Greetings from Istanbul. I am a furnace repair and maintenance master. You are very successful in the repair business.

Thanks, this is useful for everyone that is facing the same problem, I have also the same problem I called the technician and he came to my home and he said will charge 150AED I said no. I will change it on my own.

Saw “ @user” comment below who cleaned the thermocouple sensor with sandpaper! My thermocouple on same Smeg cooker and burner was discoloured with a film of blackened carbon deposit so I sprayed some “car engine carb cleaner” onto a small piece of green woven kitchen scourer (wearing nutrile gloves) and cleaned the thermocouple and tip until clean. It now works fine and lights immediately! Not sure how long this will last until I have to order the part and get it fitted as shown in the video.

Same Smeg model and same issue, will try cleaning thermocouple first and then order the part and follow your excellent video.

had the same problem, fixed it by cleaning the tip of the thermocouple with some fine sand paper until it was shining like new and just worked perfectly. there isn't much "stuff" to break in a thermocouple, so most of the cases this issue happens is just because of carbon build-up on that tip. for anyone else with the same issue, just try sanding it down first until bright and shiny :)

@abhishekdatta8800

2 жыл бұрын

Any particular sand paper to use?

@user-qz6ix7od3b

2 жыл бұрын

@@abhishekdatta8800 nothing particular, mine was p240 don't need finer than that. just don't use coarse ones

@abhishekdatta8800

2 жыл бұрын

@@user-qz6ix7od3b alright...thanks!

@freddielichtenstein4478

Жыл бұрын

This sounds worth a try first! Cheers!

Don't know how to.....can do! love it. I needed to know how to get the hob off to sort the vibrating that occurs when the cooling fan starts. Very helpful indeed.

@freddielichtenstein4478

2 жыл бұрын

Glad to hear it Dylan!

Well done mate. Good effort whilst holding the camera. Got to sort mine out now, I will post some videos of the oven element, now gone after a year replacement OG part!

@techmansa

2 жыл бұрын

Did it work bruv?

@prashlovestech

2 жыл бұрын

@@techmansa Short story no. See synopsis (1) and next steps (2): 1) I had to change a few things, one of which was the selector switch which had blown and the other was thermal coupler. In the process I also replaced the ignition element, after which still no success. 2) After careful inspection I believe the thermal coupler sat slightly lower then the others on the hob. In short even though this was OEM I suspect they changed the part during at somepoint. I'm going to order a generic replacement and see if that makes any difference. I have a 100cm dual fuel oven so the effort is a lot but will post some footage of the process if you're interested. If you follow on techworkshop1 on KZread and Instagram I'll get it up in the next few weeks.

Let’s hope your a gas safe engineer

@jonathanbowden1181

2 күн бұрын

Every time I go to the dump, there are piles of probably perfectly and easily repairable domestic appliances. But since (a) repairing is often more expensive than buying new and (b) people are so fearful of attempting repairs themselves nowadays, this madness continues. It's such madness that is fueling our enviromental and climate crisis and we must change. Absolutely if the repair involves disconnecting a gas line within the appliance, I would call in the pros, but as this a straightforward plug-in cable replacement, I would be comfortable that the risk is next to nothing if you take all the sensible precautions. *DISCLAIMER: this is my personal opionion as a layman - proceed at your own risk!*

nice to see these things fixed as opposed to dumped... I have a smeg victoria range and one oven gets hot without turning the temp on, so i assume I've got to strip the whole thing down like you did to get access to the back of the knob and change the thermostat... wish me luck!

@freddielichtenstein4478

2 жыл бұрын

Good luck Dec!

Thanks this is really useful! Look forward to more content!

Thanks.

I just got a new SMEG dual fuel range and all the burners won't stay lit. Also, there is a faint smell of gas. I thought this would be a good quality purchase....

Check you gas injectors are unblocked before going to the hassle of changing thermocouples (see 9mins into this video on how do this - kzread.info/dash/bejne/haaH17GNn9LUmbw.html). This is much easier job as can be done from the top without unscrewing and lifting the hob. In my case (SMEG SY93) they were dirty so restricted the flow of gas meaning there was insufficient heat to activate the thermocouple.

Should have took the back panel off. The thermostat is located there. Thanks for showing where all the screws are. 😂

Great video very informative and interesting learned a lot of info thanks RG nz

Folks : before u replacing the thermacouple try getting a small grit sandpapper and cleaning the probe part of thermacouple. Even if ut doeant look dirty cabon builduo in enough to keeo it from wirking correctly. Fixed 2 of my gas rings this way

Is there any sealing compound recommended when you crack open the pipe work? To re seal the nut?

managed to snap the little clips on the front, there goes £15 :D lesson to be learnt there

@freddielichtenstein4478

Жыл бұрын

Oops!

Is it the same solution for if it says the click sound but it doesn't turn on the flame.

This guy knows his stuff!!

Can’t the tips just be cleaned instead?

Amazing

Have you replaced the cup gaskets every time the hob is opened

Thanks for your video!🥰

You're good bruh

Nice

cant believe there's a large company named "SMEG". wtf?

I need you, where are you

כמה עולה להחליף דיזה בכריים

I will never buy another SMEG anything in Ireland. There are no technicians to carry out repairs if you run into any kind of problems. A disappointing aspect of their after service, considering the cost of their appliances. Will be buying more mainstream brands in future where technicians are plentiful.

What you just did was illegal

@freddielichtenstein4478

2 жыл бұрын

I do like to live on the edge

after 2 yaers stsds usefull TH ANX