Ford Econoline Throttle Position Sensor Replacement

Here is a quick demonstration of how the throttle position sensor on a 2002 Ford Econoline is changed.
Tools needed-
#2 Phillips screwdriver
Part Used-
Ford PN F4SZ-9B989-AA

Пікірлер: 16

  • @luisfinol9202
    @luisfinol9202 Жыл бұрын

    Una maravilla ❤

  • @benergy100k2
    @benergy100k2 Жыл бұрын

    *Good video.*

  • @poopcoolman
    @poopcoolman Жыл бұрын

    My econolines speedometer is bouncing when idling, I can hear the engine ramping up also any idea what it might be? PLEASE I NEED HELP! Ford econoline e250

  • @vantageoptics3767

    @vantageoptics3767

    Жыл бұрын

    What year, engine and how many miles

  • @pleasantmenace9779
    @pleasantmenace97792 жыл бұрын

    How did u know to replace the sensor my van just started idling really high today and won’t idle back down

  • @vantageoptics3767

    @vantageoptics3767

    2 жыл бұрын

    Didn't know, had a lingering throttle issue that ended up being related to cable routing after the engine change. Prolonged high idle is likely an unregulated air leak after the mass air flow sensor. IAC and PCV systems are the likely culprits. I'd put my money on the rubber PCV line or elbow being cracked and leaking air.

  • @bradleylittle1469

    @bradleylittle1469

    Ай бұрын

    my 96 had iac code i cleaned it came back replaced new iac same code with high idle took it to shop he adjusted the throttle cable itself now runs good

  • @manna5610
    @manna56102 жыл бұрын

    How did you test it before replacing?

  • @vantageoptics3767

    @vantageoptics3767

    2 жыл бұрын

    This was changed as a preventive maintenance method

  • @vlo9018
    @vlo9018 Жыл бұрын

    My 2005 e 250 has been losing throttle response. Wrench light pops up on dash. I come to a stop, shut it off and turn it back on. Could it be the throttle response sensor? @Vantage Optica

  • @vantageoptics3767

    @vantageoptics3767

    Жыл бұрын

    Not likely, use a code reader and see what's going on

  • @vlo9018

    @vlo9018

    Жыл бұрын

    Could it be because I have no Catalytic converters ? Got the code reader P0161: 02 Heater Circuit (Bank 2, Sensor 2) P2107 : Throttle Actuator 'A' Control Module Processor P2110 : Throttle Actuator 'A' Control System - Forced Limited RPM

  • @vantageoptics3767

    @vantageoptics3767

    Жыл бұрын

    @V Lo if you have no converters and no tune to account for them then the answer is simply yes, but it may not be the only problem. Look up the codes and see what they refer to for common issues

  • @jameskelly9800
    @jameskelly9800 Жыл бұрын

    Put the year in your headline. Glad you got a free click. Thanks for nothing.

  • @vantageoptics3767

    @vantageoptics3767

    Жыл бұрын

    Happy to entertain and educate you...your time wasn't wasted

  • @khalilshakeel2581

    @khalilshakeel2581

    Жыл бұрын

    What year is the engine ?