Sometimes you need a little bit less, sometimes you need some more! (Angle, that is) Now, if you can pick out the 2 TV bits I picked those from, and you can hum the tunes, you win a prize!
Жүктеу.....
Пікірлер: 19
@rippermaggoo25348 ай бұрын
UT2 here! Love you videos! Would really enjoy seeing a video on probe angle selection and frequency selection for different scenarios in weld inspection!
@Ratpackapunch5 ай бұрын
I love your videos! Great practical information for all, Thanks Paul keep scrubbing!
@gustiandrean40428 ай бұрын
Can't wait for your new content Mr. Holloway 👍👍👍
@Ionbilly8 ай бұрын
Great video as always Paul.
@Steve_Jarrett-Jordan8 ай бұрын
I work for a major aerospace company that works primarily with composites. Mostly carbon fiber. Would you ever consider covering composites? Love your content!!!
@hollowayndtengineeringinc.5201
8 ай бұрын
You're the second person to mention it in a week. To be honest, I haven't really tried composites. My world is metals right now. But I'd give it a go if I had the chance
@Steve_Jarrett-Jordan
8 ай бұрын
@@hollowayndtengineeringinc.5201 that'd be dope. Thanks for the reply!
@SyrianAtheist
8 ай бұрын
@@hollowayndtengineeringinc.5201 🤘
@Astro_amador8 ай бұрын
Great!
@santiagocruz90608 ай бұрын
Great Paul, tanks for the very calre explanation
@TheResiDogs5205 ай бұрын
Great Info! Thanks for the video.
@Brighter-Shores2 ай бұрын
I wish you was my teacher / tech / company lvl 3 lol
@hollowayndtengineeringinc.5201
2 ай бұрын
That's nice of you to say, thanks! I am a Level 3 on retainer for a couple companies, but mostly here in Canada.
@user-ir5qx4xc5l4 ай бұрын
Great video! Can you also show how to UT flaw on aluminum welds? Thank you
@russellpickering24448 ай бұрын
Hi Paul great video However some of the draw backs of conventional UT with the 12mm + probe beam index can be over come by using close approach wedges and smaller diameter probes allowing steeper angles on smaller weld throats. As a technician who started in the 1970's with USM 2 & USK 6 much more importance was given to echo dynamic pattern trace. This seems to be a lost artform due to the poor traces on the initial crop of UT sets in the 1990's
@hollowayndtengineeringinc.5201
8 ай бұрын
I hear ya. I have some 1/4" transducers but the beam spread is so ugly the advantages of getting closer are a wash. It's all trig in the end though.
@ianhulland10648 ай бұрын
Hi i am from the UK any chance of doing something on part pen t- Butt seem to be coming across them more often best way of sizing the penetrant ie compression on the end of plate 6db drop or angle probe of plate?
@AriasFelipe3006 ай бұрын
Hello mister. Where can i get those plates with calibrated flaws ??
@hollowayndtengineeringinc.5201
6 ай бұрын
You can get those from Flawtech in the US, Flawspec in Canada, or Sonaspection in the UK
Пікірлер: 19
UT2 here! Love you videos! Would really enjoy seeing a video on probe angle selection and frequency selection for different scenarios in weld inspection!
I love your videos! Great practical information for all, Thanks Paul keep scrubbing!
Can't wait for your new content Mr. Holloway 👍👍👍
Great video as always Paul.
I work for a major aerospace company that works primarily with composites. Mostly carbon fiber. Would you ever consider covering composites? Love your content!!!
@hollowayndtengineeringinc.5201
8 ай бұрын
You're the second person to mention it in a week. To be honest, I haven't really tried composites. My world is metals right now. But I'd give it a go if I had the chance
@Steve_Jarrett-Jordan
8 ай бұрын
@@hollowayndtengineeringinc.5201 that'd be dope. Thanks for the reply!
@SyrianAtheist
8 ай бұрын
@@hollowayndtengineeringinc.5201 🤘
Great!
Great Paul, tanks for the very calre explanation
Great Info! Thanks for the video.
I wish you was my teacher / tech / company lvl 3 lol
@hollowayndtengineeringinc.5201
2 ай бұрын
That's nice of you to say, thanks! I am a Level 3 on retainer for a couple companies, but mostly here in Canada.
Great video! Can you also show how to UT flaw on aluminum welds? Thank you
Hi Paul great video However some of the draw backs of conventional UT with the 12mm + probe beam index can be over come by using close approach wedges and smaller diameter probes allowing steeper angles on smaller weld throats. As a technician who started in the 1970's with USM 2 & USK 6 much more importance was given to echo dynamic pattern trace. This seems to be a lost artform due to the poor traces on the initial crop of UT sets in the 1990's
@hollowayndtengineeringinc.5201
8 ай бұрын
I hear ya. I have some 1/4" transducers but the beam spread is so ugly the advantages of getting closer are a wash. It's all trig in the end though.
Hi i am from the UK any chance of doing something on part pen t- Butt seem to be coming across them more often best way of sizing the penetrant ie compression on the end of plate 6db drop or angle probe of plate?
Hello mister. Where can i get those plates with calibrated flaws ??
@hollowayndtengineeringinc.5201
6 ай бұрын
You can get those from Flawtech in the US, Flawspec in Canada, or Sonaspection in the UK