Thanks for watching! If you're looking for a SFF build that's a little bit better performing, I got you covered! kzread.info/dash/bejne/hYGOtLKgiq7bk7w.html&t

@lilelote

3 жыл бұрын

Sup

@JezyYT

3 жыл бұрын

Everything about that video was brilliant!

@anasjdioui2425

3 жыл бұрын

Add another 8gb of ram to get a better experience

@Durbanite2010

3 жыл бұрын

Cool video! I've been toying with the idea of upgrading a SFF PC for gaming. Any particular reason you didn't upgrade the fans (other than to save money)? There's only 2 in most of those SFFs (CPU Cooler and 80mm fan at the front of the case). The stock case fan is often not awful, but the additional heat from the GTX1650 would likely not help its cause. We also all know the stock Intel CPU coolers aren't great and there are quite a few LP coolers that would fit this build for not a lot more money (probably like $70 if you went with Noctua fan and cooler).

@maker7901

3 жыл бұрын

hey man try doing this on this pc if you still have it around or someting silmer theirs a program from gary gibson and its called inspectre. if you disable inspectre and meldown and restart the pc you will get more performance out your cpu that way. because the inspectre updates are affecting performance on the older i5's and i7's plus xeons give it a shot im sure youll get a performance increase. www.grc.com/inspectre.htm

Awesome video (as always)! These OEM's have endless customizablility and will continue to dominate budget bang for buck gaming PCs. Love the modding builds and hope to see more!

@ZachsTechTurf

3 жыл бұрын

Agreed Ryan, thanks!

I like the new benchmarking style a lot! I think this is a bit more interesting for me. As a person who watches your videos for fun and usually not to buy the builds you showcase, this made the benchmarks much more interesting and fun.

@ZachsTechTurf

3 жыл бұрын

Glad to hear it! Thanks for the feedback.

I did a sleeper pc much like this! It’s an hp elite 8300 sff with an i7-3770 and the gtx 1650. I love watching others show love to these small form factor PCs and its very fun to watch!

I'm planning to do one of your prebuilt guides but I'm still raising the money. I love the guides and it saves a lot of money.

@ZachsTechTurf

3 жыл бұрын

Glad to hear it! Let me know how it goes.

i love how my dude is so honest

Looks good! Flipping PCs has definitely gotten a lot harder so it’s nice to get some tips. Thanks. Also the benchmarking looks great seeing your reactions to the frame dips.

@ZachsTechTurf

3 жыл бұрын

Glad to hear it, thanks for watching!

I appreciate this so much been struggling on flipping PC's for the first time and didn't know what was wrong this definitely will help!

@ZachsTechTurf

3 жыл бұрын

Let me know how it goes!

That's a sweet case re-design! I love these SFF gaming rigs. Great for the living room.

I really liked the benchmarking style this time......and anyways....love this channel....great quality and a lot underrated......hope your channel blows up soon

@ZachsTechTurf

3 жыл бұрын

Thanks for your support!

Wow this video is awesome its nice to see some modding with like smaller pc cases. Keep up the great work man!

@ZachsTechTurf

3 жыл бұрын

Will do! Glad you enjoyed it.

The way how you did the benchmarking was good. You included every major game too

@ZachsTechTurf

3 жыл бұрын

Thanks for the feedback, glad you liked it!

Honestly I can't wait I really hope I get mine soon because I'm so motivated to get my HP 600 my IT teacher wanted to help me get a better computer and I also wanted to upgrade it as well so guys wish me luck and thank you for this video man it's always nice seeing builds like this

"Hello, sir sir, sit down please!" ..Lol adorable

@ZachsTechTurf

3 жыл бұрын

I do my best to talk smack.

@internziko

3 жыл бұрын

@@ZachsTechTurf That's was the most polite smack talking I'd ever seen

@mistermaniac7042

3 жыл бұрын

@@ZachsTechTurf how did you get a 1650 with stock psu? My psu couldn't handle the 1650

@Graphics_Card

3 жыл бұрын

Would like but 69

@internziko

3 жыл бұрын

@@Graphics_Card giggity

Wow this is nice and clean! Love the modding on that side panel. Also love the white finish, definitely a great project for old office machines!

@ZachsTechTurf

3 жыл бұрын

Agreed, thanks Mets!

This is a great value! Love the customization

@ZachsTechTurf

3 жыл бұрын

Thanks Jake!

This man is underrated for real Keep rocking bro I love you

@ZachsTechTurf

3 жыл бұрын

Will do, thanks!

Involving here so the algorithm could recommend it to more people. Man this looks dope ✌️

"some people can drive cars fast others can drive cars fast in the rain -ZTT 2020 , jokes aside great video i really liked this one

@ZachsTechTurf

3 жыл бұрын

Lmfaooooo I forgot this was the golden quote of 2020. Thanks.

Wow what are the odds I was just gonna build one related to this and you proceed to post this. Amazing!

@mypfpiswhatourphonesees4294

3 жыл бұрын

same lmaoo haha but i transfered mine to a bigger case, makes it a lot easier

This is amazing, thank you so much I just bought my sister one of these and I was wondering how I was gonna upgrade it , you made my mind up thank you

All the clips from the stream made me wish i could have come! Looked like a blast

@ZachsTechTurf

3 жыл бұрын

This actually wasn't done on a stream, this was me by myself trying to be entertaining lol.

I liked the new benchmark style. I got the info and it was entertaining.

@ZachsTechTurf

3 жыл бұрын

Glad to hear it! Thanks for leaving feedback

This is the type of information I was looking for and it's much appreciated. I have this same HP 800 SFF PC but am thinking of using an 800 G1 800 TWR with an I7 4790 instead. The mods that you do on these machines are great and I will be using them on my builds, thanks for sharing you experience.

Great looking build. I'm working on a similar build right now. If you have time, coloring or shrouding the PSU and making a cover for the hard drive bays can make the build look a little cleaner. If not, you can just use a heat gun to remove the PSU's sticker and leave it at that if you don't want to paint it.

Great Mod Zach!! Seriously man looks so dope!!!

Hi Zach, keep up the good vids. Also, that darker green fan in that background PC though.

@ZachsTechTurf

3 жыл бұрын

It's not going anywhere :)

just got 4 of these same guys at work for free bc they were gonna end up in the landfill and going to be thrown away. Thank you so much for making documentation of upgrades, it helps a lot!

Nice build, side note on the mod, they make a U Channel molding that you can apply around the side panel cut out for protection and a more professional look.

@ZachsTechTurf

3 жыл бұрын

Yep, thanks for that! I will definitely do that on the next one.

I'm really late but I still appreciate all of your videos because they always make me happy

@ZachsTechTurf

3 жыл бұрын

No need to worry about being late, thanks for watching them!

I really like the green screen bench Marking, I like it way better than just showing game play and numbers. I really like that modded case, you did a hell of a job. I thought you almost cut yourself, during the cutting it was some kind of a glitch , maybe it was the speed of that part of the video. AWESOME video as always bro, loving these 2 videos per week too. Especially on Sundays something to watch.

@ZachsTechTurf

3 жыл бұрын

Glad to hear it Mr Clyburn, thanks!

@Joeker8171

3 жыл бұрын

@@ZachsTechTurf no problem bro. Also, I forgot to say on the FORKNUT you look so excited with those kills lol🤣🤣🤣I'm messing with you

The redesign is cool. I have one of the newer HP like this with a half-dead i7 7700. I wanted to sell it but after your video... I'll make my own gaming console like this

Whoa that came out great!

I dig it man! Looks good!

@ZachsTechTurf

3 жыл бұрын

Thank you!

Nice build, perfect for those who have a small desk or anything like that

@ZachsTechTurf

3 жыл бұрын

Agreed!

Awesome Video Keep Going youve enspired me and ive just rbrought the same one!

Really good video 👍

That thing looks pretty dope.

Hi zach's tech turf. This pc looks absolutely amazing! I think you forgot to put a link for the plexiglas :). Also: are there any other methodes to cut the metal side panel and the glass? Your special saw looks too expensive :O

Great video loved the benchmarking

@ZachsTechTurf

3 жыл бұрын

Glad to hea rit, thanks!

this video is so awesome and entertaining your so cool Zach!!!!

i acctaully love watching ur vids zach

@ZachsTechTurf

3 жыл бұрын

Glad to hear it, thanks!

Thank you so much Zach I want to get this

THIS HELPED ME ALOT THANKS

I so much deserve this content! Nice job!

Finally was able to see this. Been at the hospital all day yesterday getting my gallbladder removed. Great video!

@zec4367

3 жыл бұрын

Hope everything goes well

@zec4367

3 жыл бұрын

I just realised that was 7 months ago..

@mOddEdLiKeHeLL

3 жыл бұрын

@@zec4367 thanks man! Im doing good now. 😁

@zec4367

3 жыл бұрын

@@mOddEdLiKeHeLL glad to hear 👍

A other awsome video and i like the new way you test out games keep doing that way

@ZachsTechTurf

3 жыл бұрын

Thanks for the feedback!

the benchmarking is pretty dope

Man the case mods really came out nicely! Glad to see it done buddy!! Thanks.

@ZachsTechTurf

3 жыл бұрын

Glad to you like it Mike, thanks.

Top tier trash talk: "Not my restaurant or gas station bro." - Awesome build

@ZachsTechTurf

3 жыл бұрын

Lmao 1/10 for trash talk

Yes! A fully modded/upgraded pc for my budget! Thank you! 👍

@ZachsTechTurf

3 жыл бұрын

Hopefully this helped! Thanks for watching.

It was funny that while changing colors for the main pc it was also affecting the pc behind it. I have that same issue with my RGB in my different pc and the lights of the tv and so on LOL

@ZachsTechTurf

3 жыл бұрын

Lmao yep it can get a little annoying :)

I liked the new benchmark style

only a little bit of time left for my first pc build, very excited.

@ZachsTechTurf

3 жыл бұрын

What's gonna be in your first build?

@nathan.847

3 жыл бұрын

@@ZachsTechTurf r5 3600 a cooler master aio b450 tomahawk Max g.skill trident z 3600mhz 16gb 512 gb ssd with a 1 tb hdd coolermaster h500 case 2060 super gaming x good looking cable extensions and a 600w corsair semi modular psu.

My first pc actually got inspired by you... the first video I watched on Gaming PCs was you... thanks for still being helpful and budget friendly 😂😂

@ZachsTechTurf

3 жыл бұрын

That’s awesome to hear! What’s all in the build?

@benwhitford5703

3 жыл бұрын

It’s a very bad choice to be totally honest.. a ryzen 7 2700, a320 m-k mobo, a gtx 960 2 gb (sign 😐), and 8 gb 2666 speed ram in a very cheap case... cheers for being you 😂😂 I guess😂😂

That GTX 1650 now has a GDDR6 version that is 5% to 10% faster.

@dork5456

3 жыл бұрын

The GDDR6 version needs a higher power tolerance and an external plug which some OEMs don't come with. The GDDR5 card can be powered purely through the PCI, so that's likely why it was recommended.

@ZachsTechTurf

3 жыл бұрын

Not that's low profile as far as I'm awawre.

@nosirrahx

3 жыл бұрын

@@ZachsTechTurf It is. Look on Amazon for the one that specifically mentions it. ZT-T16520H-10L is the one I want, I like supporting ZOTAC because they tend to make cool stuff like this.

@nosirrahx

3 жыл бұрын

@@dork5456 ZT-T16520H-10L

@Channel-ho6of

Ай бұрын

Got 1 yesterday.

Killed it. Great job

@ZachsTechTurf

3 жыл бұрын

Thank you very much Tim!

I'm a bit late to the fun but thank you for the video, I'm buying the 600 G1 SFF today with a GTX 1650, I7-4790k and 32GB of RAM.

It looks dope 👍🏻

shout out from the philippines 🔥🔥🔥 awesome video 👌

@ZachsTechTurf

3 жыл бұрын

Thanks for watching!

5:54 those jordan sllipers fire

I got the prodesk version and I’m planning to upgrade the graphics card and Memory. I love this build and if I could would replicate it myself

dig the case mod, really tough to add very much to this case.

I like the new style of the benchmarking run

@ZachsTechTurf

3 жыл бұрын

Glad to hear it Evan!

thank you for that tip. my pc sff has now gt 1030 silent and imma mod the case. next gpu choice is 1650ti lp

damn a lot of people have been modding the heck out of these sff pc after i got mine lmao, very nice coincidence.

you could also go with the low profile yeston rx 550 4gb you can snag it for $80 new on ebay and it outperforms the 1030 by far.

My dad got one of these for 150 bucks (Canadian) and he's getting an upgrade so I heir-ed it 😎😁 Will upgrade with this video Thanks 👌

I absolutely love the idea, and the result is great when you look at it from a distance, but I have some advice for you and my fellow modders that want to try this out : - The case seems badly cut in some parts, don't use a dremel to cut long straight lines, the cuts won't be straight and won't be clean - Depending on the paint that is already applied to the case, sand the whole case with fine grain sandpaper before applying paint, the result will be neater - If you use a rattle can or an airbrush, apply at least two or three light coats instead of applying one massive coat in one pass, it will prevent the paint from dripping and stacking at random places. - You really should apply varnish (matte or gloss) on your paint job in order to prevent it from falling appart (as we can see on some parts of your case) Once again, the idea is great and I thank you a lot for the time you took to create and share this content

@ZachsTechTurf

3 жыл бұрын

Thanks for taking the time to write some feedback, but alternatives would have been more constructive! 1. What tool do you recommend cutting metal and acrylic for straight lines? 2. Is there anything that wasn't neat about the case? I agree that your idea is probably more META, but would there be a tangible difference when looking at it? 3. I did this exactly, I applied 5-6 small coats and not just 1 large one 4. What was falling apart? Thanks again

@Shadeblight

3 жыл бұрын

@@ZachsTechTurf thanks for your quick answer. First of all, I'm really sorry if I my advice might have appeared rude, I'm not speaking in my mother tongue. 1. Using a circular saw and a guideline or a table saw would greatly help. I know that most of the people dont have access to such tools, but hardware stores often offer cutting services. If really you have no access to such tools, you could also mount the window on the outter side of the panel and paint its border black to hide the places you fixed it on the panel (beware, the window has to match the size of the panel in this instance). 2 & 3. Some cases (most frequently older models) come with a "granulated" and "rough" paint job. Depending on the angles of your camera, I could see some elevations and irregularities and I assumed that they were caused by either those already existing irregularities or a single coat of paint which dripped a bit. That's why I think that sanding the parts that you want to paint is better. I forgot to mention in the advice that I gave for the coats that you'd have to let each coat dry before applying another one (but you must have done that 👌) 4. Mostly on the edges of the cut side panel, were the window meets the panel's metal frame, we can see "black" spots were there is not paint. I can't illustrate my words with pictures and I might have made a mistake, but after watching closely the bottom right of the window when you face the "window side" of the PC, I think I see spots of missing paint.

@rajakhan12346

3 жыл бұрын

@@Shadeblight your English is very good mate . Dw .

3:52 Haha colours were changing on his own build behind the desk lol

@ZachsTechTurf

3 жыл бұрын

Was hoping no one would notice haha.

I have the same PC set up, but when I upgraded the GPU, I couldnt find the GTX 1650 at the time, and went with the AMD Radeon RX 6400 instead which works well for the games I play. Many of the games I play run well in 1080P but instead of the I5, I've upgraded to the I7-6700.

love u brotha from Morocco

@ZachsTechTurf

3 жыл бұрын

Thanks for watching my videos!

You should leave the average fps some where in a corner on screen while your still showing the benchmarking runs, instead of taking it off completely!

That original HP horizontal PC is exactly the model that the school uses in the libraries and the classrooms. I might ask to keep ones that they don't need and do this?

5:13 rocking linus style with the sandals an socks ..... noice !

@ZachsTechTurf

3 жыл бұрын

Noooo there's a difference between what Linus does and wearing high Nike socks and Jordan slides.

Bought the exact same PC from a recycler a couple of years ago and put in more RAM and a SSD. Unfortunately it was during the great Graphics card drought of COVID and the only card I could get was a GT1030 - I could not find a 1650 anywhere and the ones being sold on ebay used were at ridiculous prices - so unfortunately no 1080p gaming for me - but I'm eventually going get a 10th gen i3 from work when they swap a desktop over - and this can become a media PC as it can handle 4K playback with no issue.

You should totally attempt a core 2 series gaming pc build

Sick🔥

@ZachsTechTurf

3 жыл бұрын

Thanks Zach ;)

I got mine with 1 Tb hdd and 32 gb ram pretty awesome

Went all out this time! Congrats, you earned my respect. :thunbpsup:

@ZachsTechTurf

3 жыл бұрын

Thanks for watching!

Nice build i recently bought a lga 775 hp compaq 8200 elite for an amazing £6 inclu free postage which i plan to flip i got it working after some troubleshooting and upgraded the CPU to the core 2 quad 8400 and some decent 8gb kit of ddr3 ramp plan to slot in a decent low profile gpu something like the amd Radeon pro wx 2100 shes good as new in the inside but still all beat up on the outside i plan to mod the case allbeit wont do as extensive modding as you did as i dont have access to a Dremel and resources to keep my self save plus i would like to apply the common programming practice of keeping it simple stupid although i do plan to vynill wrap the case and spray paint the front fascia maybe put some rgb at the front as well stuff which is easy todo and should make it look awesome

Yo Zach, I like the new format but if I can add, I believe the camera is maybe too big? I mean it occupies a lot of space on the screen, also, the microphone on the way just looks really odd. Besides that I would like to see it more often, actual live gameplay. Also you're recording so that obviously takes a few FPS but I think that the PC looks sick!

@ZachsTechTurf

3 жыл бұрын

Thanks for the suggestions! If you do wanna see me live though head here: twitch.tv/zachstechturf

gread vid, how about a HP Z240 tower into a gaming pc next, cheers

I tucking admire u u are so humble. Do u have a patreon. I love u for making vids u seem so friendly. I want to give u all the money in the world love ya

@ZachsTechTurf

3 жыл бұрын

I appreciate your viewership. The best way to help financially is over on Twitch, there's multiple ways to give including straight donations, subscriptions, gifted subs, bits, etc etc

i got that same hp pc and knowing it only costs $300 to upgrade it is gonna help me out alot

This will be my starter pc maybe

@ZachsTechTurf

3 жыл бұрын

Let me know how it goes!

I just transferred my HP Elitedesk 800 G1 to an old HP Pavilion case, added a gtx 1650 and I'm playing Forespoken right now. Extra things I had to do: 1.) Remove the power switch and lights from the front cover button, insert into the from cover of the Pavilion. 2.) To use my Elite desk cooling fan, I had to find some nuts that fit on the bolts in the fan too attach it to the mother board. The Elit desk mother does not have built in nuts. The fan bolts into the case. It ain't pretty but works like a champ.

Nice mod. Will try to replicate if I can get my hands on some.

Great upgrade! Do You hace any issue running the GPU? I've read (Optiplex) that the port only gets 50 watts while the GPU needs 75. I AM looking into building something similar buy i am concerned about this.

Great job. Looks like a more expensive build.

@ZachsTechTurf

3 жыл бұрын

Thanks!

When he killed that Player in CS:GO and said Thank you. 😅😂🤣 that did it for me lol

La voy hacer así gracias😂

I modded one of these and kept the cpu and ram and psu then added a gt 1030 and a 2tb ssd and turned out pretty clean :) (edit) i think it would look nice with light gray instead of white

And u modded the case that amazing 😍

@ZachsTechTurf

3 жыл бұрын

Thank you!

Nice video, but I gotta ask: How much should you charge if you're going to re-sell the modified PC ? Like how much should the profit be ?

Do you think putting 2TB HDD (with the 120GB SSD you included) , an i7 would be better? Maybe it might help with some cpu intensive games. Great Video as always :D

@ZachsTechTurf

3 жыл бұрын

An i7 processor could certainly helpt.

Yeah, nice cutting you have there, edges as smooth as silk Double kill on bots, an achievement to be proud of!

@ZachsTechTurf

3 жыл бұрын

Lmao I agree!

while he was changing the led colors you could see the pc in the back changing too

Those edges look rough. Wondering what good options there could be to cover those wonky cut lines. Maybe some PVC white trim could do the trick. But then again did not even realize that was the original case at the start.

@Zack Tech Turf. Love the idea of OEM upgrades and flips. However title says Flip a Gaming PC Like a Pro and you say how much you paid for it with the upgrade but never mention selling price. Thanks for the awesome vids btw.