Great job on day 2 of the Eco Boost saga - love your energy and enthusiasm to get the job done and done properly

Great video Mark, very informative and good advice. Make cars so difficult to work on these days you are doing a fantastic job

Wow mark nothing would phase me 25 years ago but that is a tremendous amount of work hats off to you well done for giving it a go

@ResurwreckAutosUK

Жыл бұрын

Thanks mate yeah I have been thinking of doing one of there’s for a while now 👍👍

Great to see how far you've come and the things you'll take on now. I've enjoyed watching the journey so far and looking forward to the road ahead. Will be a cracker car when you've finished and provide someone with trouble free motoring for a good few years.

@ResurwreckAutosUK

Жыл бұрын

Thanks mate appreciate your support yeah definitely been a good journey so far nice one buddy 👍👍

Good work mate,you mark good job you repaired this b max mpv Ecoboost engine timing belt and water pump

@ResurwreckAutosUK

Жыл бұрын

Thanks buddy 👍👍

Well said Mark....terrific work your doing love every minute....But...there's always one......

Great effort and content once again, 👍👍

Great video Mark and wow what a lot of work it takes to do this job!! Bet you will be doing the next one tomorrow not 😂😂😂 lol!! Great job and it will be a lovely car when it's been all sorted with the small things that need to be done now! Stay safe and see you soon on the next one Mark

@ResurwreckAutosUK

Жыл бұрын

Thanks buddy I’m really enjoying doing this definitely will do this again 👍👍

Well done mark getting there ,shame your locking kit hasn’t come ,I’ve seen people do it without on youtube . Lee

@ResurwreckAutosUK

Жыл бұрын

Thanks mate yeah I had seen that video 👍👍

What a bugger of a job well done for having a go.l think of i attempted it i would have to remove the subframe complete with the suspension and engine and gearbox so as to have full access to everything.

@ResurwreckAutosUK

Жыл бұрын

Hi mate yeah definitely a pain probably be easier to pull the engine out 👍👍

You're doing a great job mate. Personally speaking I wouldn't touch an ecoburst engine with a thousand foot bargepole..I will stick to my Mazda 2 1.5 skyactive G engine as its a non turbo chain driven engine

Well done Mark.great job your doing. I didn't no there was so muck work involved as I own one. but has been a great car but I'm worried.

@ResurwreckAutosUK

9 ай бұрын

Thanks mate it’s a very big problem if you have a 1.0 ecoboost engine must get it cleaned out about 60k miles or 6 years old

I took one of those oil pumps apart once , had to press the drive pulley off to put it back together as had to put the inside bits in first then the cover

Don’t buy another eco boom. Too much time and effort. Great progress 👍 enjoy your beer 🍺

@ResurwreckAutosUK

Жыл бұрын

Hi mate I’m really enjoying doing this one 👍👍

the filter in the bottom of the oil pump does lever out and taps back in

There were similar issue with the timing chain and the crank pulley bolt on the MG3 pre 2016 stop start

19:35 actually, I saw in one video how they dismantle it and then you can take out the mesh. the question is whether it will hold well after this procedure. Due to this problem, I have an additional oil pressure sensor, not just a switch that says you have (some) or don't have oil pressure. Also pump have two modes most of time engine have 2 bar oil pressure and under load can get up to around 4 bar. Orginal pressure switch gives you a notification when pressure drop below 0.25bar but when oil pump is only partially blocked by pieces of the belt the pressure is reduced, but not so low that the switch detected it. And here we go oil starvation and engine after some time used in this condition is busted. I think typical owner do not know this until engine break up completely, when we get symptoms it's probably too late

Some good pointers Mark certainly with the oil filter back up to the engine, it's more of peace of mind for you knowing it's been cleaned definitely a poor design. Your managing to complete other jobs whilst waiting for locking key to change cambelt & water pump a bit of advice use crectine to mark up with its what typists use on letters when they make a mistake small bottle with an application brush.. Excellent video 😊😊

@ResurwreckAutosUK

Жыл бұрын

Thanks buddy appreciate the info mate 👍👍

@themadcoachman

Жыл бұрын

No one Types letters printed by computer now ,I know you mean tip ex basically mate

@danielsellers8538

Жыл бұрын

@themadcoachman l still type but then l. Old school

As you know I worked at ford stealership and all I did/do is undo it with my Milwaukee m18 impact gun and to do it up I give it full send with lots of dugger duggers and never had a problem and I do these on my driveway on the side.

@ResurwreckAutosUK

Жыл бұрын

Hi mate yeah the mechanic at the end has a Milwaukee m18 impact gun I’ll use that 👍👍

@robertbowes1001

Жыл бұрын

@@ResurwreckAutosUK full charge battery and give it full send it will be ok.

Another thing I’ve seen on KZread is a cover that sealed a waterway with an O ring , on early versions the O ring can burst up like a breather hole and that’s why they lost coolant and overheat failure got them the ecoboom name, apparently that breather hole needs bunging up with a sealant to stop it occurring, allegedly the Ford mod, I don’t know enough about that but saw the video on KZread where a mechanic stripped all the same off that you’ve done 😮

The gasoline and its vapors damaged the belt, and the oil becomes contaminated with gasoline ?

going to be a good car for some one when finished great way to sell with all the work showen online you might want to look at a dewalt or milwaukee 1/2 gun for crank bolts

@ResurwreckAutosUK

Жыл бұрын

Thanks mate yeah I borrowed a Milwaukee gun to remove the bolt 👍👍

@jstuart5430

Жыл бұрын

@@ResurwreckAutosUK good guns i m lucky to have both cant wait for engine rebuild and 1st start up video

Crank bolt you gotta have a torque multiplier to undo & tighten it not blow torch!? or a "bigger gun"

@TimeTraveller3256

Жыл бұрын

I see 👀 thumbs up 👍

@valvemonky4734

Жыл бұрын

there is some one who has shown this on youtube he used a powerfull air gun to get it off

@JohnWilliams-tr7nw

Жыл бұрын

300nm for the crank bolt

@JohnWilliams-tr7nw

Жыл бұрын

Or the crazy priced multiplier 😅

Blow torch on the crank bolt ? May help or maybe see if you can borrow a better impact gun (as in higher power Amps)

@ResurwreckAutosUK

Жыл бұрын

Thanks mate appreciate the info let’s see how it goes 👍👍

This should make this car more valuable than a non cat car. As you said, if you buy a car even if someone has said this expensive job has been done, without evidence of a bill from a ford dealer, you would never know. They can look at this video as proof. In my book, this makes this a valuable car.

But when you do the service, couldn't you remove the oil pan and then clean the filter that you see in the video dirty?

@ResurwreckAutosUK

2 ай бұрын

That sounds so quick when you say it like that

@etrell9553

2 ай бұрын

@@ResurwreckAutosUK "It might be faster than disassembling everything from above. If you remove the bottom pan, you can immediately see the filter with the metal shavings, and maybe understand that it's time to change the belt.

@etrell9553

2 ай бұрын

@@ResurwreckAutosUK The solution is this: Oil Catch Can Kit.😅

Loss of engine power and serious valve damage is commonplace on higher mileage EcoBoost engines.

using the right oil should keep the oil from attacking the belt and clogging up the pickup. It's oil with the specification 'C948'

Maybe ford should include a new oil pickup in the belt kit on the ecoboom engine would be cheaper than a brand new engine.

Ford main service dealer expensive charges to replace the cambelt and water pump and replace oil pump too

The newer ecoboost engines have gone back to a chain apparently.

Eco boooooom. I pick wet belts and oll pumps and much more at parts plus. Bad idea having a nylon belt driving the oil pump. Best to avoid a higher mileage 3 cylinder ford. Well saved and it will keep the next owner happy when up and running.

@ResurwreckAutosUK

Жыл бұрын

Thanks mate yeah definitely avoid the high mileage ones but this one will be a good one for someone 👍👍

Just quoted £1875 by Ford dealer to change cambelt and water pump on 1 litre ecoboost Focus

How many miles has this got mate? Mines 52,000. Worries now 😮

@ResurwreckAutosUK

Жыл бұрын

Hi mate 72k miles crazy 👍👍

If you remove the oil cap, you can see whether the belt is still intact or worn out, but he's making the video he thinks will make him rich.

@ResurwreckAutosUK

2 ай бұрын

🤣🤣🤣🤣

ECOBOOM! But no, the later engines are the same any engine with internal belt are a stupid idea fit a new pump or that strainer cap does come off, bolt pump back to engine & use a slide hammer with a hook & pull it then when clean tap it back in place seen it done

So the belt and pulley is submerged in the oil sump lol 😆

@clivewright4398

Жыл бұрын

Eco booooom 😂. I pick no end of wet belts ,oil pumps, etc. The day in life of a parts plus picker. What a bad idea eco boost engines are..

@TimeTraveller3256

Жыл бұрын

Haha 😮. Is this wet belt a common thing then or only specific to FORDS? You would imagine that a metal chain would have been a better idea for that design ?

@clivewright4398

Жыл бұрын

Peugeot, have a similar problem!

Lots of questionable design decisions. When you get the crank bolt off, you will notice there isn's a keyway for the sproket. How much would a timing chain, keyways of the crank and cam sprokets, and a front engine mount that bolts to the block cost?

@ResurwreckAutosUK

Жыл бұрын

Hi mate you are so right how did this engine win so many awards 👍👍

Hi Mark Who is going to spend £2k on a 10 year old car cam belt change? What a stupid design.

£1200-£1600 job. Is it worth it. ?? Puma speed sell a NEW ecoboost 1.0 for £2000

@ResurwreckAutosUK

Жыл бұрын

Hi mate it’s crazy this engine 👍👍

@stuwillis7710

Жыл бұрын

@@ResurwreckAutosUK But still is it easier to replace timing belt or engine ?? As an owner I mean

@stewartdcampbell

Жыл бұрын

​@@stuwillis7710 if you do the belt yourself it's not going to cost anything like £1200-£1600 and if you're getting someone else to do it you're still going to have to pay someone to fit the engine.

Now you know why they are called eco booms no one can afford to service them got to be the worst ford engine ever.

@ResurwreckAutosUK

Жыл бұрын

Hi mate yeah you are so right 👍👍

You spend far to much time talking.just get on with it.

@ResurwreckAutosUK

Жыл бұрын

🤣🤣I’m explaining to the new owner not you 😂👍👍