I’ve just done this job on 2010 Fiesta and put a long socket extension bar through centre of old bushes - drilled some rubber while levering my long bar and old bushes came out very easy!!!
@MrUnderwurldeАй бұрын
Nice video but I don't think its a good idea to refit the new bushing by drawing it in by the core - you could end up damaging the new bushing. The best approach is to use a cup that is the same size as the outer casing and draw it in that way. There is a bit of a profile on the circumference but doesn't interfere too much with the installation.
@user-kz2rx8yu2f2 ай бұрын
Nicevone Mark glad to have you back
@ResurwreckAutosUK
2 ай бұрын
Thanks mate yeah had a lovely long weekend away 👍👍
@richardhawkins69602 ай бұрын
Hi Mark even though it looked a tough job you made it look easy well done Mark 👏😓
@ResurwreckAutosUK
2 ай бұрын
Thanks mate yeah definitely not a easy job just got stuck it 👍👍
@nigelbryant59322 ай бұрын
That tool was money well spent. Didn’t look that bad of a job. Will be easy next time. Great to see you back 👍👍
@ResurwreckAutosUK
2 ай бұрын
Thanks mate yeah definitely will be easier next time 👍👍
@richardmounfield78222 ай бұрын
Nice work with the new bush tool Mark.
@ResurwreckAutosUK
2 ай бұрын
Thanks mate yeah great new tool definitely be using that a lot more 👍👍
@johnchincotta1qwdb152 ай бұрын
Well done Marcus
@danielsellers85382 ай бұрын
Nice one, budy. Thanks for your vido
@ResurwreckAutosUK
2 ай бұрын
Thanks mate appreciate it 👍👍
@KerbsideClassics2 ай бұрын
nice one mark made it look easy mate
@ResurwreckAutosUK
2 ай бұрын
Thanks mate it definitely wasn’t easy but got it done 👍👍
@howj42 ай бұрын
Good job done
@leewalerzak2 ай бұрын
Iv done a few of these nows an hours job once you know what your doing I use a reciprocating saw to cut them out then put poly's in no special tool required
@charliecoco21152 ай бұрын
I've seen some mechanics on certain cars having to burn those bushes out with a blow torch.
@wayneedge4216Ай бұрын
What size socket and spanner did you use on the re fit tool
@wayneedge4216
Ай бұрын
Thanks
@keithr36822 ай бұрын
Hi mate use a airsaw cut them out and airchle to cut it out
@keithr3682
2 ай бұрын
Sum r metal
@Toby_the_Glen2 ай бұрын
Don't forget the threaded bar doesn't last very long. You will be replacing it every couple of bushes! Next time just stick poly bushes in.
@ResurwreckAutosUK
2 ай бұрын
Thanks mate appreciate the info 👍👍
@BRM101
Ай бұрын
No you don’t the threaded bar should meet years mine has
@andrewcreaser41862 ай бұрын
Get Yr self a tin of rubber grease .. red stuff and makes jobs easier . Also don't effect rubber like norm grease does . 😮
@MrUnderwurlde
Ай бұрын
Not supposed to grease bushings for installation - they are supposed to be a tight friction fit and using grease could cause them to rotate. Best to use a bit of washing-up liquid as that still helps with installation but will will dry off.
Пікірлер: 28
I’ve just done this job on 2010 Fiesta and put a long socket extension bar through centre of old bushes - drilled some rubber while levering my long bar and old bushes came out very easy!!!
Nice video but I don't think its a good idea to refit the new bushing by drawing it in by the core - you could end up damaging the new bushing. The best approach is to use a cup that is the same size as the outer casing and draw it in that way. There is a bit of a profile on the circumference but doesn't interfere too much with the installation.
Nicevone Mark glad to have you back
@ResurwreckAutosUK
2 ай бұрын
Thanks mate yeah had a lovely long weekend away 👍👍
Hi Mark even though it looked a tough job you made it look easy well done Mark 👏😓
@ResurwreckAutosUK
2 ай бұрын
Thanks mate yeah definitely not a easy job just got stuck it 👍👍
That tool was money well spent. Didn’t look that bad of a job. Will be easy next time. Great to see you back 👍👍
@ResurwreckAutosUK
2 ай бұрын
Thanks mate yeah definitely will be easier next time 👍👍
Nice work with the new bush tool Mark.
@ResurwreckAutosUK
2 ай бұрын
Thanks mate yeah great new tool definitely be using that a lot more 👍👍
Well done Marcus
Nice one, budy. Thanks for your vido
@ResurwreckAutosUK
2 ай бұрын
Thanks mate appreciate it 👍👍
nice one mark made it look easy mate
@ResurwreckAutosUK
2 ай бұрын
Thanks mate it definitely wasn’t easy but got it done 👍👍
Good job done
Iv done a few of these nows an hours job once you know what your doing I use a reciprocating saw to cut them out then put poly's in no special tool required
I've seen some mechanics on certain cars having to burn those bushes out with a blow torch.
What size socket and spanner did you use on the re fit tool
@wayneedge4216
Ай бұрын
Thanks
Hi mate use a airsaw cut them out and airchle to cut it out
@keithr3682
2 ай бұрын
Sum r metal
Don't forget the threaded bar doesn't last very long. You will be replacing it every couple of bushes! Next time just stick poly bushes in.
@ResurwreckAutosUK
2 ай бұрын
Thanks mate appreciate the info 👍👍
@BRM101
Ай бұрын
No you don’t the threaded bar should meet years mine has
Get Yr self a tin of rubber grease .. red stuff and makes jobs easier . Also don't effect rubber like norm grease does . 😮
@MrUnderwurlde
Ай бұрын
Not supposed to grease bushings for installation - they are supposed to be a tight friction fit and using grease could cause them to rotate. Best to use a bit of washing-up liquid as that still helps with installation but will will dry off.
you learn somethink new every day????.