Wayne, that maxi valve is an early version MANDATED by California in the sixties. It was a separate dedicated air tank to be used when the truck broke down, or in any way disabled. It was only used to charge the maxis long enough to get it off the highway in emergency situations when truck couldnt air itself up. They were way ahead of all the other states in this regard. Bill

@natefredenberg1892

8 ай бұрын

I just put all new lines in a buddies truck that came from California and had this system on it, air from the emergency brake valve goes through a double check valve to supply air to the spring barakes

@billtodd6509

8 ай бұрын

I had just gotten out of USMC in 1966 and bought a 1965 IH Emeryville built with just braking system not mandated by Ca and the first trip I took to the west coast, they put me out of service in Banning and made me get that system put on my almost new tractor. E@@natefredenberg1892

@Ol2Stroker

8 ай бұрын

Ahhhhh gotcha

That raincap is mounted the correct way so many people face them the other way

That would make a great fifth wheel hauler, you’d only do a couple hundred miles and be ready to set up camp for the day.. perfect

Mack used 3 valve system on air brakes yellow to set both tractor and trailer park brakes, red trailer only and blue tractor only. I have a 1979 r600st mack and the blue valve you really don't need. But I hope that helps. There is also a anti puff valve on back of injection pump to prevent massive black smoke puff while shifting.

@Ol2Stroker

8 ай бұрын

Gotcha thanks

Hey ,check under the back of the cab ,we had one at work and I found the wet tank was back there hiding and full of scmooo😁😎

" It works enough to work" 🤣🤣🤣 good stuff Wayne.

That preview in the intro was cool, I like when videos have that

I love the stack cam footage...oh you have a headlight out...right side

I had the same Mack Model 700 in my profile picture except had a 8v71 Detroit 13 speed with Glasspack pipes great truck that rode like a tank!

How much they charging you for that, because as long as you don't have a clear coat on your wheels, other aluminum doodads. Go get yourself some condenser cleaner from AC supply house, and I promise you, that you won't have to mix it nearly as strong as napa's cleaner, and gallon will last years compared to that stuff. Just remember do not leave it on very long, and I mean minutes is too long. You get yourself a two gallon or one gallon pump sprayer like for weeds or bugs, mix it with warm water shake it up good. Then put it on the mist setting, spray it on your aluminum, and watch it turn from grungy to white before your eyes.. Then rinse it off after you've used a mop glove with a good rubber glove inside it to protect your skin. Then tell Neighbor Kid to bring the polishing equipment, because you're done with the hard work for him. It's seriously that easy, just remember rinse it off as soon as possible, wear good long rubber gloves like your wife does for cleaning the oven out, and then pour anything left over into a blech jug or something similar, and the rinse the sprayer out throughly, or it'll eat the seals out of your sprayer.

@wes11bravo

8 ай бұрын

Tim - that's really good advice, brother! I love how you figured out that one product made for a purpose entirely unrelated to the task at hand is not only less expensive than something off the shelf, but also more effective - how'd you do that? Something you just stumbled on? Anyway, thanks for the tutorial. Now if I only had anything that was worth shining up... haha

Friday night. I’m sick and tired of doing bodywork. Came home and stoked up the wood stove and a new 2stroker video pops up. Day complete.

Glad to see you giving the bulldog some fixing up Wayne. Awesome work

I like it when you fast forward the scrubbing part jay paydirt fast forwards some of his talking parts and it is hilarious sounds like a chipmunk talking

Looks Real Great, Hope To See It Again Before She Goes!

I love old big trucks from the past

Awesome video Wayne👍👍👍

Maybe some tires, paint on the frame and a straight pipe and she will be looking good. Nice work wayno

The Mack needs dual straight pipes.glad to see that you saved it

I like what you did with that little Mack, bloody awesome job Wayne.

looking good those old mack were always a nice looking truck when there cleaned up

Sharp little Mack, Wayne. The cleaning made a big difference. Thanks for the videos.

That is a nice looking old truck.

Great video Wayne really enjoyed your video on the Mack. It cleared up very nice. Painting the wheels looks good too. Nice pad infront of the shop Wayne 👌.

Steering wheel looks like it’s seven feet in diameter 3:25 😂

That Mack is a sweetheart! Cleaned up nice 👌🏻🤘🏻

Thanks for the show Wayne 🍻 🇦🇺

That's sick, what a sweet little truck. I remember as a kid, when we were truck-spotting, we weren't all that excited about Macks, Freightshakers, Astros, etc. They were pretty commonplace, we were fired up to see Petes, KWs, Western Stars, Marmons and the like. Now what I wouldn't do to find some of those old beauties that I took for granted back then!

You have been really killing it on these videos lately good job 👍🇺🇸

@vinyltouppereveiws4286

8 ай бұрын

Poo head

Looks much better with the cleanup. Someone who's into the classic Macks will buy it.

Hey Wayne, you should get some gloss white MRO paint and hit that aluminum frame. That truck would look pristine with a clean white frame. Use MRO though. That paint is awesome

Literally never get enough of the videos keep em coming working on junk! Excellent stuff!

Nice work.

@Ol2Stroker

7 ай бұрын

Thanks!

Hi Wayne nice mack I like the bulldog on the door and the hood

That is a cool old Mack Wayne.

That has come up choice Wayne 👌👍

Have a good weekend

Wayne your cabover is so cool❤❤❤

Just a note fellers do not use the aluminum brightner on coated or any kind of painted aluminum

@Ol2Stroker

8 ай бұрын

Correct!

I would time stamp the blue shop towel but forgot and also thanks for the shoutout man! I see most of this stuff live but still enjoy watching it.

@Ol2Stroker

8 ай бұрын

Man I sure appreciate all the help!

@RMTTR640

8 ай бұрын

Is scott the neighbor kid?

@Ol2Stroker

8 ай бұрын

@@RMTTR640 indeed!

A little cleanup and that old Mack looks like new! Well... it looks a whole lot better and I do mean a whole lot better.

You double clutchin weasel 👍

@DanEBoyd

8 ай бұрын

The girl on the billboard by the big old highway!

@minnesotatomcat

8 ай бұрын

@@DanEBoyd Wearing nothin but a smile and a towel 👍

@Ol2Stroker

8 ай бұрын

Hell I can't shift these goofy 4 strokes.

See a clean up video didn't hurt to bad ! Now clean up the grey Pete!

Power Tools even if the have rubber on them are great! LOve the Ole Mack.....LOve the vids... All the best to you and the bride....Be Safe...now jake something!

i sell the hell out of that aluminum brightener at work great stuff

Looks awesome Wayne ! You’re doing a great job this truck is solid and what you have done should help someone be inspired to buy her and continue the tidy up . Wish there was more like you to keep old gear working and not turned into scrap . Good on you . And Fantastic job on the concrete , your concrete trucks are way different from what we have here in New Zealand and Australia , the bowl and chute are the other way around - at the back . Your way works better but the truck is more of a custom built . We used regular trucks , Mack’s Sterling, Ford 6 wheeler or 8 wheeler twin steer . Cheers from New Zealand

@Ol2Stroker

8 ай бұрын

It's always so interesting to me to see the different style trucks other countries come up with. I appreciate the kudos on the mack it cleaned up well and I really think it'll make someone a nice truck

Good job giving the Mack a bath, plus using the aluminum brightener. I'd have painted those outside duals a red color, along with the frame rails. To me white looks wimpy . Truck is very similar to a local truck in Ravenna, Ohio, his has a 10 speed . It also came from Ca.

@Ol2Stroker

8 ай бұрын

I like the white it goes with the paint scheme. Looks clean I think. But more to the point .. it is wimpy its 4 cycle. 🤣🤣

Thanks Wayne

sweet truck

This truck is from a little after that era, but I love that Seafoam Green on them old trucks!!!

I love the truck

Truck looks good buddy hope you an family have. A great halloween love your videos wayne

Old Emeryvilles had the up pull to lock the door. As harvester pickup trucks did the same. Can`t lock yourself out with out the key.

greets from germany :)

man shes a beaute clark

Geeze, its a long way to the end of your drive. Perfect test road.

@Ol2Stroker

8 ай бұрын

👌👌

Me being in HVAC biz, kinda get a kick outta the furnace filter😆😆sweet truck.

@Ol2Stroker

Ай бұрын

Lol that's a real deal truck filter. Farrs are hard to find

That truck is a peach! Hope it winds up with an appreciative buyer.

@Ol2Stroker

8 ай бұрын

I hope so too

That truck needs air and fuel to run I think people need to save these while we can.new trucks are only a computer chip away from being unable to work I hope people think about that, good job guys

Sweet ole mack

like the old school green & white .... would call that seafoam ? would look good frame rails back to white

@Ol2Stroker

8 ай бұрын

Man I was just thinking that the other day too

Did you guys work at the Blue Beacon. Yall are very good on a wash job❤

@Ol2Stroker

8 ай бұрын

🤣🤣 no we didn't

Video only plays until You shut the passenger door. Right after the old guy was putting in rear window in. I'll try it again in the morning. Thanks for time You put in to making these videos.

😎💯✌NICE LITTLE TRUCK...

U officially made a cleaning video 😂😂😂😂😂

@Ol2Stroker

8 ай бұрын

I know it and I'm not happy about it either

I used to use "eagle 1"for aluminum...it worked a treat (just had to be careful- it would burn your hands). Problem was they discontinued it (the good stuff anyway). Anyways, my pop heard me bitching and moaning about not being able to get it anymore (he was a chemist for dupont for 30+ yrs). He said it was probably phosphoric acid. I got a gallon of generic phos. acid somewhere (I think maybe home dumpo) added some water to it and it worked great (and was wayyy cheaper) . So I dunno if you use enough of that napa stuff to where the price becomes an issue....but you can substitute some no-name phosphoric acid and get pretty much the same results. Just dont use any of that stuff on polished alum. cause it'll turn the aluminum white and foggy

Can't you use your Brockway for some reference for the mack?

Where was that mack from originally?

Is the concrete slab new? If so that is awesome

@Ol2Stroker

8 ай бұрын

Yes. Coming in a future video stay tuned 🤟

Cloverleaf (shamrock) used chevy white 😇

エアクリーナーがお馴染みのドナルドソソじゃなくてファーってのがヤヴァい☆ 国宝級の個体だぁね☆

👏👏👏

I was getting into the cat truck....

Wayne i thought you sold that mack?...did you decide to keep it after all?

Careful aluminum brighter is fairly bad if it gets in your eyes.

@Ol2Stroker

8 ай бұрын

Oh man that would suck!!

I'm no truck driver but I saw something unusual . Does the Mack have an unusual transmission that it has to be double clutched to shift instead of the normal way you drive any other of your truck . Just curious ... Ole boy installing the rear window must not know the string trick to install the glass into the seal ??? Install the seal and run greased nylon string into the seal . Push the glass against the seal and start pulling the string around the glass and the seal will lip over the glass .

@Ol2Stroker

8 ай бұрын

I just ain't used to it. Shifts totally different than my Detroits so I clutch it

👍🏻🍻

Those tanks are clean but they don’t shine. Take some Brillo soap pads with a trickle of water go slow and easy and they will shine like chrome

@Ol2Stroker

8 ай бұрын

Hmmmm I'll hafta try this

If you're not in Ephrata, you've got an identical twin!

@Ol2Stroker

8 ай бұрын

Nope not me!

@genefogarty5395

8 ай бұрын

@@Ol2Stroker I have to get a picture of this guy then, lol. They say we all have a twin.

You use the clutch to shift? What’s up with that?

@Ol2Stroker

8 ай бұрын

Only on this thing.

A j can say is f yeah -- where is the smoo???

RACE TRUCK!

You’re gona throw out that ankle bearing again if you keep wrestling them heavy tires around.

@Ol2Stroker

8 ай бұрын

Most likely

I’ll trade ya my 66 Chevy c10 for the Mack.

Nobody see the new concrete in front of little shop?

@ricksmith4736

8 ай бұрын

It looks prepped for concrete in some of the shots....

@Ol2Stroker

8 ай бұрын

Don't look at that!

@brandonvarney7258

8 ай бұрын

@@Ol2Stroker Mind your business

@Ol2Stroker

8 ай бұрын

​@@brandonvarney7258🤣🤣

@ricksmith4736

8 ай бұрын

@@Ol2Stroker That will make a much nicer work area than the gravel..... Now peddle this mack and the dump truck to a new owner and get to work on your COOL projects, the Cat truck and your new V12 baby.......

Candidate for a drag racing truck : ) ?

@Ol2Stroker

8 ай бұрын

It'd be perfect for that!

FIRST!!!!

Dude, Please refrain from using all That Foul language, Thank you.

@Ol2Stroker

8 ай бұрын

It's all edited out what are you even crying about

@izzygray9389

8 ай бұрын

@@Ol2Stroker It was not edited out.

@Ol2Stroker

8 ай бұрын

@@izzygray9389 timestamp?

@ricksmith4736

8 ай бұрын

Almost as bad as that HORRIBLE Donald Trump and his MEAN TWEETS..... LOL... Do you have some pink crayons in your crying pillow room?

If ya paint that fucking frame I’ll love ya forever 🙃 but that truck is gorgeous. Thanks for sharing.

@Ol2Stroker

8 ай бұрын

What color?