Forscan is a free Ford Specific Diagnostic Software: Download Here- forscan.org/home.html ELM 327 Adapter I Recommend- amzn.to/2GC6dBj As an Amazon Associate I earn from qualifying purchases. My Automotive Repair Shop BSG Automotive- www.bsgautomotive.com

@davehallier8584

3 жыл бұрын

You nailed it! Exact issue with my 6R80. Trans was replaced by dealer previous owner, but they did not change TC at the same time. I only suspected TCC after all this time, until surging at highway speeds started to show up. Only an intermittent shutter in first gear for a moment, then okay. Was an inconclusive diag without YOUR video here… thank you so much!

@ramilex3

3 жыл бұрын

Is that the software you use for your diagnostic computer or do you use the Ford factory software?

@pulltab49

3 жыл бұрын

Have a question ? Does a 2012 F350 have an auto bleed for the brakes and abs pump programmed in the ECM? Have been watching and using your vids for years ! Thank you !

@FordTechMakuloco

2 жыл бұрын

I use the Ford stuff.

Owning the right tools is one thing, being able to solve issues is another, Great work Brian, like to see that the tools and data given are understood correctly and problems are solved!!!!! Another awesome video.

As a ford apprentice, your channel help me alot. I appreciate what you're doing. Keep up the good work

so history repeats itself, I couldn't say how many torque converters I changed in the old Crown Victorias and similar because of the shudder issues back in the early '90s. Great info as always, Thanx

great info ... i have an 09 f150... and plan on keeping it for a few more years.. now i know what to look for IF that problem arises

Bravo, Brian! You really know your shit, dude! That Ford software continues to impress me. Substance over window dressing. I've watched you use it for years gathering evidence and data. See ya layda 😎

@collinhopper7542

3 жыл бұрын

Most Master Level Ford Tech's know their stuff.

Very nice explanation and demonstration, sure appreciate your sharing of experiences. I have observe slight variations in tachometer RPM in another older vehicle as the transmission was shifting gears. Pending failure? Further investigation showed it was just a normal condition as the Torque Converter Clutch was being modulated intentionally by the computer to allow a bit of slippage during the shift, softening the shift. Its amazing what you can see.

Really great diagnostic video.

A local construction company owner, had transmission issues with his new f-150. The dealership couldn’t figure it out. The truck owners sister just happens to be an engineer at Ford. She brought her laptop back to Colorado, reprogrammed the transmission. Problem solved. Nice to have a smart sister that works at Ford !

Can you please make a detailed video about IDS usage and common trouble shooting with IDS or tips for common DTCs? Or diagnosis special DTC,s with IDS

Another great video. Experienced this on my 07 expedition. Would surge and vibrate in partial lock-up (about 400 mA TC solenoid current) but would go away at full lock ( about 700 mA TC solenoid current). TCC slip spiking upto 100 rpm at partial with zero slip at full.. Could drive down the highway at 60+ no problem, but would be a problem at 40-55 mph.

@D2O2

Жыл бұрын

@Legos37 I went with a reman trans from ETE Reman since the unit already had 180k miles on the clock. No sense putting a new flagpole on a condemned building.

@dylanlee982

Жыл бұрын

I’m having same issue on my 08 navigator, this basically confirms it’s the torque converter and not a misfire😭 I just got it too now I’ll have to spend a couple grand fixing it

When my 2010 started doing this at 135k, I thought I was hitting some rumble strips. Dealer had no idea what it was. I thought it was a misfire also until I noticed the tach. After seeing the RPMs go slightly up when it happened, I realized it was a clutch slipping and only during TCC lock-up. It only does it at the slightest amount of throttler. I have learned to just goose it a little more. There is some stuff on the market called Shudder Fixx I think. It is supposed to help. I had the latest trans calibration loaded from Ford which did not help. It seems that the lock up clutch just needs more pressure at low throttle. Does it between 30-60mph. Tow-haul mode seems to help. Another great video Brian.

@terrorofdemons1168

3 жыл бұрын

My 2015 had same problem. Disconnect cooler line. Flush 20 quarts new fluid through. Never had problem again. Just like you it felt like I was running over a rumble strip. I tried shudder fix but it didn’t work

@alb12345672

3 жыл бұрын

@@terrorofdemons1168 In the 90s this was a Ford TSB for the Crown Vic trans. Do a complete fluid drain thru the bolt in the torque converter, with Mercon V. They were notorious for shudder. They also suggested a second trans cooler in some cases.

@NoeGonzalez7

2 жыл бұрын

@@terrorofdemons1168 how long has it been running good?

@terrorofdemons1168

2 жыл бұрын

@@NoeGonzalez7 about 20 thousand miles with no problem. I’m going to do the flush every 50k from now on. When I did it I noticed the fluid looked a dark red color then after flushing it was like new fluid again

@astew518

8 ай бұрын

So you're telling me the dealer lied and I didn't need a new torque converter and trans rebuild?

Brian, so what is the fix here? You have diagnosed it very well. Is this a calibration fix, torque converter replacement, ??? Thank you so much!

Another Great Video.

excellent

I've found that Fords, as well as various other manufacturers, will not set a trans code/engine light until the slip is beyond 400 rpm. By then, you know from the seat of you pants that the converter is shot. But for intermittent complaints, I've found that at light loads having the a/c on will recreate the problem every time, from speeds of 38 to 45 mph. I'm not sure why, but at highway speeds, even light loads, the lock up seems to hold, even when the converter clutches are failing.

Please always include the mileage of the vehicle. It gives us a better idea of when to expect an issue like this. Thanks!

@AreaThirteenThirteen

3 жыл бұрын

I have this same transmission in my 2016 F-150 with over 150K miles and no issues yet but I rarely tow heavy loads and it is mostly highway miles..keeping my fingers crossed.

@woolval52

3 жыл бұрын

Being that he said it's a 2010 I'd guess easily over 125K miles. My 2011 has 140K. Luckily, not experiencing this problem... yet.

Forscan is totally awesome tools!!!

It never ceases to amaze me how many problems can be traced to the automatic transmission in cars. I've had a couple of the simpler automatics and had troubles with some of them; but for me, it is manual transmissions for me.

@markbrickey8418

3 жыл бұрын

Sorry for the rant, and this is not aimed at any one person, so please take no offense. But, all this stuff is due to government mandated fuel economy and emissions mandates. Simple cars are no longer an option. Manual transmissions are being phased out. Many models are no longer available with manuals, and most people can't drive one anyway. That's why cars are so expensive, gov't mandates, extended warranties for 5,6 or 10 yrs. and not a little greed for higher profits. As a tech myself, it takes thousands to buy a decent scan tool, not to mention the yearly updates which range from 800-1800. I haven't mentioned multiple thousands for hand tools and special tools/diagnostic equipment. Oh, and did I mention that mechanics are the lowest paid skilled trade, on average? I don't know where it's headed, but electric vehicles are not maintenance free. If anything, they are more complicated and more expensive to repair. Techs will need to learn a whole new skill set for the future.

@garretrocha8

3 жыл бұрын

I have a 5 speed manual ford focus, laughing at all the Powershit transmissions that continue to fail.

@Lexman00

3 жыл бұрын

@@markbrickey8418 Careful... You are insinuating that the government is dumb and it's regulations and meddling usually ends up doing more harm than good,. A lot of people today are bootlickers, they don't take kindly to you blaming government for anything.. Just say, "it's the faulty of greedy capitalist big companies" and follow the mainstream narrative please.

@MrLuisinho90

3 жыл бұрын

@@garretrocha8 Same here, we have a 2012 Fiesta with the 5 spd. It's got 140K miles and even the clutch is still the original. Solid car

@tomnekuda3818

3 жыл бұрын

@@garretrocha8 When my wife and I got married, one of the first things I did was teach her to have the confidence to drive a stick. It was a good investment.

My expedition does that exact same thing but the only difference is when i’m fully on the throttle and that got fixed when i just changed the torque converter

Great video.. I have a 2017 F-150 5.0 with this same issue. The long term solution should be replacing the torque converter I’m assuming? I’ve heard shudder fixx works great. May use that for the time being.

11-17 Explorers and Edges with the 6F50/55 trans would do this too

I have a 05 f150 with 220k miles and the trans fluid has never been changed. I’ve heard mixed opinions on whether it should be done this late in the game or not but it still works fine.

@soundmind192

2 жыл бұрын

In my opinion drop the pan and change filter and clean magnet. If it's never been done you'll have metal shavings and the magnet can't catch the metallic particles any longer. You can grind you trans away slowly.

Can you do a video on replacing the torque converter? That would be very helpful. My 16 F150 with 106k just started to vibrate on highway under quarter throttle or so. I added shutter fix and it stopped. I have done a pan drop and filter change hoping that it will correct the issue but am preparing for when the torque converter needs to be replaced.

2014 STX 5.0 4x4 Hesitant about going into third gear. Took to dealer who could find nothing wrong they claimed it is learning to shift. I would have thought it already knew after 30,000 miles.

my 2017 does this every now and again. i can go a month and it doesn't do this but every now and again it will

Hey man, I was wondering if you had a video on how to remove the transmission on a 2012 Ford Focus sel, thanks let me know!

Oh man. My 2010 is doing the same thing. Even has the TPMS error.

🔥Scan tools are the best🔥

Love your content. Whats your opinion on the 6.2 gas engine?

My dad's 2010 F150 also had a TPMS issue, looks like it's a fairly common issue on the 12th gen F150s! For the record I tried to reprogram all TPMS sensors and only the FR sensor wouldn't give in

@JamesPalylyk

3 жыл бұрын

Isn't it typically a battery issue thou? The batteries in each sensor are only good for 7 years on average and to my knowledge they aren't user serviceable.

@MrLuisinho90

3 жыл бұрын

@@JamesPalylyk I never thought about it but that may be the case here. I've had three Fords in the last eight years (all between 5-10 years old) and only one (Escape) had a faulty TPMS sensor. The TPMS sensors on my 9 yr old Fiesta seem to be OK, though.

@1slkss

3 жыл бұрын

This generation was susceptible to tpms interference from 12v devices plugged into the cig lighter like phone chargers or radar detectors. Typical fix was to replace the actual tpms antenna behind & above the dash glovebox.

Any idea why there's intermittent harsh engagement when the 10R in my 20MY Mustang EcoBoost is shifted into reverse? The whole vehicle jumps.

Could this also help solve the hard knock on shift N to Drive as well subsequent hard shifting 2 to 3rd n 4th

I have the 6R60 that engages hard in first and reverse with some slight jolts in gear changes. Could that also be the valve body in a 6R60 trans?

AWESOME!! My ‘10 has been doing this for a while. I cleaned the throttle body with no luck so then suspected some kind of transmission issue. I’ll hook up the FORScan and perform your test but I’m sure that’s the problem. That said, what is the fix, R&R the torque converter?

@jeremysard

2 жыл бұрын

Same question. What's the fix?

@aarymon

2 жыл бұрын

Fluid change best case scenario. Replace torque converter worst case scenario

@trentoman

2 жыл бұрын

I just changed the transmission fluid exact as recommended. Did not fix the occasional surging issue. I only get mine at 70 mph and RPM at 1,800. Rest of shifting and engaging good.

Great job, FTM! New Ford ad slogan: "You're gonna hate the quality...Ford!...Quality is Job NONE!"

I have a vibration in my 2015 f150 3.5 Ecoboost. Usually I only feel it over 55mph and if I stomp on it occasionally there is a metal grinding noise. Now I have P0151 oxygen sensor low voltage code. Im thinking maybe torque converter but the transmission shop said it checked out great

@tylerchapman5555

2 жыл бұрын

I have the same problem and can not fix it lol have you found any info

@nathanluther39

2 жыл бұрын

@@tylerchapman5555 I fixed all sorts of shit and nothing helped finally I said fuck it and got a flush from the dealership ( I was hesitant because my last Ford had all sorts of problems after a flush ) Anyways, 1000 miles after the flush and it's riding like it is new off the lot. You have to make that decision though. For me I got to the point I didn't care if it fucked the transmission up I was at my whits end. Also, replaced the oxygen sensor off the back of the manifold and it turned the engine light off. Best of luck. The fix is never clear with this issue hopefully you find it out

Hello i was wondering if the 2019 f150 stx has any problems with the 10 speed transmission

I have an 02 VW Passat doing the same thing. especially when it shifts into 5th gear between 30 and 40-45 mph, but this does not occur when the cruise control is set at the same speed. I replaced the accelerator pedal, but maybe this is what is wrong.

I have a 2017 F150 with 6r80, began shifting harder between 3-4-5-6 and had shudder in 5th and 6th. After 3 trips to dealer they finally replaced the torque converter under warranty, doesn't look like they did anything but replace torque converter, no flush, nothing. I had to pay out of pocket for them to replace the trans filter. I'm having the same issues as before, they claim I need to run 1k miles to relearn shift points but the shudder is still there. Shifts still rough at times. I'd appreciate your thoughts on this and what you would recommend.

Mine shifts great, no converter shudder or surging. I have this horrible whining noise coming from trans on cold startup and also whining when RPMs go above 2500. 2015 5.0 V8. I'm stumped. Gotta either be pump or converter.

FordTechMakuloco: Isn't this almost the same issue that the 16+ explorer has? I had to rebuild both my 16s and I had this problem.

I have a quick question about this my truck has a hundred and seven thousand miles I replace transmission fluid and filter twice already does this problem caused by not maintaining your transmission or is it's just something that will just eventually happend

Love the videos. Been to your channel many times for my family of (5) F150s. Have a 6r80 (2010) with a TCC shudder. I looked through your vids to see if you had produced one. A "shudder fix" additive has resolved for now. Things I'd like to know. When drained, how much fluid remains in the converter compared to full? Flushing doesnt seem recommended so is there any value in doing a second fluid change after some short interval? Also, this tranny seems to be in several machines with different weights, engines, tunes and rear ends. The parts houses keep trying to pull for a 4r75e. If opting to replace the TC, how to be certain of the right fitment? Thanks in advance for any answers.

@derek257

Жыл бұрын

I just started having this same issue and the additive worked for me as well. I am going to do a pan drop and filter change but wanted to know if you have an update on your situation. If the shutter came back and if you put in a TCC.

Brian need your help got a p1131. H02s11 ford 1996 lincoln town car check engine light came on . car runs great what you think ?

Question here….. I have a 2017 F 150 4 x 4 XLT HVY DTY Towpackage. Feb 21 I at 93k I had to seek the help of an outside mechanic because the dealership could not get my truck in for 2 months. The mechanic determined that the Torque Convertor was bad and replaced it. Couple of weeks ago the Speed Sensor went out and again the dealership could not look at the truck to diagnose in a timely manner. Went to the shop that did the previous work and they diagnosed Speed Range Sensor bad. BTW I was driving at 70 miles an hour and the truck about ripped my head off and came to a dead stop. Speed Range Sensor is on back order indefinitely my shop can’t get it and the dealership cannot get it. What do I do?

What was the ultimate fix? I have a 2.3 Ecoboost 2017 Explorer that is acting up at 55,400 miles. Erratic shift at light acceleration. Tach jumps 500-1000 rpm, even at steady acceleration. I don’t hear the engine surge though. Dealer says can’t duplicate/no codes…nothing to fix!

Hi my 2003 Ford F-150 super crew has been in the shop for one month the transmission goes from 4 to 2 when you floor it they don’t know how to fix it

Interesting problem and diagnosis (i have a 2011). Just wish you'd state how many miles on this truck, and what is/was the fix? Looking through the comments it appears that you don't answer any questions...

@FordTechMakuloco

3 жыл бұрын

I post a video in the morning then go to work running a shop for 12 hours a day. If I monitor questions all day long then my real life business and customer suffer. Do you understand this, I don’t just KZread all day like some guys.

Im not aure if this is what i have going on with my 2014 f150 EcoBoost but im getting a weird surging but only under moderate acceleration 3000-3500 and when its doing it im seeing boost spikes and then drops over and over. Ive replaced the BOV, throttle body, boost solenoid and both wastegates to no avail. I have no other shifting or surging issues otherwise.

Not related to this video, but do you know what might cause 09 Focus to stall when idling and/or breaking? I cleaned MAF, TB, and replaced head valve gasket, spark plugs, as well as ignition coils (huge oil leak in coils), and still having a stalling problem.

@ronniespring8888

2 жыл бұрын

Check rubber hose going to throttle body.

Can this data be used to verify lock out on a torque converter shudder as well?

I’m hoping you can answer this question, I’m thinking the torque converter is going on my 6r80, I’m not having surging issues like that, however my truck is acting like it’s on tow haul mode when driving, started last week. Takes a lot of rpm to change gears and at 60kph idling at 1500-1700 rpm. Doing a 100 kph, it’s idling at 2100-2300 rpm. I do get sort of a misfire symptom idling. Worse on a hill stopped at idle, Would that be torque converter?

I am having the same issues on my 2012 F150 but also shuddering when I floor the pedal do you know if this another symptom of torque converter failure or a different problem all together

@terrorofdemons1168

3 жыл бұрын

My 2015 had a shudder. I bought 20 quarts of fluid. Disconnected the cooler line. Flushed the 20 quarts through. When I started it was a dark red color then red like new fluid. Never had a problem since. Now I plan to do a flush every 50k

I'd really like to get my car into your shop right now, but sadly you're an hour and a half away. My car has had a U0101 code pop up, and I'm not positive whether or not it's the TCM or wires around it

My 08 Expedition has an issue where when you take off from a stop, under light acceleration, it shifts hard and quick into 2nd and sometimes when you go to give it gas to accelerate up to highway speeds, it feels like it’s dragging an anchor to get up to speed. I just put a new motor in it and new torque converter. What could cause this? It also turns over several times when you start it, from time to time.

@justingeraldi2304

3 жыл бұрын

Sounds like a broken checkball in tje valvebody,,i believe its ball number 7,,not sealing and allowing tje convertor clutch to apply in second,, Was very common in 05 and had a tsb for it

Amazingly I’m sitting at the dealership for a neutral safety type of problem internal. The torque converter was replaced at 93000. Heard a bumping sound from the throttle body air intake sounded like gremlins inside trying to get out. My dealership has informed me that they cannot look at it until November! WTF! Sorry. The part that failed is on back order and the truck is stuck in their lot. I don’t have 10k to rent a car. Poor warranty service.

@pablodread8823

2 жыл бұрын

Hey my 2013 f150 3.5 trany going fr 1 to 3 back to sometimes fr 1to5 back to 1?

I'm looking to buy a 09 to 14 f150. so what is the fix for this problem???

Brian, how many miles does this truck have please? Thanks!

Is there a scan tool for Mac that you would recommend? FORScan is not compatible. 😞

i have a similar problem in my 2010. Made a tune up but the problem still there so is not a engine misfire as you said. is to replace the torque converter or just the torque converter cluth solenoid?

@jameshood3692

3 жыл бұрын

Replace the torque converter

@doncarlos2922

3 жыл бұрын

thanks

My issue is loss of acceleration in between shifts. Like it shuts off the throttle, shifts and then acceleration resumes. Happens between 1-2, 2-3, 3-4 is good, 4-5 & 5-6 hangs before shift. Results are same under load, normal driving and downshift. This all started after I flashed the PCM back to factory with the Diablo i3 tuner. Do I have solenoid hang issues? Do I have to reset the adaptive scale? 2016 f150 2.7 twin turdbowl. Thx.

Recently went to dealership AC barely blowing cold was told “Evaporator core plugged up causing a lack of air flow. Recommended evap core and expansion valve with Evac and recharge.” Quoted $2,615.44 what are your thoughts on that? Thank you 🙏🏽(09 f150 xlt 4.6)

@ronniespring8888

2 жыл бұрын

Does the heat blow hard? Could’ve a bad fan which should be an easy fix.

Very cool Oakley’s

@FordTechMakuloco

2 жыл бұрын

They are just junk sunglasses for work, I have a light sensitivity issues.

@jiggidyjam

2 жыл бұрын

@@FordTechMakuloco I love my half jackets

Would this cause a shudder in 3rd gear while driving around 40-45 mph? I'm also having this same surging problem going down the highway.

@FordTechMakuloco

3 жыл бұрын

Yes it can.

So my tuner says slip percentage record is at 81% at its highest.. I tow heavy with my truck. Is this a bad thing??

Owners manual mentions it does this for heat until coolant reads over 100 degrees

Sir I have a 2012 f150 3.5 ecoboost. I have a slight rough idle in cold start and in park . No rattling at all . Please tell me what I need to get done . 140 on dash

@goatgoat336

3 жыл бұрын

My rpm surge as well .

If you can manually lock and unlock the T/C with no problem and it makes the surge go away (T/C is working) wouldn't the signal to the T/C be questionable? Not critiquing just a question. Last trans I changed was a turbo 400 lol.

@FordTechMakuloco

3 жыл бұрын

We are only turning off the torque converter clutch not the torque converter. In other words it has nothing to do with the torque coupling.

@NY411Info

2 жыл бұрын

@@FordTechMakuloco I explain the TC differently than you. I still explain it to people that it is a lock up torque converter. I do not call it a clutch. I explain it is locked up giving no slip and should be 1:1 ratio as fully locked to the engine. Less confusing to most people...lol.

So replace the tourq converter or is it a failed seal that hold pressure for the tq

@petar443

3 жыл бұрын

So what do you say is the next test ? Maybe test the hydraulic pressure at the test port for TCC ? I mean, if pressure is within spec its the torque converter 100%?

@FordTechMakuloco

3 жыл бұрын

The valves in the valve body generally wear out first causing the damage to the torque converter clutch, so both should be checked for a complete repair.

In over drive, if I let off gas, re apply gas, I have a bump , what you think?

@PBVader

2 жыл бұрын

It might be a dry slip yoke on the drives haft. FTM video shows you how to grease it right. My symptom was a clunk when going reverse to forward cold truck.

So can the transmission be programed so that it is in a permanent state of being unlock?

@TheMagican614

3 жыл бұрын

No it cannot

@joe1273

3 жыл бұрын

It could if you get an aftermarket tune, but the ford oem tool cant do that.

Ok I have a question for you. So do you leave it unlocked? Also If I go to a Ford dealership would they be able to unlock this for me?

@FordTechMakuloco

3 жыл бұрын

No, you only have control to unlock it while using the scan tool.

@RK-kn1ud

2 жыл бұрын

@@FordTechMakuloco This is a very simplistic way of thinking. With some basic electronics knowledge, you can likely permanently unlock the converter. That said, I'm not sure if said methods would cause a CEL making the vehicle un-inspectable in many states.

I really liked the C6 auto Ford had. Great trans, simple function, all this newer technology is nothing but expensive to repair. Do we really need it? It is not like the trucks are now getting 30 mpg with it. My old 1979 F350 with a 460 carb got around 12 mpg, my 2012 F150 gets around 15 to 16 mpg. The 1979 was cheaper to repair.

@ronniespring8888

2 жыл бұрын

Money is the only reason they make this new stuff. With a lot of sensors that can fail too.

How many miles are on the truck

Slip rpm on mine is staying near the desired number but the number moves constantly, is this normal? It is staying in lockup but the number moves up and down constantly. Should the slip number stay consistent while locked up?

@FordTechMakuloco

8 күн бұрын

Yes down to a few rpm.

I've only noticed mine surging at freeway speeds, going up hill or pulling a heavy trailer. It would throw a boost code because my throttle position wasn't matching boost because my torque converter wouldn't stay engaged.

I am not finding away in forscan to unlock or lock is it possible to toggle on and off like you did with the ford tool?

@FordTechMakuloco

Жыл бұрын

I am quite sure forscan is not bidirectional.

@johnnyrizzo8057

Жыл бұрын

@@FordTechMakuloco Thanks for the reply and tip. I googled forscan and bidirectional. There is a control button that can be pressed to activate the unlock and lock toggle buttons. Ty again the channel rock!

Great work !! You really know how to use the scan tool as an assist to help you verify a problem and solution.. Question- I own a 2007 Ford Fusion (original owner) and I have a weird problem. Left front turn signal bulb does not blink on-off when used. Instrument panel shows that during its self-check all exterior bulbs are good and signal indicator on instrument panel blinks normal speed. Bulb illuminates when running parking lights or full lights for night time driving. Ford dealer says its the PCM and would love to have $600+ to resolve. Any help hints you can give me? Thanks ahead of time.

@jeremypike9153

3 жыл бұрын

To verify they are correct you need to test at the bulb socket connector to see if it is pulsing with a test light. If it isn't then it's pretty likely that it is the pcm/bcm whichever is controlling the circuit. The control module should pulse a ground to blink the light. If it does turn out to be the control module you might try finding a used module the Ford dealer should be able to reprogram it to your specific vehicle. Makulco had a video showing how to do it. It's possible that the circuit could be shorted to ground somewhere between the module and the bulb as well. I see a lot of burnt/melted bulb sockets or connectors cause weird lighting issues.

@MrLuisinho90

2 жыл бұрын

@@jeremypike9153 agreed, my Escape showed similar symptoms and it ended up being the socket where the turn signal bulb plugs in. I believe I paid like $10 for it in the local junkyard

@Sheeeeeeeeeeeeiiitt

2 жыл бұрын

@@jeremypike9153 Thanks for sharing with us. I’ve had similar issue with what you mentioned above. Sockets either being partially melted and or untwisting from the actual housing. Intermittent rear hyper flash.

are u familiar with the FDRS as well

@FordTechMakuloco

3 жыл бұрын

I just started using it.

1995 F150 5.0, shift from 1st to 2nd kicks, 140,000 miles, should i try the filter and fluid change?

@justinh8055

3 жыл бұрын

Broken accumulator spring

@vettle1

2 жыл бұрын

If you've gone 140K without changing the fluid..... I've got bad news for you.

@dragonrider9051

2 жыл бұрын

@@vettle1 I got a wrench and a Ridge wallet, lol. I only drove it 15 miles since owning it. Not sure what the prior's have done, looks like the radiator, fan, valve cover gaskets, egr tube have been replaced. I'm currently changing the steering gear box out, and chasing an ac vent leak.

I have an 09 fusion. Does not have a cabin filter. The ac blows cold, but after a while it loses blowing power followed by white vapor. I turn ac off and lots of vapor with more blowing power. Vapor goes away and i repeat to try and stay cool. Whats going on? Please help

@FordTechMakuloco

3 жыл бұрын

Generally this means the evap is freezing up.

@ryanlapoint89

3 жыл бұрын

@@FordTechMakuloco any suggestions on how to fix it? Video? Link?

@ryanlapoint89

2 жыл бұрын

Ok so i have no water drainage from drain tube

So what is the fix ?

My 2011 sometimes will bang up through a few gears after taking off slowly in a parking lot. especially when its cold. putting it in tow mode seems to stop it from happening so much.

@Rockpil

3 жыл бұрын

I have a 2011 that does the same thing. 3rd maybe 4th gear seems to slam when cold. Especially when letting off and it shifts. Might be the lead frame?

What would the fix be? new TC or just a new TC solenoid?

@FordTechMakuloco

3 жыл бұрын

The valves in the valve body generally wear out first causing the damage to the torque converter clutch, so both should be checked for a complete repair.

@jeremysard

2 жыл бұрын

@@FordTechMakuloco Are there DTC codes associated with this problem?

@RK-kn1ud

2 жыл бұрын

@@jeremysard If there aren't any DTCs, I'd just disable the whatever is controlling the clutch an move on with life.

@jeremysard

2 жыл бұрын

@@RK-kn1ud Uuuummmm.....probably wouldn't do that. I do like to repair things correctly and have them work as designed.

@RK-kn1ud

2 жыл бұрын

@@jeremysard you do you. That said, millions upon millions of cars were produced and driven without lockup converters...it's not really necessary. Some repairs just aren't worth the expense/effort.

I guess this was recorded in the winter. The trees are bare

@josephpurvis474

3 жыл бұрын

Tru

@FordTechMakuloco

3 жыл бұрын

yup

So does the torque converter have to be replaced?

@FordTechMakuloco

3 жыл бұрын

The valves in the valve body generally wear out first causing the damage to the torque converter clutch, so both should be checked for a complete repair.

@danieldyer1

2 жыл бұрын

I’m wondering if you catch this early and apply valve body repairs (like a shift enhancer kit or remanufactured valve body), can the concern be resolved without replacing the torque converter?

I have recently condemned 3 farm trucks that were all doing the same thing. I say condemned because they chose to send them down the road vs repairing them. People can say what they want about some of Ford's quality choices in the last several years & I would tend to agree with them on a lot of it but their diagnostic programs are 1st rate. All the Ford programs & system scans take a fraction of the time vs other makes, Chrysler & Toyota being some of the worst. I've seen a Toyota total system scan take over 30 minutes! As far as the TCC slippage is concerned, kinda makes you long for the days of AOD/E4OD. It's either on or off, none of this PWM half-ass engaged crap.

I have a Navigator that has burned up a spark plug Newer plugs 3k miles Any ideal what is the problem?

@yodaiam7521

3 жыл бұрын

Could be the wrong heat spectrum of spark plug, are they OEM? Also could be a to lean fuel to air ratio scenario

@yodaiam7521

3 жыл бұрын

The plug may have not been seated all the way or correctly also

@FordTechMakuloco

3 жыл бұрын

Plugs weren't torqued down and backed off.

Easy to see why mechanics choose ford , fix or repair daily. Making lots of money.

Anyone steer me in the right direction? 11’ f150 5.0 6R80 transmission 122,000 miles. Problem is, I’m driving Im pressing the gas steady. I’m at around 2300 rpm and then it drops some 400rpms. So it goes to 1900 rpm.

What is the average cost of repair? Just a new TC and install?

@FordTechMakuloco

3 жыл бұрын

The valves in the valve body generally wear out first causing the damage to the torque converter clutch, so both should be checked for a complete repair.

Hey I have a bad situation....so I just bought a 2011 Expedition 5.4 3v with 202,000 miles in great shape...the engine sounded great at idle and has plenty of power. I took it for a drive a few days ago and the CEL came on so I pulled over and it was knocking and lots of valve train noise especially on the right bank...so I drove it home (about 40 miles) and started to change the oil (I used synthetic blend Motorcraft and a FL-820-S) I looked up the old filter and it had the WRONG FILTER on it!!!! It was a STP S10590....and there was metal fines in the oil and now the engine has valve train noise (slight to moderate singing/ticking noise) and maybe a slight knock but I’m not sure. What should I do? I’m so disappointed in people who don’t care for vehicles properly. Any advice would be appreciated. Thanks.

@dr7477

3 жыл бұрын

Do timing job (oem parts only) with new roller followers and melling HV oil pump or replace engine. Your choice.

@richardthomas1743

3 жыл бұрын

Well I sure do hope that you did not pay much for it :-(

So, what is the solution...I might ask

@FordTechMakuloco

3 жыл бұрын

The valves in the valve body generally wear out first causing the damage to the torque converter clutch, so both should be checked for a complete repair.

This must have been recorded last winter. Trees and grass are not green.

@FordTechMakuloco

3 жыл бұрын

yup

i love your vids but owning an F-150 and watching them when you don't have any problems is like looking up your symptoms on WebMD. ive become a hypochondriac with my truck lmao

@FordTechMakuloco

2 жыл бұрын

lol

No one can fix my 06 ford escape hybrid I will travel states for you to look at it and actually having it fixed

@Alex-px2mb

2 жыл бұрын

You should contact him through BSG Automotive. I'd be interested to see his video on your car if he takes the job, I have a '10 FEH.

Autumn there already?

@FordTechMakuloco

3 жыл бұрын

soon

So what would be the fix for this?

@sthier24

3 жыл бұрын

Good question

@robertwhite8599

3 жыл бұрын

The fix is $5000.00.

@edman1015

3 жыл бұрын

@@robertwhite8599 Ouch

@FordTechMakuloco

3 жыл бұрын

The valves in the valve body generally wear out first causing the damage to the torque converter clutch, so both should be checked for a complete repair.

@ronniespring8888

2 жыл бұрын

@@edman1015 the answer is SELL OR TRADE IT IN. Haha

dont know where this city or town is but looks depressing man

@Sam_splatter

3 жыл бұрын

He is in the Chicago area. Probably shot this in spring before the leaves came back on the trees.

@FordTechMakuloco

3 жыл бұрын

Everything was dead from the winter just like anywhere that has seasons.