Ford C Max / Focus & Volvo top engine mount leaking oil, easy replacement.
If your top engine mount is wet and leaking oil then it’s knackered. This type of mount is used on several Ford and Volvo cars, possibly others.
It’s called a Hydro Bearing and the original part number is: 326840 or 307396 both these numbers seem to work. (C Max 2008 1.6 petrol DM2)
The bolts on the inner wing are 15mm and the two on the engine are 18mm.
The Torque wrench settings are as follows. (Haynes manual)
Right- hand mounting retaining bolts 90 Nm or 66 lbt ft
Right-hand mounting bracket-to-engine bolts 56Nm or 41 lbt ft
This was on a 2008 Ford C max 1.6 Petrol. (DM2)
Пікірлер: 6
Thanks for the post.
@DARTraderMediaProductions
2 жыл бұрын
Your most welcome, hope it helped you in some way and many thanks.
Same problem on my cmx
@DARTraderMediaProductions
Ай бұрын
Hope you sort it without any drama and may thanks.
You didn't show the actual replacement
@DARTraderMediaProductions
2 жыл бұрын
I could'nt be bothered to go back to the house to get my tripod as it's a bit of a way. It really is just a case of supporting the engine and removing the bolts etc and replacing. Needed two hands to put the mount on as you have to move the engine a little to fit.