Buy it here! www.boyntonproaudio.com/friedman-be-od-deluxe-overdrive-pedal

Good! Finally, someone who messed with the lower gain limits of this pedal and its capacity for dynamics. That's what I needed to hear.

@JuanCanteli

2 жыл бұрын

Hi there, it's Juan from the video. Happy it helped! Don't be shy about reaching out to the Boynton Pro Audio crew if you're in the market for one. :)

@ManfredWaverly

3 ай бұрын

Absolutely!

Now THAT is how you do a pedal demo. Great job! Thank you!

Thanks for a video that ACTUALLY shows everything this pedal can do! Will be purchasing in the near future!

@JuanCanteli

4 жыл бұрын

Alex Dick Awesome! Glad you dig it!

This is Excellent! Great job

Straight to the point! That's how demo should be!

No one would think that the pedal was engaged in the very beginning of the song if you didn't say so! Unbelievable... Thank you...

@BoyntonProAudio

5 жыл бұрын

Taylan Dedeoglu It’s wild. It’s an incredibly dynamic pedal.

Man I am thinking on pulling the trigger on this baby. I also Like the Revv G3.

@BoyntonProAudio

5 жыл бұрын

We have them if you'd like one! www.boyntonproaudio.com/friedman-be-od-deluxe-overdrive-pedal

I don't even think this pedal could sound bad off.

so can i get a real full of clean of one channel and then next channel od sound thats cool

I am after 80's dokken/ratt tone and i've noticed someone used the original version to create almost identical. do you think you might be able to make a tutorial with this pedal? I appreciate your time and effort for the review :)

@BoyntonProAudio

5 жыл бұрын

Hi! That's a very easy thing to achieve, especially with this new Deluxe version. We'd recommend using the lower gain channel with the gain set between 1 and 3 o'clock, the tight control in the down position and a healthy amount of mids. If you're thinking about ordering one, feel free to give us a call at 1-877-SOUND-01 and we'd be happy to chat about your rig and how to use this pedal to get you some killer 80's tones :) www.boyntonproaudio.com/friedman-be-od-deluxe-overdrive-pedal

@freaky425

5 жыл бұрын

@@BoyntonProAudio thank you :)

Could you run this in front of an Eleven Rack with a preset that is clean with some delay? or would it be a mess? I have been using my 11r with a Friedman type preset somebody made available on the 11r site and it is the best one I have found. I guess the guy used an Axe Fx originally to create it. I want a Friedman pedal but thought there could be a use for the 11r to bring delay and reverb/etc I thought about going all out and just buy a Runt 20? Thanks in Advance

@BoyntonProAudio

5 жыл бұрын

JustAnotherPerson OnKZread The BE-OD Deluxe into an 11R would work great. At the same time, there’s nothing quite like the real thing. If you’re interested in either the Runt or the pedal, give us a call at 1-877-SOUND-01, mention this video and we’ll hook you up with a KZread promo price to save you some cash.

This thing sounds crazy good. Do you think it’ll sound good through a blues jr v4?

@JuanCanteli

4 жыл бұрын

Shanto XD Manoukian Hi there. I used a Fender Super-Sonic in this video, so if you liked the way it sounded here, you should be able to dial up some cool tones through the Blues Jr.

Nice demo and playing! Are running the pedal on 18V?

@JuanCanteli

3 жыл бұрын

Thanks! Just running it at 9v.

Do you think this pedal will sound great with a Roland JC-40? (For Metal)

@BoyntonProAudio

5 жыл бұрын

saul velasco We think it would do the trick! Just experiment with the treble and presence controls and we’re sure you’ll find some great tones.

how clean could u make the low gain channel as i want to use it as a preamp after my effects board before going into cabs sims

@JuanCanteli

3 жыл бұрын

It’ll never get Fendery clean, but if you turn the gain all of the way down on the lower gain channel and use your guitar’s volume control you can get fairly clean. You can hear me demonstrate some cleanish tones at the very beginning of the video. Ideally though you’d want to use an actual preamp with a dedicated clean channel if you want a totally clean option.

@djhinormas959

3 жыл бұрын

@@JuanCanteli thanks heaps mate :)

@JuanCanteli

3 жыл бұрын

@@djhinormas959 Happy rocking!

@letsgofuckingcrazy

2 жыл бұрын

@@JuanCanteli on top of that you can reduce the gain with the internal trim pot

What amp was used here and what speakers?

@BoyntonProAudio

5 жыл бұрын

iceman7511 It was a Fender Super-Sonic 60 head into Celestion Greenbacks.

How would this sound in front of a vox ac302c

@BoyntonProAudio

4 жыл бұрын

The great thing about the BE-OD and BE-OD Deluxe is that they have really powerful EQ controls. Adjusting the treble and presence to taste, it can sound great in front of any amp.

the problem not resolved yet by the burger fried chicken man are the fucking trim pots ! why not made them out ?

Damn tasty riffage

Daddy likes to dig

This pedal sounds horrible when connected directly into the input. With none of my amplifiers (Bugera, Egnater, Blackstar, Hughes & Kettner, etc.) I could not produce a good sound. In my opinion, this pedal is much better suited as a preamp looped in the effects loop. Only in this way it sounds really good.

@JuanCanteli

3 жыл бұрын

Hey Andreas! It’s Juan from the video. I haven’t worked for Boynton for a few years now, but was just sending this video to a friend and saw your comment. That’s interesting that you’re not having much luck when plugging straight into the input. Do your amps have a bright cap on the clean channel? If they do, that may be part of what you’re finding unpleasant. I’d try setting the pedal’s treble and presence controls on the low side to compensate. Also, remember that the midrange control on the pedal is boost only, so all of the way down is neutral, and anything above ‘off’ you’re adding midrange. If you have the mids knob set to ‘noon’ you’re flooding the front of the amp with additional mids that can sound honky or weird.

@andreash.2283

3 жыл бұрын

@@JuanCanteli Hi Juan, thank you very much for your reply! It may well be the bright cap of the clean channel. I also know that there are always pedals that do not sound on certain amps. But with the amps I mentioned, almost all my other pedals sound consistently good. It's not like I can have all my amps modified just because of the Friedmann BE-OD. By the way, I bought the Friedman BE-OD from another musician. When I later asked why he had sold the pedal again he told me that he was dissatisfied with the sound and disappointed. He also used it directly through the input of his amplifier. In the effects loop, the Friedman BE-OD Deluxe sounds really good and there I regulate only minimal mids and basses to it and leave the switch of the tight switch all the way down. It just doesn't sound any other way on all my amps. Greetings Andreas

@sanjograi4199

3 жыл бұрын

@@JuanCanteli Thank you! This is useful. I was not aware of the how the MID was setup. I'm not getting enough meat but I am also on a SSS strat. I wonder how a tube streamer or a Tumnus would sound before the BE-OD as my amp doesn't breakup much without diming it.

@JuanCanteli

3 жыл бұрын

@@sanjograi4199 I really like how the Friedman pedals take overdrives. You can actually hear the Dirty Shirley pedal paired with an overdrive in the Quilter InterBlock video on Boynton’s channel, and I have one on my own channel as well. With a SSS combo, try the position where both the bridge and middle are together. You’ll be hum canceling, and that way it won’t be as noisy when you’re stacking an overdrive into the BE. Let me know how it goes!

@sanjograi4199

3 жыл бұрын

@@JuanCanteli You were right, removing the Mid did improve my tone! Also I dialed the trim pots to my liking and man the meat is back :D It'll be a bit before I get another overdrive but the boost from my amp is doing wonders. Thanks so much!