just dun a 77 long self bow with this method an ill never do a self bow again without fire hardening the belly I did the back a little to an this one is d shape classic English longbow style not a problem small Crack at the tips but it was 80 overall an I got away with 77 overall blown away guys I figured were it was d shaped it would blowup but in a week I've got a amazing 42lb longbow with no string follow thank you very much guys you really have changed bow building forever

@BeckumOutdoors

2 жыл бұрын

Thank you

Awesome

Out here in Idaho we have Service Berry which I make axe handles with. Also 2 bows, which were aged 1 - 2 yrs. Since it is similar to Hickory I am setting up to fire cure a green stave. Check in later.... Thanks gents for the pioneering work!!

@BeckumOutdoors

Жыл бұрын

Hope you Success with your projects.

I bought the video from your website and absolutely love the hickory bows I have build from it one is 70 lb draw and one is 60 lb awesome bows but I want to see you guys do a video on one out of sweet gum I had 10 trees blow down in a tornado and I cut up 25 staves that have been drying for 8 months.... I built one and it snapped when I was stringing it it was 55lb on the tiller tree I think the problem was the fact that I went straight to tilllering right after hardening instead of letting it take on some moisture first I think that might be a critical step with sweetgum and I have 25 more attempts just gotta find the time to do it

@BeckumOutdoors

3 жыл бұрын

Don't cook sweetgum very hard like hickory and a long bend in the handle design will be the recipe.

@BeckumOutdoors

3 жыл бұрын

Thanks, don't cook sweetgum very hard like hickory. A long bend thru the handle design will be best.

연장이 최고 입니다 추천 합니다

Master of the wilderness

Man ive watched the other video about 100 times and already put blocks in the back yard cant wait to try it my property is covered up in hickory

@BeckumOutdoors

3 жыл бұрын

Sounds like you are set.

I would love to see a video committed to using just sweet gum as your bow wood and possibly pine if this might work just out of curiosity and fun 🤩

awesome

@BeckumOutdoors

2 жыл бұрын

Thanks

Now this makes more sense how the Indians do. I am going to try this. I wish I could learn from them . Hint start classes. Something to share your knowledge. Thanks for sharing . I got the video and its worth getting people.

@BeckumOutdoors

2 жыл бұрын

Thanks Scott

good to see you again Thad. love your videos. i haven't seen Brian in a long time. is he ok?

@BeckumOutdoors

3 жыл бұрын

He is ok. Hope you will hear from him soon. Thanks for asking.

Pois até hoje sou arqueiro Vou confecionar um deste Amei

@BeckumOutdoors

2 жыл бұрын

Thanks

There is a section in the book Survival Skills of Native California by Paul D. Campbell that goes over how a native in Southern California made a bow out of black willow in one day. He did not heat treat the belly but he did heat the tips and bent them inward to deflex the tips, then he strung the bow to hold the bend into position. The bow was then declared ready to shoot and had enough power to kill a rabbit and it could shoot an arrow about 100 yards. This bow was only about 50 inches long for small game, but some natives in Southern California also made bows as tall as the archer or longer in order to be powerful enough to take large game.

@BeckumOutdoors

3 жыл бұрын

Yes that sounds right. The big difference between California and the Southeast is moisture. California is a very dry environment most of the year. Here in the Southeast is very humid and wet. You have to consider the environment. Sinew back bows were never used here because that would be a disaster. Too much humidity and rain. But in California they were used historically. People developed bows and arrows to work in their region and conditions.

I just fire hardened my first hickory bow. it was on the heat for about 1 hour and 15 mins

Nice

@BeckumOutdoors

3 жыл бұрын

Thanks.

Bought the video last year and loved it! Wanted to try different trees and privet bush was one that took really well. I also had a scrap piece of hickory I sinewed 6 months before the video 46" long 1 3/8" wide D bow. Was 60 at 26" then dropped down to 45.. didn't care if it broke or not so fire hardened it for hour & 1/2 just to see if sinew would pull and a 10 lb weight in handle. Turned out 55 then down to 49-50 and got a young doe with it!! That bow had a piece pop out of the back of it before sinewing and just wanted to see if one layer of sinew could save it then saw this video and made it even better!! Hickory can really take a lot of abuse. Thank you Keith and Thad for sharing! I don't have any osage but I do have 40 acres of sweetgum and hickory😁

@BeckumOutdoors

3 жыл бұрын

I was wondering about privet. I enjoyed your story. Thanks

@justinspencer1539

3 жыл бұрын

Learned something the hard way the other day. Had a hickory someone kinda messed up awhile back and tried to save it for them. Limbs were 3/8" thick 1 3/8" wide dude strung it with a hinge so I reflexed it and fired it without form because of huge knot. As it cooked the reflex came out and tried putting weight on handle but no good. Still made a bow but dude had it too thin from start

@BeckumOutdoors

3 жыл бұрын

@@justinspencer1539 At lest you tried.

Looking to make my first real bow up here in Wisconsin. Considering how plentiful hickory can be up here, I think I'll give this method a shot. I was wondering if this would work for Black Walnut? The loggers always leave these around, so I wanted to see if they were decent for making a bow. The wood is gorgeous.

@BeckumOutdoors

11 ай бұрын

Yes it would work with walnut but hard to beat hickory.

@the.reel.mccoy.

10 ай бұрын

Thanks! Just cut a hickory. Going to give it a shot soon. @@BeckumOutdoors

Thad !!! Hows your neck brother ? You look healthy man .... Im lovin this !!!!!!!!

@BeckumOutdoors

3 жыл бұрын

Thanks Jesse, i am moving along just not as fast as I once did.

Yeah it's an amazing technique ! Those guys are awsome. I really wonder if you sinew back those fire hardened bow !!!! what will be the end result

@BeckumOutdoors

3 жыл бұрын

We have sinew backed many fire hardened bows and they are wonderful weapons. Keith has done many sinew backed bows that are fine quality.

I love making self bows and wish I had friends that also were interested in making them together.😢

@BeckumOutdoors

Жыл бұрын

A lot of primitive bow and arrow makers, flint knappers and the like walk their own trail. A trail not to worn out.

Love your DVD, could fire hardening be done to board bows as well?

@BeckumOutdoors

2 жыл бұрын

Yes i have heard some guys are doing that with success.

Very impressive! Always wanted to keep with Osage cause what everyone is told but I have so much hickory to use! Definitely going to try this out. Thanks so much for the content! Would definitely love to see more of what you two can do.

@BeckumOutdoors

3 жыл бұрын

Hope you make some quality bows.

Would it work if you just dug a pit rather than using the bricks, but added tunnels like a dakota fire hole?

@BeckumOutdoors

11 ай бұрын

Yes it will work with a dug pit.

Incredible,thankyou for this knowledge! Can these bow be further enhanced by a sinew backing to allow for a longer draw length with less bow? That would be a another great experiment!

@BeckumOutdoors

3 жыл бұрын

Already done and the answer is yes.

Hi Thad an Keith. This is SO exciting! Been building bows for 3 years now. In South Africa we do not have the same woods available. What I have used before is white Mulberry. It is also a white hardwood. A bit harder than Elm but softer than Hickory. It also develops quite allot of sting follow. Have you tried Mulberry at all? I can get my hand on some honey Locust as well. Have you tried it with this process? Going to test it anyway and let you know.

@BeckumOutdoors

2 жыл бұрын

Yes, i believe it would work. Each wood type may take more or less heat from the fire. Sounds like you have understanding of this concept.

That bow its a work of art!

@BeckumOutdoors

2 жыл бұрын

Thanks

Gotta try this! Got plenty of hickory.

@BeckumOutdoors

2 жыл бұрын

Yes, give it a try

@j.shorter4716

2 жыл бұрын

@@BeckumOutdoors I did! Got it a little too hot. There is a little browning on the back of the bow is that acceptable?

@BeckumOutdoors

2 жыл бұрын

@@j.shorter4716 I have seen browning on the back that was fine, but it depends on how severe.

Hello Keith and Thad, I admire your fire hardening method and your style of bows, very slim yet not too long. If you don't mind me asking, how would you change the layout and process for sugar maple? Can it handle nearly as much as hickory or elm? Thank you.

@BeckumOutdoors

2 жыл бұрын

Hello and thanks for your comments. I have never used sugar maple, it does not grow here. If it is strong in tension I would say yes it will work fine. The design is a matter of preference to the maker and what he is wanting to achieve.

Is this bow 72”? Great build either way.

Ash wood works well also but has a pith in saplings. I have been shooting mine daily for the past 2 months thanks.

@BeckumOutdoors

2 жыл бұрын

Hope you made a great bow from ash.

Can you use white birch?

Boa tarde essa madeira ainda estava verde quando vocês a trabalharam abraço e obrigado

@BeckumOutdoors

Жыл бұрын

Yes, green.

This stuff makes me incredibly excited, going into a craze now with testing various local woods. Could this be why it is often assumed that the natives used really weak bows? That they simply did not understand that they were firehardened? Interestingly an elm bow in Norway (found in a glacier) has been labled too weak for hunting and a possible kids bow. Maybe it was firehardened to raise the poundage?

@BeckumOutdoors

3 жыл бұрын

Please keep me informed about your experiments. Some native bows were low poundage but the bows of the Southeast U.S were very strong. The Spanish who were here recorded that they could not draw the bows of the Florida natives. We are still learning having to look thru the fog of history. Thanks for your comment.

@tomg3165

2 жыл бұрын

I realize this was posted a year ago. But it's love to know what you found from other local woods. If your on any of the bow making FB groups, please consider posting this video and any results you find from trying other woods. Keep learning!👍

@tomg3165

2 жыл бұрын

@@livingprimitively That is interesting results. From your wood in assuming your in the UK, as I am. Thanks for sharing your results. Even more valuable using woods that I have available. Yes, in sure it would warp crazily without a form. Pretty essential for this method on most woods I would suspect. I can't get thin wood to air dry without warping, even in UK humidity. I'm going to build a form and try some elm. Might need to get some new clamps though. I don't suspect my plastic quick clamps will take well to heat treating.

@tomg3165

2 жыл бұрын

@@livingprimitively thank you. I will try the leaves on method next time👍

Have you tried fire hardening osage? I am interested in black locust, have you fire hardened that? I can't wait to try this method. Love the DVD.

@BeckumOutdoors

3 жыл бұрын

Thanks. We have fire hardened, hickory, elm, white oak, flowering dogwood, persimmon, sweetgum. I have heard others fire harden, privet, black locust, promegranite and a couple more. If it is a tough wood with a strong back, it should work. Osage does not need it. Osage has all the good elements anyway. Thanks

The information in this video was invaluable and fantastic.thakyou.the only thing that I can say that is not complimentary is that the gentleman who did the intro could have done it in one fifth the time.he repeated the same info seven or eight times I started counting at 3.thanks again

@BeckumOutdoors

2 жыл бұрын

Thanks, shorter version now alive.

I was wondering if you’d mind explaining how to make a form. Hickory is everywhere where I live. I haven’t made a bow yet I’d like to try something like you did in this video after I make a couple bows and figure things out.

@BeckumOutdoors

2 жыл бұрын

A couple of 2 x 6 treated boards long enough, nail them together. Use a straight edge that bends and lay out your desired setback. Keep nails below your layout line and cut the form outline. A band saw is best or you can use a jigsaw. sand the curve to the line. Smooth things up. No rules here.

@chickennuggetinagutter.7864

2 жыл бұрын

@@BeckumOutdoors thank you sir.

Hi, have just watched this video and your dvd. Have no access to hickory here, so far I have only made board bows.I have roughed out a 54in flatbow from a fairly average piece of maple, I plan to use that to experiment with your firehardening tecnique. I think the wood is pretty dry, maybe around 6 to 7 percent.Should I go ahead and strap it to a form and start the hardening process. I was just wondering about the difference between fire hardening a piece of green wood and an already dry wood..Cheers from Mike in New Zealand..

@BeckumOutdoors

3 жыл бұрын

Do it. No problem.

Great videos!!! I have an elm stave I want to fireharden. Approximately how much charcoal do I need to purchase?

@BeckumOutdoors

2 жыл бұрын

The video explains all you need to understand the process

What brace height do you use on your fire hardened bows?

@BeckumOutdoors

2 жыл бұрын

i use a low brace. Roughly 5 1/2"

Hey man great video! Are you still shooting this bow??

@BeckumOutdoors

2 жыл бұрын

Keith is. It's his bow not mine. Of course he has many bows to choose from when he goes to shoot.

Hi I have an important question arc length usually starts from a few inches to a few inches. Also the diameter of the middle tip and the handle and its width? You can share a drawing or image