Great tutorial! I updated my Eachine I6 to the 10 channel firmware with no problems. Thanks very much :)

Thank you Adam, it helps a lot for me, now I am using my flysky i6 upgraded withput any hazzle on my flight thank you

@RCwithAdam1

4 жыл бұрын

Thats great! 👍

just wanted to say thank you Adam. i know its a very old video, but you are saving me from buying a $400 spectrum radio! now i have a 10 channel radio that i can use for my flaps, aux lighting, and gyro settings awesome sir thank you for the tutorial! updated my fs-i6 successfully to the newer version/ beta for 10 channels. if i could add a tad of information to this group, if the flysky driver doesn't pop open right away, you may have to remove the usb cable, wait, then reinsert and re-open flysky driver. this worked for me after unsuccessful opening of program for update. thanks again, adam. good job!

@user-eq2ug7in7b

Жыл бұрын

Would a normal USB cable with the dongle to connect the flysky piece work you think? Or do you need the special data cable?

Thank you Adam,just upgraded my TGY- i6👏👍

thanks bro!!!! Got data cable worked like a charm...now with All these channels i feel like a boss B) !!!

Sou brasileiro, precisava de um vídeo atual sobre esse assunto e sua dica de site para o drive FTDI foi a melhor, foi o único que funcionou corretamente para fazer a leitura da porta e terminar a atualização.. Muito obrigado!!

One of the best firmware update tutorial I have seen. Because of this video, I may update my i6 even I don't have a need.

@RCwithAdam1

5 жыл бұрын

Glad you like it!

@kentlam9374

5 жыл бұрын

I get my cable and ready to do the upgrade. If I upgrade the firmware, will it erase all my profiles? Thx

@RCwithAdam1

5 жыл бұрын

@@kentlam9374 yes

@kentlam9374

5 жыл бұрын

@@RCwithAdam1 can I backup my default setting or profile for my falcon 250 pro as I don't know how to redo it

I like what you are doing with your channel. I almost want to get a flysky just to follow along even though I have a taranis😎

@RCwithAdam1

5 жыл бұрын

Thanks!

Excellent all up and running. Easy 👍

thank you very much for my knowledge I will try to upgrade my flysky

@RCwithAdam1

4 жыл бұрын

Glad I could help!

Worked! Nice and easy. Thank you

This was very informative 👏 I think you did a good job. 👍

Worked like a charm, thanks!

@RCwithAdam1

4 жыл бұрын

Great to hear!

Nice! Thanks for the info!

Followed it to a t. At the end of the flash, no power on my transmitter. I saw in the comments below this occurred to someone else too. More studying as to why. Turns out it was the baud rate setting in the com port. Set it to 115500. Reflashed even though no power was showing and heard the beep and all is well. Thanks that took less time than expected ;-)

Adam , thank you it worked .

@RCwithAdam1

4 жыл бұрын

👌😁

That was easy, thanks for the walk through.

@RCwithAdam1

10 ай бұрын

You bet!

Thank you - waited til winter to do the update - great instructions - performed as yours did - no issues - I subscribed to thank you for the great work - does the cable have any value after the upgrade?

@000djw000

4 жыл бұрын

You can use the cable with things like DRL and FPV drive games on a computer.

Hi Adam! I am not sure if you'd even read this comment, but if you do, I want to let you know that your videos are really helpful. The way you explain stuff is really cool. Your way of presenting is actually reassuring, and it was only after watching your video that I had the confidence to update my FS-i6. Really thanks for your help!

@RCwithAdam1

3 жыл бұрын

Hi, Kritik! I'm so glad my videos have helped you! I really appreciate you taking the time to let me know! Thanks! 👌🤗

Thank you brother ....!! It works.....

@RCwithAdam1

4 жыл бұрын

Huzzah! 😁

Hey great video! Just a few notes about my experience. Windows 10 auto-downloaded the drivers for me (yay!). So installing drivers were unnecessary. The program did NOT run the first time. this is because it needed to do COM registration more than likely. In order to do the registration it needs to run as administrator (right click the executable... run as administrator...). After the first time running as administrator it no longer needs it and can run normally (like i said only for the initial COM registration probably). The COM port would not let me open the first time. This is because the auto downloaded windows 10 driver set the baud rate to 9600, but the baud communication needs to be at 115k. This full combination finally got me up and running.

@theoztreecrasher2647

4 жыл бұрын

Thanks for the useful extra info!

@PatchBOTS

4 жыл бұрын

How did you change the baud rate?

@spoonsky

4 жыл бұрын

PatchBOTS Go to the Device manager, find the usb com port you want to change, click on it to open the properties page, click on the port settings tab and there you are.

@michael1473

3 жыл бұрын

hey thanks very much for your help. But I did everything you said ( I was getting so excited when I changed the baud rate to 115 lol ) but it didn't work. My com port wont open. Any ideas??

@spoonsky

3 жыл бұрын

@@michael1473 unfortunately that's all i did. Program is running (check), baud rate to 115K (check). Is the cable fully inserted into the flysky? It's a pretty stiff connection. Is the flysky in firmware update mode?

Thanks. Piece of cake!

Thanks dude Ur the best

Hi Adam, i successfully upgraded the firmware to the 10ch firmware in your video. Thank you for all the infos 👍My question is, if I bind to the 10ch fs-ia10b receiver and enable PPM output, will it have at least 8ch on the PPM output?

I use a Mac. So far I haven't found much that won't work on a Mac. I'm going to be testing this today. I'll update my notes to include any steps that may not be intuitive. Thank you for the videos, you have a great channel. Ok, update: I took a few minutes and went through the process. I'm finding using a Mac for anything quadcopter related can be challenging. Everything, including the site for the upgrade is al optimized for Windows. However, following your instructions I was able to update the setup and see the 10 channels. Seems if didn't need the firmware update. Well, yet..... Where I am stuck is connecting a Tarot retractable landing gear to the FS-i6X Switch D. I'm able to wire them through the receiver and get them to work with the A and B knobs, but not with the switch. I'm thinking it is related to mapping the switches, but I'm not sure. Any advice would really be helpful. I would love to see a full setup video on how to connect the Tarot landing gear to the FS-iA6B receiver using the FS-i6X controller. My design is to used 2 independent head-tracking cameras (One 4k and one 2MP Night Vision). So, I could leave the landing gear on one of the knobs and be ok, but I'd really like to know the proper way to set this up. I'll also setting it up with 2 batteries and an additional Solar charging unit on the quad to provide a substantially longer flight time, at least that's the plan. Not sure if the second battery will be necessary. I do enjoy your presentation. You have a great way of explaining so that it actually makes sense.

Great video as always. Quick question. Does this mod give you timers too?

@RCwithAdam1

5 жыл бұрын

I think it is supposed to, but I have not found or figured out how to access it.

Well Done ! You got a New Subscribers ! Now all my switches will work on my FlySky FS-i6 . But how do I get that to my plane or Quad ? My FS-IA6B Receiver is only 6 channels . Do I Have to buy the new 10 Channel one , and then it will all work ? Cheers !

Hi! Thanks for the tutorial! Can you make a video showing how to use those extra channels using fsia6b receiver?

@dileshwarrao2436

3 жыл бұрын

its really simple u need to select the type of switch and turn it off or on. after that u can add servos or anytype of things, basically there are 10 channels in that 4 channels are for joysticks, another 3 for basic on/off switch one for 3 control switch and last two are for adjustable type switches. what this adjustable type switches do is adjust to the specific level of their position like example servos. for 360 degree servos 3 way switch can be used to rotate in clockwise and anticlockwise direction. i hope u understood what i meant

Just upgraded - still works in 2023!

@RCwithAdam1

Жыл бұрын

Thanks for the update!

What are some recommended receivers so as to use all 10-channels ?

nice thank you i did not get a update cable with my transmitter :( and do you keep your settings after the update ?

@Saffron_SV

4 ай бұрын

Same but I'm not sure that we really don't get it or the shop owner just took it.

Thank you for sharing this it is very helpfull! But But for those who don't yet have the transmitter, just buy the FS i6 X instead. It already has 10 channel and it's 13$ more.

@RCwithAdam1

3 жыл бұрын

Totally agree. 👍

Hi loved this article about the up grade, i noticed that fly sky have a firmware upgrade on their web site for the i6 do you think that this is the official version if the upgrade Mike

@RCwithAdam1

4 жыл бұрын

Hi! I'm not sure about that.

Hi Adam, Hope you are doing great! I was able to follow the steps and my i6 got updated to 10ch which is really amazing. Thanks a lot for the information. I had one query though, is there a way to get SBUS mode in i6? I think in i6x you can select that from the setup menu. In i6, i can use PPM and IBUS but not SBUS.

@RCwithAdam1

3 жыл бұрын

Hi Pranav! I am doing great! Strange. Does the SBUS option show up in the menu at all?

@pranavasthanaDelhi

3 жыл бұрын

@@RCwithAdam1 Thanks a ton for your reply! No, i dont get that option. So, if i navigate to System->rx setup I get the below options: AFHDS 2A PPM OUTPUT RX BATTERY...etc if i go inside PPM Output, i can only switch it on or off. Am i looking at the right place?

Hey! I updated it! Well I’m getting 10 channels shown in my TX’s display and I ordered a 10ch receiver for it… it’ll work, right? I’m a bit skeptical tbh… I needed 7 channels for my mustang (maybe 8 if I add flaps) and couldn’t do it all on my 6ch receiver… hopefully this works aha…

Hi Adam; I was nearly tearing out hair because the Pololu driver had me on port 33 so invalid port for the firmware. Easy fix was relax and go into device manager and change the port number to a single digit, reset computer, run the program and bingo. Must agree that an extra 10 bucks for the i6x does make it simple. Hoping others see this post.

@ratmedscichacz

2 жыл бұрын

Hi, would you mind to explain me where is this SINGLE DIGIT to change ? I dont understand it well. Thx for help

@stephenwood4053

2 жыл бұрын

@@ratmedscichacz Will try. I use Win 7. After downloading the Pololu, I found that the data transfer lead from transmitter to computer was set as com 33 and no way could I type that into the little box top left to select port when in the program thing in the firmware update on 10 ch_i6_ programmer. Looked up on web how to re assign com ports. Found that ya can rename in Device manager (I think), the number of the com port you wish to give to that device. It took me ages to figure that out. I guess Ya need a proper data cable and find it in your device manager, select it and see.

@stephenwood4053

2 жыл бұрын

Oh forgot ya have to have the data cable as com port 1 to 9 , if ya try the number 10 it is a two digit number and the firmware will keep telling you Invalid port . I used number 7

you can choose betwen ibus and sbus like in the fsi6x???

It worked great...thanks. 🍺🍺 BUT all my models and setting were wiped off the radio. I had to rebind 7 quads and a bunch had heat shrunk wrapped receivers that needed removal to rebind. 😭😭😭🤦‍♂️ But still worth the trouble. Maybe there is a way to save the settings but it wiped mine.

do you know how to upgrade the firmware which will fix the bugs in the software? but also keep the 10 channel capability? or is it either / or .... in other words, get the 10 channel capability but live with the bugs that cause latency in the radio transmission signals

I see your videos on the fs-i6 transmitter but have a question which has not been covered. My planes work great with this radio, of course using the flysky receiver only, but when I set up my hirobo shuttle zx, I get all controls to work correctly except one. I can mix my throttle with collective using the "throttle" stick but when I idle up, instead of the throttle idling up only, the collective also ramps up, which is not desired for obvious reasons. Can I omit the collective on the idle up switch yet keep collective control on the throttle stick? It does work with my Futaba 8 channel and my Hitech 7 when I had that radio.

will this allow you to use s-bus like the i6x?

VERY HELPFUL ADA .GREAT JOB AS ALWAYS .BY CHANCE DO YOU KNOW WHERE I CAN GET AN UPDATE THAT IS SAFE FOR THE FS I6X .IT SEEMS EVEN THE OFFICIAL FLYSKY WEBSITE HAS A VIRUS OR SOMETHING WITHIN THE UPDATE THAT WILL NOT ALLOW TO DOWNLOAD AND INSTALL .YOU SHOULD SHOOT SOME MORE OF YOUR FLYING VIDZ ALSO.KEEP UP THE GREAT VIDS AND HAPPY FLYING.

interesting.. I got the 6x and looking at what version is on there it's 2019 firmware but I only have aux switches 5 and 6 available to program.. I wonder why it doesn't have all 10 channels.. should I do this to it and see what happens..i don't really need them all but still

Nice explanation. Will my settings be deleted if I flash this firmware?

@RCwithAdam1

3 жыл бұрын

Yes it will

Thanks! worked like a charm! but one thing - the program didn't start on windows 10 until run as an administrator

@ayhannkaraca

3 жыл бұрын

hi, What was the firmware version in the transmitter before updating? mine is 2.0 now 1-Feb-2018. and i can't update it. Whatever I did I could not connect to the computer.

@lukfu4384

3 жыл бұрын

@@ayhannkaraca I think I had the same version. I would check cable Driver and make sure the port number is correct in your case

does it have to be the data cable? mine didnt come with one i only have the flight sim cable and it doesnt seem to be working for me, it shows up as ppm not silicon labs whatever

When i look at device manager under bluetooth and other devices (my tx is listed here) it says KMODEL simulator phoenix rc controler, do i need a diffrent cable?

@Devviiiii

3 жыл бұрын

ja, looks like you got the simulator/gaming cabel and not the programming cable.....

hi. once the update to 10ch is done, can i still use my 6channel receiver (like the iA6)? or do i need the 10ch receive (iA10)?

Thanks for the info have windows 10 and the driver shows up as PPM shows a picture of a remote any ideas

@alexresech6253

4 жыл бұрын

@peachyfizz had to order a data cable then it worked just fine

I did the same but facing channel 1 stick problem,did stick calibration in transmitter nothing changes, please help.

with the supplied update cable, the fs i6 x does not need the dongle.update is quick and easy, but no channels are added after the update.

Can i use it in my phone s20 plus? Thanks

Thanks 👍 Worked on my i6 now have all 10 channels Would the same update work on the fs-t6 controller to open to 10 channels ?? If you doing video cant wait

@rctechmods8165

4 жыл бұрын

But what's about the receiver do I need to buy 10 channel receiver after upgrading transmitter or old one will work

@allanrc1121

4 жыл бұрын

@@rctechmods8165 Need a 10 channel receiver so get all 10 channels to work

@RCwithAdam1

4 жыл бұрын

Hi! Receivers with fewer than 10 channels with absolutely still work with the upgraded transmitter. BUT if you wanted to use 10 servo ports for an airplane, you would need a 10 channel receiver.

anyone know what those combo aux channel are for that he was talking about? also, has FLYSKY updated the firmware to include FLAPS settings, there is no FLAPS settings and it's extremely disappointing. All Specktrum radios have it and probably Futaba, but why not FLYSKY, this is a good unit and i just can't figured out why they don't do a small bit of programming and fix it for FLAPS???

I made this software update. But the PPM at the port on the backside of the radio still provides just 6 channels. Is there a way to get a 10 channel PPM signal?

Hi! Great video. I have a qustion and you may can help me...I hope... I have the exact same FS-i6 BUT it came in chinese language... Last version says "2.0 19-jun-2019".. How can i change to english lenguage?????

Adam, I loved your tutorial! However, after the update was complete and I got the 10 channels, I noticed I lost all the previous setup I had for my drone, including the binding with the receiver. I have the Arris X 220, which came ready-to-fly. I checked several binding procedures on youtube, but they all seem to use a different receiver (FS-IA6B), which they show not yet installed on the drone, plus some sort of plug and a different battery. I feel lost because I'm brand new at this. I've removed the top part of the frame and can get to the components, but I just don't know what's what, what I need to do, and what supplies/accessories are necessary to re-bind . I'd appreciate any help you can provide.

@RCwithAdam1

4 жыл бұрын

Hi, Cesar! I understand your "lost" feeling! And sorry about not warning about losing previous model profiles. The best thing would be to send me a few good, close up pictures of the quadcopter so I can see what kind of receiver it is and sort of how it's connected. My email is RCwithAdam @ gmail dot com. What you will likely have to do is re-bind and change a few settings on your transmitter to get it back to how it was. I can probably walk you through it. 😀

@manishpoudel4540

4 жыл бұрын

@@RCwithAdam1 can we delete and again bring back the previous version? can we delete the update we did?

i have prob to connection the usb ...im using window 8...not appear the usb port com...can teach me how to make it

How can i do this on a TX that doesn't have an lcd? I have a fly-bird st-i8 (8 channel). When i opened it up, it's definitely using flysky boards so this should work. But i dont know how to go to firmware update since the TX does not have an lcd, updated doesnt show current firmware and says device not found when clicking program.

I just tried to update mine and now the transmitter will not turn on. I am wondering if i turned it off before it did its' thing. :((((((((((((

Hi Adam been watching your videos and just got my flysky data cable today do I loose all my models that I’ve put in ie Vosper mtb and Dragonforce 65 will it set the remote as if you’ve just got it out of box and heard a few people have lost channels is this worth doing as I need the extra aux channels to run lights on Vosper but heard the aux channels won’t work till I upgrade is this correct many thanks chris from Cumbria

@RCwithAdam1

3 жыл бұрын

Hi, Chris. Yes, it will reset ALL settings and ERASE all model profiles.

@Audiwez

3 жыл бұрын

Thanks Adam after searching for the drivers for the data cable and a bit of messing on computer all complete and no problems on my end now have 10 channels thanks for your video on how to download everything as I would of been lost

Adam great videos. I have the i6x and updated for ware and now I'm getting an err. 1.10 on bottom of transmitter and can't connect to receiver.tried flashing previous version and it says can't downgrade. Any ideas?

@RCwithAdam1

3 жыл бұрын

Dang that sucks. I have not gotten that error before. Maybe try flashing to the new firmware again?

How do mixers work?

Could I flash the fsi6x forward instead

What to do if the Firmware version does't show up and it says Device not connected? Yes, I run it as Admin, I use the right COM port and right Baud Rate. The usb-uart adapter (which the cable actually is ) starts to blink but it still says device not connected. Whay should I do?

@jahedabagum3342

Жыл бұрын

Hey i have the same problem if you found a solution please tell me

hi adam, I have just recently purchased the fs-i6x but the default is only 6 channel, is this mod applicable my transmitter? thanks for your help in advance

My computer running Windows 10 recognizes my FS i6 controller as a game pad controller. When I look at the properties in the device tab I can't find a port number. I tried all the ports and it doesn't work.

@Nothereforthechase

3 жыл бұрын

dude wtf same.. it shows a controller icon too. Please inform if you've solved it

mine says driver error even though I have all the correct drivers.

How do I get this to work for ibus

Hey, is there any way to connect that controller to FVP simulator on PC?

@anmoldeepsingh9281

4 жыл бұрын

buy a simulator cable from banggood. It is cheap 10-20 dollars. Beware that simulator and data line cables are different.

My radio died on me after doing this, it doesn't boot up any more after the firmware upgrade. Any idea to revive it would be very welcome. edit: i did the udate again on the presumed dead radio. turned it on (nothing hapaned) but i could connect to the com port in the upgrade program. redid the program thing it bleeped (wich it dind't the first time) and came back alive. after closing the port in the program and disconnecting i restarted the radio saw it was updated.

@RCwithAdam1

4 жыл бұрын

Good! Glad it worked out okay!

Hello I just downloaded the software and it is installed but when I go to aux channels say 7-10 says none. I change it and when I back out and go back in says none.

Bro I had small doubt regarding this cable can be used as simulator with laptop. I had a problems in connecting with it.

@Devviiiii

3 жыл бұрын

There are 2 types of Cables, one just for updates/programming of the control and the other cable is for simulating an reciever on pc side, for gaming with this controller...

Recently bought I6 but when im try to upgrade to 10ch its not working, btw the package i bought didnt come with usb cable so i using the SM100 cable instead, is it the reason it's not working?

@damienlim8082

2 жыл бұрын

Yes. And I got to found out that there's another type of cable for upgrade use. Mf. Wasted tons of my time

Do you have to rebind it to the receiver after the update? I lost my binding plug years ago :/

@kaamilverma1602

4 жыл бұрын

u dont need a bind plug... the plug just shorts the 5v and the gnd ont the last port (the channel aftr the 6th channel) so just taack a f-to-f jumper and short the last channel thingy and ur good to go

@peterzingler6221

4 жыл бұрын

@@kaamilverma1602 oh boy no it shorts the vcc pin

Hello, my Windows can't show the usb connected with the controller. What to do? Can you suggest.?

Hey Adam. My controller won’t update to version 68. Any ideas?

I just downloaded the file to upgrade the firmware but it cant be open.Please tell me the solution.

hello, i do it like u... but i dont see the device silicon labs. I have installed it x64 but he just show me under devices: "FS-i6x Firmware update" and i cant see any COM#. I can just see COM# in the MOD i6 Programmer. So witch COM# i should take from COM 1 - 8 ?

@michael_berteotti

3 жыл бұрын

Hi, I have the same problem

@jayjayedo

3 жыл бұрын

@@michael_berteotti I know now why... U need a special firmware cable... The cable that's already in the box is not a firmware cable...

I literally asked that 2 weeks ago!(hope you didn't make it only for me ahah). I just have 2 questions: where did you find the data cable? i bought the fsi6 new just 3 weeks ago and there wasn't. If i go to system>factory reset after having done the upgrade and actually reset it, will it return to the normal fsi6 or what? thanks veeery much

@RCwithAdam1

5 жыл бұрын

lol just for you! ;D Here is a link to the data cable on amazon amzn.to/2W7LUxz .(Note: I'm not totally sure if the flysky SM100 simulator cable can also be used as a data cable for the firmware, otherwise I would say to just get the simulator cable so you won't have to buy 2 cables.). I tried the factory reset, and all it did was return all the settings I changed to default, but the firmware did not change. If you want to change the firmware, you need to download a different version from somewhere and change it just like in this video.

@johnnickerson9037

5 жыл бұрын

Mine will not got back to factory settings after flash. Also you can use a Ardinio to do the fash if you have one. There are videos on ytube how. This firware has been available for a long time. Look how to flash firmware for FlySky i6 10 channel mod

@eugenio6304

5 жыл бұрын

@@RCwithAdam1 okk thankss

@eugenio6304

5 жыл бұрын

@@johnnickerson9037 thanks for the advice! Unfortunately I don't have arduino...

Hi i have fallow this step which its all great but for some reason my pc cant identify my transmitter???

@vinnyp8574

3 жыл бұрын

My transmitter is flysky fsi6x

Question? I have an i6x, it still could use firmware update to get timer/ alarm etc... I am wondering if you do firmware update will you lose all the saved aircraft and settings that you programmed in?

@RCwithAdam1

4 жыл бұрын

Yes, you will lose everything. Honestly, I haven't figured out how to access the timer/alarm feature.

@johnnylightning5242

4 жыл бұрын

Thank you if you do please let me know. Maybe it’s already on there in the i6x model but I can’t find it either. I guess a stop watch on phone is just as good! Lol

The combined switch settings Tell it like the 3pos and a 2pos switch are have 6different states.so they work like a Single 6pos switch. I use it if my resiver dosnt Support 10 Channel, so i can use more switches than Channel But its a little complicatet to Set it up in betaflight whith the sliders. (swA+ swB on one Channel, swC and swD on the other,means that only 2 aux Channels are used. And 4 Channels are always used for the sticks. Thats 2switches more than whith the original Firmware. Normaly i use a ibus resiver so i can use all Channels. (sorry for my englisch, im german) Also there are 2 similar looking usb Adapters. One is only a Simulatorcable, and the other one is for Programming. I upgradet my Firmware whith an arduino that i had laying around, becourse i only had a Simulatorcable and didnt want to buy only for one time use a extra cable.

Hi Adam, I have upgraded to 10 Channels my FS-i6 transmitter. but I'm unable to see the sBus in the menu as FS-i6x. any idea please?

i really dont understand it.. I have installed drivers but still not showing name with COM in devices, but some PPM. Help me, I am stuck! :D

Does this upgrade disturb or corrupt any other function of the radio like elevon mixing, model number, or other?

@RCwithAdam1

5 жыл бұрын

I haven't noticed anything like that.

@RCwithAdam If I install the update, will it erase my beta flight settings an drones I already have loaded on my Flysky radio?

@RCwithAdam1

5 жыл бұрын

Hi! No. The Betaflight settings are stored on your quadcopter's flight controller board. BUT I would expect that if you update, any model profiles you've previously set up in your transmitter will be erased.

@brownbomer679

5 жыл бұрын

@@RCwithAdam1 Oh! So the reason I am asking is I had a guy mod a "phone drone" to run off my Flysky radio. I just wanted to make sure that if I update my radio it wont erase my drone in my radio. If that makes any sense.

@RCwithAdam1

5 жыл бұрын

@@brownbomer679 I think you'll have to bind it again.

@brownbomer679

5 жыл бұрын

@@RCwithAdam1 Thank you.

@brownbomer679

5 жыл бұрын

I think I just learned like 3 or 4 things from you today! Thanks bro!

Hello there, I have this same RC, by mistake, I press model reset in the menu for "Model 01" now the RC is not communicating with the drone they are bounded(transmitter and receiver) but no channels are working, I tried a factory reset but nothing changed. Do you know if I follow this procedure will re-write the models getting it back to normal?

@RCwithAdam1

2 жыл бұрын

Hi, Harold! Which drone do you have? No, this firmware upgrade won't help you get your settings back. Check out my video about possible reasons why the transmitter won't show up in betaflight kzread.info/dash/bejne/gJqlxqxyadLJfLQ.html . That might help. 🙂

@kickfliph

2 жыл бұрын

@@RCwithAdam1 Thanks, Adam!! the SBUS communication was off in the RC that fix the problem. Now I'm facing another issue, channel 5 is the switch with 3 positions now is jumping from fight mode 1 to 3 and then to 6, it was working before jumping correctly y sequence 1,2,3 and the for channel switch 6 (2 positions) will do the rest 4,5 and 6 going it reverse using channel 5 switch. Do you know how I can fix this? Thanks again for all your help I really appreciate it.

@kickfliph

2 жыл бұрын

Hey Adam, I found it now it's working. if it's OK with you I can share the link here.

Anyone had an issue that shows the USB to UART bridge but instead of a com port number it says driver unavailable?

Hi, I came across this video from a facebook group. I needed your help. I am new to this hobby. I have a flysky fs-i6 controller with me. When I try to connect it with the PC, the red right on the USB Dongle part gets red once, then after some time it stops. I am stuck at this point. Please help me to move ahead of this issue and start simulating. I have updated the firmware according to this video.

@RCwithAdam1

4 жыл бұрын

Hi Vishal! Welcome to the best hobby in the world! To use the fs-i6 with a simulator, you need to connect it to the computer with the flysky FS-SM100 (i think thats the name) usb dongle thing. You can get it from amazon or banggood. (I know, it's silly that you have to buy a seperate cable). Let me know if this helps! Oh and which facebook group was it?

@vishalpoddar-360securities5

4 жыл бұрын

@@RCwithAdam1 thank you for your help. Can u please send me the link of the cable because I'm unable to find it on banggood. Also, the fb group name is : flysky/turnigy support group

@RCwithAdam1

4 жыл бұрын

@@vishalpoddar-360securities5 You're right, I can't find it either. Apparently they removed it. But here it is on Amazon amzn.to/2PiwnuF .

Hi, execuse me, but can I change my FS-i6s firmware to FS-i6x firmware. I have a FlySky FS-i6s transmitter, but I do not fly quadrocopters. I fly with sailplanes. Thanks!

@RCwithAdam1

3 жыл бұрын

I haven't tried yet, but I don't think it's possible since the i6S is a touchscreen and the i6X is not.

@goldenfish77

3 жыл бұрын

@@RCwithAdam1 Yes, I think that too, but it would be good if they had been changeable.

My friend is trying to follow this firmware update for his Flysky remote that is for his RC diesel truck. The drivers show up as PPM and a game controller icon. It won't show up correctly with the drivers shown. Please help.

@revo4613

3 жыл бұрын

That´s the same for me, no idea how to solve it

frustrating, none of this works. i downloaded the cp210x, that installed ok, the other polo thing wouldn't install, came with an error message saying device manager cant read it or something. downloaded the mod pack, after couple of restarts eventually got it to launch but it couldn't find my transmitter anyway. in the device menu is is listed as flysky transmitter in update mode but doesn't have a com channel. i tried every channel on the mod pack but none would connect

So I still will need a 10 channel receiver right? Or I could use some kind of modification for receiver

@RCwithAdam1

4 жыл бұрын

Hi! If you want to use ten servos (or similar devices) on a plane, then yes, you need to have a 10 channel receiver.

@projunkes

3 жыл бұрын

@@RCwithAdam1 I just tried this out with a TGY-IA6B (so 6 channels) receiver and an esp32. In PPM mode you get 8 channels, in I-Bus mode you get 10 channels.

My controller arrived in Chinese. Does anybody know how to change it to English?

@RCwithAdam1

5 жыл бұрын

Hi! You probably have to change the firmware.

Do the dials come with center point?

@RCwithAdam1

2 жыл бұрын

Unfortunately, no, there is no indent to mark Center.

I never could get it to work. Installed the drivers and the program software but never got it to show up in the devices. Tried it on windows 7 and 10 both. But works fine as a game controller for flight sims. Just wont show up in the devices and no c2102 shown at all

@RCwithAdam1

3 жыл бұрын

It's very strange--this process seems to be hit and miss. For some people it works perfectly. Sorry it's not working for you. 😕

I install the drivers, seems ok, but I cannot find them in settings even after a reboot.... what now ? any ideas? win10

@jonnathanhilliard5684

2 жыл бұрын

ok the install had worked, the trick was one of my usb ports did not have enough power or something... tried a different port and it was detected automatically and then the USB Bridge showed up in Devices. Thanks much for posting this video :)

but the problem is how to use those 4 channels from ia6b reciever

didnt work for me. cant upgrade because, it came with a newer version out of the box(april 2018). but stock only has 6CH... how to downgrade to the 10CH version?