Find me on Instagram: instagram.com/rajeshzmoke/ Facebook: facebook.com/rajeshzmoke/ Gmail: rajeshzmoke@gmail.com

@Shri_Hegde

2 жыл бұрын

Hi can we use this for Honda cb 200x

@RajeshZmoke

2 жыл бұрын

@@Shri_Hegde i dont think so, it is specifically made for KTM 390 adv

@bantigueoutdooradventures

Жыл бұрын

Hi, can i use this on a Husqvarna Svartpilen 401?

Unfortunately this type of fork extenders, extend the forks by 40 mm, not "about an inch" or 25.4 mm as mentioned in the beginning of the video above, nor 30 mm as mentioned @3:22 This causes a problem in the lower triple clamp: In the standard position, the fork legs start to taper about 14 mm above the bottom triple clamp. Going from Ø 54 mm 14 mm above the bottom triple clamp, to Ø 51 mm just below the top triple clamp. With the extenders mounted, the transition from the normal cilindrical clamping part Ø 54 mm, to the tapered part, is now located in the middle of the lower triple clamp. This ofcourse compromises the stability of the connection between the lower triple clamp and the fork leg, and could permanently deform both parts due to the uneven load that now acts upon them. (edited for clarity) See also: kzread.info/dash/bejne/i56LtdJ8pMSemKQ.html

@RajeshZmoke

Жыл бұрын

fork legs are tapered? what are you blabbering about ?

@zombiewoof5257

Жыл бұрын

@@RajeshZmoke May I suggest you buy a caliper and measure it yourself, before you start to insult people? That way you would know the fork legs taper from Ø 54mm at the bottom triple clamp, to Ø 51mm at the top triple clamp.

@RajeshZmoke

Жыл бұрын

@@zombiewoof5257 Are you using these extenders? if yes then please make a video about whats wrong and send it to me ...i'm not understanding what issues you're facing.. how does the bottom triple clamp not clamp the fork entirely?

🔥🔥

@RajeshZmoke

3 ай бұрын

🔥🔥

@RajeshZmoke

3 ай бұрын

🔥🔥

Good information! If I get KTM 390, definitely I will get this!

Super, informative and I think you have fully recovered 👍

@RajeshZmoke

2 жыл бұрын

Almost back to form sir

Does this compress the rear suspension ?

@RajeshZmoke

8 ай бұрын

Not much

👍👍👍

I like the 390 and add that it appears to need more ground clearence.

@RajeshZmoke

9 ай бұрын

This mod gives you ground clearance

Have you ridden all the trails with the extenders on ?, no issues with them ?

@RajeshZmoke

Жыл бұрын

Yes all hardcore offroads with these extenders... No problem

Nice mod on the front suspension...how does the rear suspension cope with the front modification? Any spacers need in the rear suspension too?

@RajeshZmoke

Жыл бұрын

this mod basically removes the front bias of the bike and makes it even, so no real modification is needed for the rear suspension....you can add more preload in the rear (stock is 3 clicks, i'm running 5 clicks)

@vijey18

Жыл бұрын

@@RajeshZmoke I am not on either Facebook or Instagram....any other way to place the order for this product?

@RajeshZmoke

Жыл бұрын

@@vijey18 telegram? Message me @Zmoke or send me an email rajeshzmoke@gmail.com

Will u make front fork risers for Hunter 350

@RajeshZmoke

8 ай бұрын

No

Where did you get the bar risers?

@RajeshZmoke

2 жыл бұрын

Its from a company called Zana Motorcycles

Hola!!! Me encantan estos extensores, y te quería preguntar si me enviarías un par a España. Espero respuesta,es lo mejor que e visto para nuestra moto

@RajeshZmoke

Жыл бұрын

new batch of fork extenders are coming next week , i can send you a set to spain. message me in fb or instagram or send me an email

What about the headlight being adjusted too?

@RajeshZmoke

Жыл бұрын

Headlight you have to tilt it down via the adjuster

What about the kickstand? Need modification?

@RajeshZmoke

Жыл бұрын

Not needed, the bike tends to lean a bit more but not an issue

Super brother very informative 👌. Bro i also own 390 adventure. I installed 2 inch raiser(45mm) from carbon racing. My brake cable is very tight don't know which brake cable to change. You have any idea 😊.

@RajeshZmoke

Жыл бұрын

I'm also using a 2 inch riser I've haven't changed the brake cable

@striker1011

Жыл бұрын

@@RajeshZmoke ohk thanks for your reply

@williamrae9954

Жыл бұрын

Venhill Engineering in England if you even need longer cables...custom made

@striker1011

Жыл бұрын

@@williamrae9954 Thanks a lot for your reply 😊

Can you do that for Himalayan bs6

@RajeshZmoke

Жыл бұрын

why do need it for himalayan?

Hi, were can i by one? Im from aegentine

@RajeshZmoke

Жыл бұрын

I'll inform you when new stocks arrive

Finally upload maadidri

@RajeshZmoke

2 жыл бұрын

Howdu bro ❤️ ...bega vlogs upload madoke start madthini

Hi can you make extender for xpulse?

@RajeshZmoke

Жыл бұрын

Why do u need extenders for xpulse?

@robindogra2258

Жыл бұрын

@@RajeshZmoke because I don't want to spend on rally kit buy I want the same size of rally kit with the stock suspensions

@RajeshZmoke

Жыл бұрын

@@robindogra2258 ok let me see

Very good video! Where can i find this fork extender?

@RajeshZmoke

2 жыл бұрын

you can dm me on instagram or facebook i'll ship it to you, check the pinned comment or in description

@giorgioferrara26

2 жыл бұрын

@@RajeshZmoke do you see the dm on Instagram?

@RajeshZmoke

2 жыл бұрын

@@giorgioferrara26 yes got your dm

Vera level bro, wide range of audience ah? Namba vangara 5, 10rhuku theviya 😂😂😂

@RajeshZmoke

2 жыл бұрын

Wait and see bro 😁

Bro where can I order this ?

@RajeshZmoke

2 жыл бұрын

Send me a dm in insta or Facebook...links in description

I would want two bolts minimum on the clamp to trust it.

@RajeshZmoke

9 ай бұрын

Then you have to make one yourself