Slowly but surely you guys are giving the fans the 2022 STI Subaru refused to. Thanks, IAG.

@ttis3701

2 жыл бұрын

They should try putting the 2018+ STI Recaros seats in, or at least order the 2022 WRX GT Recaros from Subaru.

@G4LIFE74

2 жыл бұрын

One down ... whole line up of 2022 models next !!!!

@jonw2381

2 жыл бұрын

@@ttis3701 Whoever made the decision of offering the Recaros only in the CVT model should be fired.

@jimmygomez7406

2 жыл бұрын

Aside from the wing that doesn’t fit and bumper it looks great!

@dustincalahaison8976

2 жыл бұрын

Wouldn’t people saved a little more money by just building their own sti?

You guys and Aeroflow Dynamics have the best looking 22 WRX. Really excited to see all the future mods for this.

@bkhavityoway23

Жыл бұрын

Totally agree. Do you know who's personal build this is?

@gwynbleidd7177

Жыл бұрын

@@bkhavityoway23 Unfortunately don't know who's personal build. Might just be IAG's Shop 22 WRX

Current owner of a 20' STi and when the 22' WRX was announced i was hating on it hard... just like everyone else, but seeing all the time and work everyone at IAG has been putting into this WRX. Damn does it look gooood!!

@AngelGuzman-du8hm

Жыл бұрын

Same

Guys ! I installed a set of 2017 STi Brembo on my 2023 VB WRX ! In the back we did exactly the same. However for the fronts, Paragon brakes do sell a 2-piece rotor that is made for VB knuckles and STi 4pots Calipers ! the hat is considerably thinner, getting the desired rotor offset without using spacers ! It is more expensive, but a good quality rotor spacer not being readily available on the market and the mendatory wheel studs replacement made me order the 2-piece rotors for sake of simplicity ! and looks !! keep it up and hopefuly see you at the 2023 wicked big meet !! Look for a Black VB with orange brembos coming from Canada :D haha

I’ve always held the notion that having the fender flares be body color and lowering the car a bit will absolutely fix the aesthetic issues of the new one. I’m glad to see somebody do it and it looks even better than I have imagined.

@theiagchannel

2 жыл бұрын

Thanks!

@MKu64

Жыл бұрын

Since driving it - my issue is that I feel like I was sitting on-top of the car instead of in the car - the seating position was super high up. I drove it back to back with the BRZ and I have to say that although the BRZ has less power and smaller - it was damn fun to drive.

That 2022 WRX is going to be tight when you guys finish...good stuff!!

Ian is the MVP with those wheel spacers on the fly!

Absolutely awesome!!

Making Videos while under a time crunch. Thanks IAG for the content! Have fun at the WBM 2022!

It's was awesome meeting you at wicked big meet 22. Love the car it was awesome. Can't wait too see more update that you do on the 22 wrx.

@theiagchannel

2 жыл бұрын

Thanks for coming

wish you guys would sell a whole kit

You guys are freaking awesome and your right down the street from me in Westminster car is coming together I’m liking this body style more and more as you guys build onto it keep up the great work!!!

@theiagchannel

2 жыл бұрын

Right on! Thanks for the support!

I am excited just had the fenders paint matched and waiting for the STI wing!!!

Man you guys are super talented.

This car is already worth more than 50k$!! What a beauty!

Just bought my wrx gt yesterday. I can’t wait to start working on it.

I'm ready for the AOS kit to come out! I need it

Another little tidbit is that if you get the 15-17 STI rear brake shields it will be a nice OEM setup. No hacking or cutting the bolt right up as if they were OEM

Such a beautiful car.

This is hype. I own a 2023 WRX. The brakes are just fine. 😅

Beautiful Car!!! Wish they would make the STI version like this!!!

I had the IAG street AOS installed in my 2019 STi. Looks great in red.

Very interesting, grimspeed said the STI Brembos didn't match up to the hubs/knuckle so they ended up doing the Cadillac Brembo + bracket mod instead. Ha, maybe they didn't actually try putting on the STI brembos lol

@GARAGE-xb4be

Жыл бұрын

Maybe the 6pot ones don’t fit but the older 4pot ones do

@ttis3701

Жыл бұрын

@@GARAGE-xb4be Another YT garage Actually put the OEM 4 pot STI brembos on and they mounted up perfectly. The caliper mounts are the exact same on the Kunkle on this gen as the previous gens. So if the OEM 4 pots can mount up, so should the 6 pots, in theory lol.

@GARAGE-xb4be

Жыл бұрын

I wonder if you also need to swap out hubs to get the rotor alignment right

@ttis3701

Жыл бұрын

@@GARAGE-xb4be the rotor alignment was off center by a few mm in the front, rears were spot on. So the other garage machined a 2mm spacer to sit on the inside of the rotor hat for the front and the fitment was perfect and everything else bolted right up.

Great work! I enjoyed the video.

@theiagchannel

2 жыл бұрын

Glad you enjoyed it!

I've been in love with the 22 since it debuted.

Any chance you guys would sell those rotor spacers. I have a set of brembos and a 2022 coming in soon. Lol

I love it,i wish i had a place like you guy by me

My Dreams 🙏🔥

Beautiful just beautiful looks like a newer version of my car

Looking good! Maybe I missed it in the video, but what was the thickness you ended up with on the spacer up front?

Looks amazing!! I'm getting one in September can't wait. Only thing is that I wish that the duckbill on the trunk could have been removed kinda looks odd with both the wing and the duckbill but overall the car looks beautiful!

Best one yet l have seen

@theiagchannel

Жыл бұрын

Thanks Peter!

Honestly, the stock 2022 WRX (regardless of trim level) genuinely needs better brakes if you're going to track it.

At unveil I wasn't sure about the 22 design, man this one sure does look nice though 🔥🔥🔥

Love the fix for the brakes but looks like dba could do it as a option

Just purchased a '22 WRX in the graphite grey and absolutely luv it. It's a wonderful car and very exciting to see the aftermarket take it to another level. 12:20 is a perfect example of what this car can easily be with vision and $5k to 10K. Keep up the good work fellas.

@theiagchannel

Жыл бұрын

Thanks for the support!

To help with the rotor offset would sti wheel bearings/hubs work?

How think did the spacer ultimately need to be for proper rotor spacing?

Should've put the 2020 yellow 6 pot brembos on her 🤌 still looks good though 🙌

I imagine the 6 pot brembos from the 2016 sti onwards will bolt in the same? - nonetheless GREAT video!!! thank you so much!! - how thick are the spacers?

🔥

car is sick

Will there be a kit you guys will offer to install same brake kit? If not how can the public get ahold of the same set up?

I seen Grim Speed add Cadillac ATS Brombo to the front of ther 2022 WRX and the spacer they made for the Front was 12mm It's nice seeing all these different companies make and do upgrades for the new WRX and making it into a Sti which sadly we won't be getting from subi which is a big mistake in my opinion. Keep up the amazing work your doing

@theiagchannel

2 жыл бұрын

Thanks!

@mcgarvinmathurin4352

Жыл бұрын

Thank you for clarifying the spacer thickness 😊

Would the spacers be something you guys would sell or do you think there will be some type of kit that will be released

Bigger brakes...bigger master cylinder with solid ss lines...and master cylinder bracket would be a huge upgrade

Just curious if they’re going to sell the spacer for the front brembos

What wheels are those? They look awesome.

What STI calipers are those, and any difference in bracket?

Badasss 😎

Sweet Subaru Civic.

The WRX that should have been. Actually kinda starting to like the car now. Just a shame it needs THAT much modification to make it appealing.

I like the stock look better.

Now if I just had a CNC machine in my garage. 😂

i feel with everyone putting an sti wing on the new 2022+ wrx, it wont be a hated discussion

Is a STI brake swap kit in development for the VB chassis from IAG?

any impact for removing brake dust shield?

How much would be the estimated cost for all the exterior parts and install?

could you guys whip up a bracket and spacer for the sk (2019+) forester? i heard the sti brembos bolt up, but if the new wrx needed work to fit, im preeeetty sure the forester is gonna need work also since they are on the same platform.

Is there a way you can do a motor swap with the 2020/2021 STI? Drop it into a 22/23 WRX and put sti badging on it??

You all have made the 22 WRX look like an amazing car, It's such a shame how much work the average person would have to do to even make it look decent, Everything looks great, Only thing id do different is have the sides of the spoiler white with the top crossbar gloss black.

@pumpfortnite

2 жыл бұрын

Can’t stand how much people hate this thing 🤦‍♂️ I love mine

@theiagchannel

2 жыл бұрын

Thanks for the feedback

@MKu64

Жыл бұрын

@@pumpfortnite You're allowed to like it - and that's good to hear - but it is not great IMO (yes I have driven it).

@pumpfortnite

Жыл бұрын

@@MKu64 well if youve had a VA then you definitely know it’s an upgrade.

What rotors were used exactly? I didn't see it mentioned or linked.

How much would this cost? Considering doing something like this

Were is your location?? Amazing work guys 😍😍😍

Why don't the seat headrests, at 11:57, have the WRX logo embroidered onto them? Every other 2022 WRX video I've seen of the interior seems to have the embroidered WRX in red.

It looks like the championship white type R FL5

You guys going to sell the spacers ? Planing on doing brembos and definitely going to need those spacers

So what I’m gathering here is that the biggest complication is the rotor. Do the factory rotors line up with the STI brembos (obviously the diameter would be off, but it would help gauge) curious if a larger factory rotor would work with the brembos without spacers ie, ascent/forester/outback rotors. Only concern with using the spacer behind the rotor is that the hub no longer stick out and doesn’t allow for the wheel to sit on it anymore. Maybe The final version of the spacer should have a longer lip to account for the difference to still provide a mounting surface for the rim. Good job overall guys!

@theiagchannel

2 жыл бұрын

Due to the diameter, you unfortunately won't be able to use it.

@XGTR24X

2 жыл бұрын

@@theiagchannel custom 2 pc rotors would work with spacers at from of rotor.

um... I only want these guys modding and working on my wrx LOL! Wow!

Are we able to order these Brembo brakes? What type of wheels do you got on this?

How sick? Where's the intake though?

How thick are these spacers and were can I get them?

Soooo……….. when can I come by for you guys to install some STI breaks and the AOS on my 22? Awesome video as always!!

@theiagchannel

2 жыл бұрын

Thanks for the support!

What was the part number for the arp lengthened studs?

The spoiler would look much better white and just the middle part black or white completely

Do you guys sell the spacer necessary for upgrading the front brakes to the STI calipers?

@theiagchannel

Жыл бұрын

We do not unfortunately. But hit up our sales team for a possible solution!

So are these actual sti brakes, or the brembos off the 2020 wrx with the performance brake package?

@theiagchannel

Жыл бұрын

We used STI brakes for this conversion.

The STI brembo upgrade is something I definitely want to do to mine.. Which years STI Brembos did you guys go with?

@travr1131

Жыл бұрын

Those look like the same calipers on my 2015 STi. If so, then 2015-2017 STi would work.

@yuhmadorwah

Жыл бұрын

Are they selling the spacer kit?

It looks fucking sick now, to bad Subaru didn't make it look like that from get go. Great job guys!

@theiagchannel

2 жыл бұрын

Thank you

Yusss

Looks like the part number for the hub is the same, I wonder if you could swap the whole STI knuckle over

@XGTR24X

2 жыл бұрын

Try already, can't ball joints different

Fbo and tune plz

Damn you guys are making me wanna trade in my STI for a WRX lol, love the work you've put in... keep up all the hard work 💪

@theiagchannel

2 жыл бұрын

Thanks!

@angelruizvillot2665

Жыл бұрын

Me too.

Question, do 18 inch wheels fit the base model or do you have to stick around with the 17 inch?

@ZibrayMusic

2 жыл бұрын

Every trim above the base model comes with 18s so you should have no problem.

@pumpfortnite

2 жыл бұрын

18s will work, so will 19s

How thick of a spacer did you need under the front rotor I'm really wanting to do this and I have the machine equipment to do it I just need to know how thick of a spacer i need

@stevenvega6284

3 ай бұрын

Did you get the answer to your question? I am also looking for the answer. Just bougth a set of brembos.

Where’s you shop?

That white makes me regret getting the dark gray!

@roberttrojan9037

2 жыл бұрын

Red and white on this generation look the best imho

@pumpfortnite

2 жыл бұрын

Same, I do like how the MGM blends the cladding tho

💯🔥🔥

When’s the aos kit going to be available for purchase for a 2022?

@theiagchannel

2 жыл бұрын

We have a bit to go with testing but we're hoping soon soon soon!

I'm really surprised you guys didn't go with the 18+ 6pot brembos instead of the 4pot brembos

@theiagchannel

2 жыл бұрын

This is what we had on hand at the moment

@Dragon151415

2 жыл бұрын

@@theiagchannel are you guys going to look into trying the 6pot brembo down the road as well?

Killin it. Was there any reason for choosing the 4-pot over the 6-pot? Or was it just what y’all had on hand?

@datboijon

2 жыл бұрын

I believe they mentioned in a previous video that they had that sti kit laying around.

@theiagchannel

2 жыл бұрын

Bingo!

imo, that spoiler does not really integrate in the cars design. would suggest a larger one with more rectangular shapes

👏🏼👏🏼👏🏼

Sheeeeesssssshhhhh

why are you making it look like the sentra nismo....???

Debated between old an new wrx models after seeing what you created I’m going for a new one thank you guys !

Space the caliper not the disk.

This is making want one to be honest

Yassssssssssss.

@brentdeyoung7778

2 жыл бұрын

OMG yaaaaaassss

@Lakeshow1996

2 жыл бұрын

YAAAAAAAAAAAS

I hated the 22 wrx look but slowly but surely growing soo much on me 🤣

@theiagchannel

Жыл бұрын

We hear that a lot!