Focusrite Loopback Setup | How To Record Internal Audio
Музыка
In this tutorial, I will show you how to set up loopback in Focusrite Scarlet audio interfaces, and how to use the Focusrite Loopback function to record internal audio into your DAW. Loopback is a function found in Focusrite Scarlett audio interfaces. It allows you to easily set up the internal audio from your computer as a dedicated input, so that you can record this with just a few clicks inside FL Studio, Ableton, or any other DAW, without using any third-party software. This is extremely useful if you want to record audio from KZread, Spotify, etc into FL Studio, Ableton, or any other DAW.
In this tutorial, I'm using FL Studio to show you how to setup loopback with a focusrite scarlett 4i4, but it's the same basic procedure in other daws too.
The first thing you have to do is to go into Focusrite control and enable loopback output. Then, select the same input in FL Studio (or any other DAW). You can now record the internal audio. Easy!
Note that the Loopback feature is not available on the Scarlett solo and the older versions. This is only supported on the higher end 3rd gen interfaces, such as the 4i4.
----------------------------------------------
RECOMMENDED STUDIO GEAR:
(Amazon links below)
AUDIO INTERFACE:
☑️ Focusrite Scarlett Solo: geni.us/scarlettsolo-3rd-gen
☑️ Focusrite Scarlett 4i4 (3rd Gen): geni.us/scarlett-4i4
REFERENCE HEADPHONES:
☑️ AKG 612 PRO: geni.us/akg-k612pro
☑️ Beyerdynamic DT 990 PRO: geni.us/DT-990-pro
BUDGET MONITORS:
☑️ 5": Yamaha HS5: geni.us/Yamaha-HS5
☑️ 7": ADAM Audio: geni.us/Adam-Audio-T7V
☑️ 8": Yamaha HS8: geni.us/Yamaha-HS8
PROFESSIONAL MONITORS:
☑️ 7": ADAM Audio A7V: geni.us/ADAM-A7V
SUBWOOFER:
☑️ KRK 10S2 V2: geni.us/krk-10s2v2
MICROPHONE:
☑️ Audio-Technica Cardioid Condenser Studio XLR Microphone: geni.us/at2020microphone
☑️ Vocal recording booth/stand for microphone: geni.us/mic_shield_kit
XLR CABLES:
☑️ TISINO 35 ft Balanced XLR cable for mic: geni.us/xlr3ftoxlr3m
☑️ Monoprice 6 ft Balanced XLR Cable for monitors: geni.us/monoprice104761
SHORTCUT KEYBOARD:
☑️ Backlit FL Studio Shortcut Keyboard: geni.us/flstudio-keyboard
☑️Get The Complete Idiot's Guide To Music Theory Here:
geni.us/idiotsguidemusictheory
As an Amazon Associate, we earn from qualifying purchases.
----------------------------------------------
✔️ VST & Effect Plugins:
pluginboutique.com/?a_aid=5d4...
✔️ Premium Loops And Sample Packs:
www.loopmasters.com/?a_aid=5d...
----------------------------------------------
#firewalkmusic #Focusrite #loopback
❤️ Support this channel on Patreon:
/ firewalkmusic
❤️ Support us with a one-time PayPal donation:
www.paypal.me/firewalkmusic
🎹 Do you need professional feedback on your music? Or perhaps mastering? Check out my gigs on Fiverr: www.fiverr.com/firewalk
Follow FireWalk on social media:
/ djfirewalk
/ djfirewalk
/ firewalk_music
/ firewalk_music
📧 Business inquiries:
firewalk.official@gmail.com⅞
Пікірлер: 70
🎹 Do you need professional feedback on your music or perhaps mastering? Check out my gigs on Fiverr: www.fiverr.com/firewalk RECOMMENDED STUDIO GEAR: (Amazon links below) AUDIO INTERFACE: Focusrite Scarlett Solo: geni.us/scarlettsolo-3rd-gen Focusrite Scarlett 4i4 (3rd Gen): geni.us/scarlett-4i4 REFERENCE HEADPHONES: AKG 612 PRO: geni.us/akg-k612pro Beyerdynamic DT 990 PRO: geni.us/DT-990-pro REFERENCE MONITORS: 5": Yamaha HS5: geni.us/Yamaha-HS5 7": Adam Audio: geni.us/Adam-Audio-T7V 8": Yamaha HS8: geni.us/Yamaha-HS8 SUBWOOFER: KRK 10S2 V2: geni.us/krk-10s2v2 MICROPHONE: Audio-Technica Cardioid Condenser Studio XLR Microphone: geni.us/at2020microphone Vocal recording booth/stand for microphone: geni.us/microphonebooth XLR CABLES: TISINO 35 ft Balanced XLR cable for mic: geni.us/xlr3ftoxlr3m Monoprice 6 ft Balanced XLR Cable for monitors: geni.us/monoprice104761 SHORTCUT KEYBOARD: Backlit FL Studio Shortcut Keyboard: geni.us/flstudio-keyboard Get The Complete Idiot's Guide To Music Theory Here: geni.us/idiotsguidemusictheory As an Amazon Associate, we earn from qualifying purchases. ✔ VST & Effect Plugins: pluginboutique.com/?a_aid=5d496680b59cd ✔ Loops And Sample Packs: www.loopmasters.com/?a_aid=5d496680b59cd -------------------------------------------------------------------------------- ❤ Support this channel on Patreon: www.patreon.com/firewalkmusic ❤ Support us with a one-time PayPal donation: www.paypal.me/firewalkmusic
Not available with either 3rd Gen Solo or 2i2.
Wow! Glad I opened this video! Thanks dude, you always have good stuff!
No way that's really cool glad I got the foucsrite 100%
Good!
For anyone interested, this doesn't work with Focusrite 2i2s. They don't have the Loopback function!
How would you use lFocusrite loopback in OBS Studio instead of using a DAW
I went out and purchased the Focusrite 4i4, and returned the 2i2, after watching this video. It still does not look like this nor does it give me the option within my DAW to select loop. I would recommend making a new video with 4th gen as it is clearly different, but I'm sure the functionality is built in there somewhere. Thank you for your effort.
OK I finally worked this with Logic Pro. The ‘input’ in logic has to be channels 9 and 10 in the Logic track when using my Scarlett 18i20 3d gen I .had no sound to record until I did that. Thanks to this video I found the loopback in focusrite control by scrolling down …. Hidden from view!
Make sure the loop out isn’t muted 😂 I couldn’t get it to work then later that day I noticed it!
I remember the delta 10/10 had this function back in the early 2000s. how in the hell dont all interfaces have it by now standard 24 years later?...these companies play too much.
I remember it was fully possible to do this without using a "loopback" function, by plug in a spdif (or other channels) in a physical loop. I just dont remember how it worked again, which is annoying.
does it work with vst ihnstruments that you are not playing but it it just a sequence?
Note: seems to only work with 3rd gen interfaces
@MusicByVimal
9 ай бұрын
Yep. Only supported from 3rd gen onwards
I got the Scarlett Solo 3rd Generation and output function is not supported?
Can you do this on iPad iOS? How please?
pls does it work on 2i2?
Loopback inputs not showing up as a choice in my Ableton 11 DAW. Why?
How come 2i2 4th Gen doesn't have these options in Focusrite Control?
how to do in logic? i could not find the loop input only 1-2 input but no sound from there
@BarnardoP
4 ай бұрын
Try all the inputs on the Logic track. Forme it had to be 9-10 with Scarlett 18i20
MAKE SURE YOU DISCONNECT THE RECORDING TRACK FROM THE MASTER BEFORE YOU PLAY THE AUDIO IN BROWSER, OR YOU WILL GET FEEDBACK
@RTags77
Жыл бұрын
I knew someone in the comments would have the answer without me having to ask! Thank you very much!!!
@randowboosh6772
Жыл бұрын
@@RTags77 gotta protect those ears !!
@Matt-fh4bk
9 ай бұрын
Didn’t he show that in the tutorial
@cesaroliveira5094
Ай бұрын
This means turning off DAW monitoring on the Track being recorded.
Hi i use focusrite 2 gen....gow to set loopback please
@FireWalkMusic
5 ай бұрын
It is only available on the 3. Gen devices, unfortunately.
@ACOMPA
5 ай бұрын
@@FireWalkMusic exist loopback plugin? Or software?
Do you need the actual hardware for this? Or simply the software UI?
@FireWalkMusic
Жыл бұрын
You'll need hardware for this
@FireWalkMusic
Жыл бұрын
You can use some other third-party software to do the same thing though. :)
@Patrick-vv7cn
5 ай бұрын
Whiich one
Loopback isn't working in obs any ideas? I added capture audio and set it to the loopback but it's not showing any signal
@Ranoka
Ай бұрын
I got it working with OBS Classic by setting the Source for the Loopback to 'Analogue 1-2' instead of 'Playback (DAW) 1-2'. I can see the Analogue 1-2 as an option in OBS, but not the Playback 1-2 option. Hope that helps!
@MartotheMartian
Ай бұрын
@@Ranoka I rolled back to version 28 and it works with that one :) Thanks!
@Ranoka
Ай бұрын
@@MartotheMartian I also found that I needed to use the default Windows sound driver in my DAW to record audio rather than the ASIO driver. There might be a way to get it working with ASIO but I'm not sure.
@MartotheMartian
Ай бұрын
@@Ranoka ASIO works for me. I can't quite remember if that part was a pain or not since it was a while ago now. Thx 👍
Is this only with 3rd gen? Or is it something I'll have to update the Focusrite software for to access, because I don't have access to it.
@HelloDDD
Жыл бұрын
I have a 2gen and I was wondering the same thing
@HelloDDD
Жыл бұрын
@AmityHartstyle I tried to install it but then it says "No Hardware Connected". So yes, it's only for 3rd gen
@AmityHardstyle
Жыл бұрын
@@HelloDDD Thanks for the information! Have your 👑, king
@FireWalkMusic
Жыл бұрын
This is only supported on the newer 3rd Gen audio interfaces.
@MisterAlibee
Жыл бұрын
@@FireWalkMusic Thanks for the video, but, please update the description for this video. i tried so hard and realised it doesnt work for 2nd Gen. Could save some hustle.
does this work with the scarlet solo 4th gen?
@FireWalkMusic
9 ай бұрын
No, unfortunately not.
@zheppard413
9 ай бұрын
4th YES. 3th Nope
Hi brother, loopback feature is available also in 2i2?
@FireWalkMusic
11 ай бұрын
unfortunately it is not available in the base models, only 4i4 and up.
What's the app?
@FireWalkMusic
Жыл бұрын
Focusrite control
will this work in the 2i2?
@HelloDDD
Жыл бұрын
3rd gen only
@kreepteamofficial
Жыл бұрын
i got 3rd gen 2i2 and its not showing
@henryijeoma
Жыл бұрын
@@kreepteamofficial bro do you record vocals with your 2i2?
@henryijeoma
Жыл бұрын
@@HelloDDD doesn't work
@HelloDDD
Жыл бұрын
@@henryijeoma Ah well then not at all for the 2i2 at this point. I assumed that because it was the download option when I selected the third gen 2i2. I have a 2nd gen 2i2 and it doesn't work as well
NOWHERE does Focusrite Control say SOFTWARE input. It says HARDWARE INPUT! Which is screwing me up for HOURS!!!
Hello sir how are you. Love from Bangladesh.I am a student and i can't afford this DAW. If you can then give me a license of this🥺
"without using 3rd party software. First, open focusrite software"
@FireWalkMusic
Жыл бұрын
Well, if you have a Focusrite audio interface, I would argue that the software included with it is "native" to that audio interface. Besides, the settings only need to be changed once. After that, it's all done inside your DAW: :)
daw is third party software