#Frankingston
Автокөліктер мен көлік құралдары
Finally back on the 6 4. We busted out all of the bodywork and got the frankingston in a thick coat of 2k primer! Done a little por15 on the inside to seal it up and make sure nothing ever comes back! Next on this project we will hopefully be starting the frame so we can get this thing back on its wheels soon! Stay tuned. Thanks for watching. Like, share, subscribe.
Пікірлер: 45
god lock from sweden
Nice job!... Can’t wait to see it all done 👍🏼
@bpbrestorations2093
4 жыл бұрын
Thanks!
Beautiful work need mine done Keep it up
@bpbrestorations2093
2 жыл бұрын
Thank you
Looking good. I’m considering doing quarter panels. Seems like it would turn out better than patching rust and allow a person to take care of underlying rust issues like you did. Great job.
Man that's some super nice work
@bpbrestorations2093
2 жыл бұрын
Thanks bud
Great job 👍
Second time I watched this video...awesome work!
@bpbrestorations2093
3 жыл бұрын
Thanks Hank!
Very helpful video. U do killer work man..good job
@bpbrestorations2093
3 жыл бұрын
Thanks I appreciate it
Dope work. Been following this build. Motivational video💪🏾😤👍🏾
@bpbrestorations2093
3 жыл бұрын
Thanks bro!
Looking good
Good job
Amazing.
Looking again. I see what looks like rust but now I see it may be a brown color that is under the blue green color.
@bpbrestorations2093
3 жыл бұрын
O yes I see what you are talking about now. You are correct.
10
@bpbrestorations2093
2 жыл бұрын
12
Nice!!! Forgive my ignorance but looked like there was some rust left on the hard top. Could you briefly touch base on that?
@bpbrestorations2093
3 жыл бұрын
Only surface rust, sand blasted with spot blaster and there was nothing thru. Then we use rust encapsulater, epoxy primer, body filler, surface primer, then paint. To make sure there will be no issues to come.
👍
👍🏽
If I have a 1962 convertible Impala, with rusting floors, would you avoid putting it on a rotisserie? Would you replace the floors, keeping it on the frame?
@bpbrestorations2093
2 жыл бұрын
I would build a frame out of box tubing inside the car and weld it all up then put it on rotisserie and when I'm all done I would cut the box tubing frame back out and reuse it on another. If you can't do that then yes I would avoid lifting it.
@tepp4083
2 жыл бұрын
@@bpbrestorations2093 When you say building a frame inside the car, do you mean bracing the car? The way I see builders put X bracing inside the car?
@bpbrestorations2093
2 жыл бұрын
Yes, but with a vert it doesn't hurt to include a few extra bars
Nice job been watching your videos,..?what size is your garage
@bpbrestorations2093
2 жыл бұрын
45 x 50
What would you charge for something like this man? Awesome work
@bpbrestorations2093
2 жыл бұрын
This car is going to be fully LS swapped and all, he will have roughly 35k in it. It's almost done too!
What filler do you use also what tool you use to create the flange for the quarters
@bpbrestorations2093
10 ай бұрын
Astro pneumatic flange tool, and generally duraglas for body seams and z grip or 3m platinum plus filler over that
I’m doing a 65 impala. The quarters and trunk drop offs. I’m having a hard time finding the trunk drops to match my quarters. I bought a pair from classic industries but they are not the right shape around the bottom rear of the quarter. Any ideas where I may find different ones then those at classic industries?
@bpbrestorations2093
3 жыл бұрын
Goodmark.... www.ebay.com/itm/Trunk-Floor-Extension-Drop-Off-Panel-1965-66-Impala-Left-Right-Side-Pan-/400495648591?_trksid=p2349624.m46890.l49292
@bpbrestorations2093
3 жыл бұрын
Dynacorn......www.ebay.com/itm/1965-1966-Chevy-Impala-Trunk-Floor-Drop-Off-Pair-Right-Left-Side-WTP-Metal-/383487449898?_trksid=p2349624.m46890.l49292
@AC-uu3gj
3 жыл бұрын
@@bpbrestorations2093 how much does it cost to have the 2 quarters done I've got a 63 ss I want to do the same thing you've done. You make it look easy
@bpbrestorations2093
3 жыл бұрын
Anywhere between $1800 to $2200 per side including parts and material to install quarters and body work and prime them.
do you have a link for that flange, for the q.panel
@bpbrestorations2093
3 ай бұрын
Astro 605ST ONYX Straight Type Punch/Flange Tool a.co/d/2aCZsbo
how big of a rotisserie did you need for the Impala? poundage?
@bpbrestorations2093
2 жыл бұрын
3k