Back from my two week vacation, I begin to tackle the steering gear issues on the Ford 2000.
Жүктеу.....
Пікірлер: 30
@dehavenfamilyfarm6 ай бұрын
Looks like it was worth the time to take it all apart. Hopefully Spring will get here quickly!
@farmerpete
6 ай бұрын
Thanks Chris! Yes, I did find some things that need attention. If this winter goes anything like the last few have, it will warm up and melt in a week or two.
@Pennies_on_the_dollar6 ай бұрын
Man yeah Mr Pete, I wish you had done this video before I went through all that with Dads 😁😁 Looking fwd to seeing you go back together with it!! That looks like a winter wonderland!! Be safe and stay warm my friend!! 😁😁👍👍🇺🇸🇺🇸
@farmerpete
6 ай бұрын
Thanks Nelson!
@keithrobinson13316 ай бұрын
Great job Pete you are definitely a perfectionist. I like it ain’t much of us old guys like that left in the world.
@farmerpete
6 ай бұрын
Thanks! We'll just keep plugging away.
@kimculver10386 ай бұрын
Thanks for showing the breakdown. Now l know what to look at on my tear down
@farmerpete
6 ай бұрын
Thanks! I'll video more details when I put it together.
@brittblanton83426 ай бұрын
Thanks for the update Pete, I hope you and your better half had a good vacation. Take care and try to stay warm 👍
@farmerpete
6 ай бұрын
Thank you!
@donvoll25806 ай бұрын
Good day Pete Yea I was wondering why the late reply, remembering that u went on 2 wk vacation. Yes shaft looks pretty rough, We got it on Fri nite -Sat & then smaller one on Sunday Thanks for now
@farmerpete
6 ай бұрын
Thanks Don! Yes, we got the snow, now we got the cold!
@HumbleHaymakers6 ай бұрын
Looks good - that tractor will be a great addition to the fleet…👍
@farmerpete
6 ай бұрын
Thanks!
@GeigerFarm6 ай бұрын
Uhhh, winter is here in spades :(. I have got to get a heated shop. Hopefully parts are available.
@farmerpete
6 ай бұрын
Yup. Snow over the weekend, cold this week. Supposed to be above normal again next week, will probably all melt! The older you get the more you appreciate a warm place to work.
@kswaynes75696 ай бұрын
Hope you had a good time away with the Better Half. Nice job of troubleshooting.
@farmerpete
6 ай бұрын
Thanks!
@andymahaffa33966 ай бұрын
Thanks for the update bud
@farmerpete
6 ай бұрын
Thanks!
@redtractorsman6 ай бұрын
Mr. Pete this is going to be your going to town tractor.
@farmerpete
6 ай бұрын
Thanks! Hoping for it to be a bush hogging tractor.
@TruckFarmin6 ай бұрын
Just did a 3000 steering box. I found a pilot bearing puller worked great for that lower bearing.
@farmerpete
6 ай бұрын
Thanks!
@scottdaniels41716 ай бұрын
Don't remember that much snow back in June of 2020 😆
@farmerpete
6 ай бұрын
Ha! I set the correct time and date on my knock-off Go Pro once. It didn't stay, so to hell with it 🙂
@cesmith45666 ай бұрын
That up and down movement operates the steering valve, a little movement is necessary, but with the thrust bearing bad it's probably extensive! Good luck
@farmerpete
6 ай бұрын
Yes, it did seem excessive. Thank you!
@CliftonLehman6 ай бұрын
My brother and I went through my 3000 in 2021 never got new secter shafts but the steering shaft had the same problem with rust we bought a new one we used broken tractor for my parts if it's any help
@farmerpete
6 ай бұрын
Thanks! Broken Tractor is where I'm getting my parts.
Пікірлер: 30
Looks like it was worth the time to take it all apart. Hopefully Spring will get here quickly!
@farmerpete
6 ай бұрын
Thanks Chris! Yes, I did find some things that need attention. If this winter goes anything like the last few have, it will warm up and melt in a week or two.
Man yeah Mr Pete, I wish you had done this video before I went through all that with Dads 😁😁 Looking fwd to seeing you go back together with it!! That looks like a winter wonderland!! Be safe and stay warm my friend!! 😁😁👍👍🇺🇸🇺🇸
@farmerpete
6 ай бұрын
Thanks Nelson!
Great job Pete you are definitely a perfectionist. I like it ain’t much of us old guys like that left in the world.
@farmerpete
6 ай бұрын
Thanks! We'll just keep plugging away.
Thanks for showing the breakdown. Now l know what to look at on my tear down
@farmerpete
6 ай бұрын
Thanks! I'll video more details when I put it together.
Thanks for the update Pete, I hope you and your better half had a good vacation. Take care and try to stay warm 👍
@farmerpete
6 ай бұрын
Thank you!
Good day Pete Yea I was wondering why the late reply, remembering that u went on 2 wk vacation. Yes shaft looks pretty rough, We got it on Fri nite -Sat & then smaller one on Sunday Thanks for now
@farmerpete
6 ай бұрын
Thanks Don! Yes, we got the snow, now we got the cold!
Looks good - that tractor will be a great addition to the fleet…👍
@farmerpete
6 ай бұрын
Thanks!
Uhhh, winter is here in spades :(. I have got to get a heated shop. Hopefully parts are available.
@farmerpete
6 ай бұрын
Yup. Snow over the weekend, cold this week. Supposed to be above normal again next week, will probably all melt! The older you get the more you appreciate a warm place to work.
Hope you had a good time away with the Better Half. Nice job of troubleshooting.
@farmerpete
6 ай бұрын
Thanks!
Thanks for the update bud
@farmerpete
6 ай бұрын
Thanks!
Mr. Pete this is going to be your going to town tractor.
@farmerpete
6 ай бұрын
Thanks! Hoping for it to be a bush hogging tractor.
Just did a 3000 steering box. I found a pilot bearing puller worked great for that lower bearing.
@farmerpete
6 ай бұрын
Thanks!
Don't remember that much snow back in June of 2020 😆
@farmerpete
6 ай бұрын
Ha! I set the correct time and date on my knock-off Go Pro once. It didn't stay, so to hell with it 🙂
That up and down movement operates the steering valve, a little movement is necessary, but with the thrust bearing bad it's probably extensive! Good luck
@farmerpete
6 ай бұрын
Yes, it did seem excessive. Thank you!
My brother and I went through my 3000 in 2021 never got new secter shafts but the steering shaft had the same problem with rust we bought a new one we used broken tractor for my parts if it's any help
@farmerpete
6 ай бұрын
Thanks! Broken Tractor is where I'm getting my parts.