The speed is impressive but that sound is incredible!

that noise always blows my mind

Awesome nice video and very interesting to see how good the Avanti is performing, greetings from the flying brothers from Belgium, Remi & Tom 👍

Well, you have done it again and inspired me to push this jet even harder. Well done 👏

Avanti is the best allrounde jet

Nice to see videos from you again! Keen on your next video about the batteries. Holy Moli 😉

*bonkers* 301km/h amazing

Holy crap. Thats a serious speed increase from simple mods

Outstanding, love that data and glade your back to making good informational videos. Can't wait to see the battery updates 👏👏

Awesome and inspiring

I am pretty confindent you started using Molicel P45B li-ion cells - based on the 4500mah capacity :) I have been using them for some time, and now I am replacing all my old Molicel P42A packs with them for EDFs. Its just no contest anymore - due to significantly lower internal resistance P45Bs are a beast compared to any previously available cells. The old ones get sold or used to power warbirds, where performance does not matter.

@bestcoubtv7422

Жыл бұрын

I think its 40T3, but maybe you are right.

@MrStefangyro

10 ай бұрын

Wow very impressive

This is so cool! 🎉 keep up the good work!

I don't know anything about this subject, but your passion and excitement is great to watch :)

swietna robota😮

I also have Avanti with 12 blade JP 80mm edf. You inspired me to make some li-ion 6s packs and they are awesome! I use samsung 40T 8000mah (2 x 4000mah paralel) and I get from 8-10min of flight easily. I cannot imagine how can be even better batteries that you say in a video. I fly sport and aerobatic also, but not pushing too much with the speed all the time so the flight times are umbelivable for edf. Thank you and keep up the good work 👍🙂

@alwaysflying6540

6 ай бұрын

Do these mods with your fan motor setup!!!!

I have also noticed that my recently bought Avanti seems to be glued together less strongly. Especially the control horns and the fixtures for the tricycle undercarriage need a check. Also the new servo's have more play than the older ones. I have an X45 (45N thrust) turbine in it and only go full throttle for about 3 seconds or slightly longer in vertical climb. The fear of the plane desintegrating is always there!

Can't wait for you to get the Carf Rebel Hot and push it to its limit, like you did with Avanti 🤪

Awesome man

Really cool 😎

Great job.. too bad something cooked! My 6S Avanti is one of my favorite jets. This makes me want to go 8S !!!

@EDFjetRC

Жыл бұрын

The magnets in the motor exploded :)

@rcplanesandfriends3067

Жыл бұрын

@@EDFjetRC Wow! Too many RPM's or poor adhesive on the magnets..lol

Very good video very interesting to follow.

@andriasthomsen1868

Жыл бұрын

looking forward to the video with new li ion batt 🙂👍

I run mine on 8s2p8400 P42a cells @139A and flight-time @9 minutes on the stock 6s inrunner. Edge 130A es. My favorite edf until the Odyssey arrives lol.

You think you may try a Sebart Avanti? Your really pushing the limits on that Freewing. Always enjoy seeing what you do with that plane. 🤩🤩🤩😎

@EDFjetRC

Жыл бұрын

I was abusing Sebart Avanti and I think I will come back to it soon :)

Maybe the Havioc Xe airframe... if you can find one ... 😆 nice flying great video. Cheers 🍻

Wow fast

Hi, Great video, like the previous ones. Where do you buy these Li-ion batteries?

So cool! Can't wait to learn about the batteries. Have you ever though of messing with some warbirds? Would love to see what you could do with the Freewing F4.

Holy !! That thing is super fast I can’t believe that thing doesn’t just explode mid air !!! Nice nice nice … what is you your setup ? I might have missed that and am asking a silly question ? Thank you

Crazy Wojtek whats up. I'm putting the Blackhorse on 16S, you think the ZTW ESC will handle it. In your set up with the 120 Pro you said it will handle it just making sure.

@EDFjetRC

Жыл бұрын

It will be OK :)

Why on takeoff is it pulling the Avanti to the left? Also, do you think the same setup will work on the Freewing L39?

@EDFjetRC

Жыл бұрын

I was taking off with too low speed and it tip stalled. L39 has a smaller wing so it will be a bit harder to land.

Czesc, fajne masz to gadajace radio. Jaka to marka? Pozdrawiam

Siła która spowalnia twój samolot jest zależna od współczynnika oporu tego „dopracowanego” modelu a także od gęstości powietrza ( temperatura i wysokość) w warunkach normalnych przy temp. 0 i ciśnieniu 1013hpa 1m3 powietrza ma gęstość 1.293 kg/m3 w lecie przy temp. 30 st. powietrze już ma gęstość 1.165 i to tylko przy powierzni ziemi zrób tą samą próbę tym samym modelem w lecie na wys. 300 metrów (pamiętaj jednak że 120 metrów to chyba max dla modelarstwa)

Jeśli chodzi o baterię to pewnie molycell 45 amps. Lataj wyżej tam powietrze jest mniej gęste więc proporcjonalnie opór jest mniejszy

I want to learn your kind of crazy😁

Hi...I was checking the specification of the Motor HET 700-68-2250kv and the website mentions it works with only 6s. Why Did you mention you are using 8s ? Thanks.

@Rippin-Rich

11 ай бұрын

It is only rated for 6s thats why his burnt up lol. I have flown mine on 2x 7s4500 liions. Scared to try 8s.

Sir I want to become rc plane having 2kg weight I will use edf 70mm- 6s motor then tell me which is suitable battery for this rc plane mAh??? C??? For flight time 10-15min Please reply me sir I request you

How is it your avantis make that woosh sound ? They typically don't. They usually make that annoying whine sound.

I am interested in doing EDF on the new Hanger 9 Aermacchi M339. Have you seen this jet that is coming to the market soon and if so, any thoughts

New Tesla Li-Ions? :)

I'm loving the quality of your videos! If i ever drop more cash on a new jet, the Avanti is probably going to be it. What a pretty bird. 🐦 🦜 🦚

@jmoestretti

Жыл бұрын

What was used to cover the wing in orange?

@nickhayley

Жыл бұрын

@@jmoestretti he says in the video.