13mm bolts - 53nm 36mm hub nut - 250nm initial 500nm final. torx50 - 23nm+90degrees. source autodata.

@hosuandreiremus

4 ай бұрын

Thats fantastic. I will add this to the description. Thanks.

Brilliant demonstration I like these real time jobs, can clearly see this wasn't prerecorded and set up to look easy 👍

@hosuandreiremus

5 ай бұрын

Glad it was helpful!

Thanks for posting these videos. Super helpful. Doing, front discs, pads, bearing kits, shafts and suspension arms (drivers and passenger side) this weekend!

@hosuandreiremus

6 ай бұрын

Sounds like an expensive weekend.

@ScotttyDoo

5 ай бұрын

@@hosuandreiremus Unfortunately so, but a fun one I hope.

Really helpful thank you

Hi mate, can i ask where you got the kit from? Im about to do mine and id rather buy that than mess about with trying to get the bearing off the hub. Thanks.

@hosuandreiremus

6 ай бұрын

Here is the link to the one I bought. I was very suspicious about it considering it is much cheaper than what you find at the autoparts store lige GSF. For me this worked and I ended up buyng 2 of them to change both sides. www.ebay.co.uk/itm/154878062126?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=bhr__gI-TU6&sssrc=4429486&ssuid=UY1yfXLcR9K&var=&widget_ver=artemis&media=COPY

@kelloekayaker

6 ай бұрын

@@hosuandreiremus thanks for that, ive put an order in. Cheers👍

Couldn't you have half screwed 13mm bolts back in, then put wheel back on, and when u tighten bolts, would have pulled bearing away while assembled on van? Just thought of that as that's the trick you used to separate bearing and disks, which I used to do mine 👍

@hosuandreiremus

5 ай бұрын

I dont think those bolts are long enouhg for that trick to work.

have you got torque specs plz?

@hosuandreiremus

5 ай бұрын

I don't have a workshop manual. I looked online for torque specs and foumd diffetent values on different forums and dont want to give anybody wrong information.

@Pigeon_Loft420

4 ай бұрын

@@hosuandreiremus 13mm bolts - 53nm 36mm hub nut - 250nm initial 500nm final. torx50 - 23nm+90degrees. source autodata.

Good video, but why not just use the gun to undo it?

@hosuandreiremus

5 ай бұрын

The gun is not powerfull enough. I tried.