Be sure to like and subscribe if this helped you!

I have a Maytag MHW5500FW front load washer which was draining very slowly and at times not at all and threw off the error code F9 E1. The problem was a clogged lint trap and while there are other videos that advise accessing the lint trap by removing the top and front of the dryer, this is a much smarter and easier way of accessing the trap directly through the bottom. 20 minute job. Thank you for the video, Mr. Fix it.

@timwashington824

5 жыл бұрын

you do need wash your right?

Thank you so much! Bought a house 18 month ago with this washing machine. Ran into this exact issue, followed the video, and had it all fixed in no time. This WAS NOT the first video in the search list, but it should have been. Others were much more complicated. Hardest part was moving the stacking dryer off and then back on.

Thanks for the video, but can we all give a ginormous middle finger to Maytag for making this so freakin inaccessible????

@OnotoleWasser

3 жыл бұрын

Right!? It is ridiculous! Even how panel is connected from the bottom, they put on one diagonal bolts and on the other diagonal plastic rivets!

@ericjm5264

Жыл бұрын

I'm currently loving the fact that I stacked them.

Double-thumbs-UP! I have a Maytag, white-face, “Commercial Technology” front load washer, the one discontinued in 2017 (I am protesting Model #’s when possible...). I SECOND other comments, notably : “Saved my bacon”, “20 minutes, tops”, “saved me $375”... Perfect use of KZread for real-life 21st Century communications; the laundry is OPERATIONAL, and this will be a scheduled annual task for THIS Mr. Fix It‼️

My husband was sure we would have to take the machine in to get it fixed. I suggested watching a KZread video and boy did we pick the right one. Our model of Maxima was slight different than yours but we a now had a general idea how to proceed. Our machine is at 5 to 6 years old and we had never cleaned out that trap. There was about $3 in change a lot debris and a 6 inch long and as as round as the tube was of wet lint he manually removed. Thanks for saving us a load of money!

@MrFixit-ks3xl

4 жыл бұрын

Sounds like you actually made a little money during the process!

Genius! Everybody else wants me to take the washer apart! Leaned it back and there it was! Didn't even have a panel to remove. You have the simplest solution. Many thanks!

Mr. Fix it, you saved my family! I have the exact washer (love it, btw) and she stopped draining. I watched one video where a guy took the door, back panel, top hatch and front panel off. I said to myself "I'm making sure the next washer has easier access." Then I saw your video and said to myself "Thank you Lord!" Husband held her while I followed your steps. Only thing different were the two body plugs on the opposite corner of the screws. I left those in place, but only slid one corner back under, as I'm cleaning this thing out every year. Ohhhhhhhhhhh the treasures were awesome! I had $0.74, a Uhaul key, tiny computer screw, numerous gum wrappers, duct tape and what I think is a paper towel. Thank you again for posting!

Let me tell you ! You saved us $$. The hubby and I did it. Holy crap! It was packed with lint and dog hair. Only got one coin. I’d send pictures if I could. Thank you thank you !!!

Thanks man. Great video.👍I've had this problem before and found a video that instructed me to disassemble the front of the machine to access this drain trap. It took my wife and me to reassemble it. We have the pedestal attached to the bottom but it shouldn't be much in the way. Also if you push the spin speed, soil level, and temperature buttons in that order of succession, and do that 3 times you can access the operation test mode and error codes. A (C00) will appear on the display and you can cycle through all the functions of the washer by pressing & hold the play button. Each function will read "C01 C02 C03 ect. Thanks again.

You saved my butt, dude. Thank you so much. Thought for sure I'd have to call a repair person. The trap had a nail and other gunk. As soon as it was cleared, the pump started working.

@charlenefuentez6984

4 жыл бұрын

You are weird

Thank you so much. I seen other videos that suggested you needed to remove the whole front panel assembly off. The method describe in your video is so much easier and quicker. Well done!

OMG you are the best. I watched another video of someone taking off the whole back panel. Your video is way easier by removing just 2 screws to get to the pump. I had like 3 socks of my 5 year old, a quarter, and lots of gunk. Once I found the tools it took less than 5 minutes to repair. Everyone that has the ability to do it this way will appreciate your help! Thank You!!

so glad you posted this....and I was almost ready to call a repair man....so easy and your the greatest

It was driving me crazy. I took back off first after watching some other video and realized drain was near the front. Then I attempted to take front off. I feel stupid. Thanks for this video

I'm having issues with the same washer. I was told by a repair person (Lowes warranty department) that I would need an entirely new washer because the bearings can't be replaced. I very handy and think I can fix it myself with the help of a KZread video. Thank you

Thank you very much! It looks pretty straightforward. I didn't even realize there was a drain to clean. I have to replace the door switch. The part came today, and I will go in from the top to access the latch and replace it; I don't want to take the gasket off.

I have what looked like the same model and it did the F09-E01 error thing, which means problems draining. Water in the tub. Checked the drain hose...not clogged or kinked. Washer finally ran a spin/drain cycle....moving it around probably dislodged stuff in the drain trap enough to empty it. I'll check the trap, 'cause I suspect that it's got a ton of crap in it after almost 10 years of use. Problem is, the washer is on a pedestal and the pedestal has a hard, non-removable top. Great design, Maytag.....with the pedestal on you can't get to the bottom washer panel. Ugh. Got my neighbour coming over to help me tilt it over safely, so I can remove the pedestal and finally get to the trap. WTF they didn't design easier access to the drain trap AND document this procedure in the user manual escapes me. Well....actually it doesn't escape me...they want the revenue from service calls. Not impressed. OK....after taking off the pedestal and the bottom panel (plastic one-way push retainers in two corners, really?) the pump unit was off to the front, not in the centre like in the video. Pump was held to the frame by some slotted rubber things, which were pretty easy to disconnect, to make it easier to get to the trap plug. There as a dime and some sludge in it....not as much as I had expected, though maybe the jostling and drain cycle I managed to run prior dislodged some of the gunk. Removing the plastic corner retainers is a real pain...fortunately, you only need to yank out one. All back together, with pedestal reinstalled. Just waiting for my neighbour to return to help me lift it back up again. Looks like the design of mine would be easier to access removing the front lower panel...will investigate that a bit once I get it back upright. 4 small screws along the bottom of that panel, and if it was designed better than some of the other stuff, it may just fit in and lock into the upper panel and so may swing out if the lower screws are removed. But not holding my breath. Good I didn't hold my breath. Taking off the lower front panel would require removing the door, lock mechanism, drum gasket and who knows what else. Another stoopid design decision, Maytag. Support the Right to Repair bill, folks! Then maybe manufacturers will stop the insanity or at least cut back on dumb, hard to fix designs

Thank you. This saved my bacon. My model has the pump facing the front of the machine, and is difficult to get to; but I was able to pop it off its grommets and pull it out to clean it. Saved me a $375 repair bill.

Thank you so much for this video! My husband and I solved this problem in about 10 mins for free thanks to you :) You are the fairy godfather of washing machines

Thank you for making this video. Now I can put the Mrs.' mind at ease and fix the washer that she noticed wasn't draining properly. Cheers!

Just ran across the video and thank you. I can’t use your method as mine are stacked. But I will cut an access panel in the side of it lol. We have huskies so this may be a common thing for me now lol

Thank you - this is so much better than removing the the front (which requires the top, etc.)!

Thank you for this video. You saved me lots of money fixing my own washing machine. I never knew washing machine has filter that can get clogged up. I have the exact same washing machine that can access the filter from the bottom. 👍👍

Way better than another video that i saw. That guy practically dismantled the machine just to access the drain. However... Still a disappointment that Maytag "couldn't" (wouldn't) design an easier access. Pretty obvious what they had in mind here.

Thank you this saved me hours and a lot of swearing....

Thank you so much for the video, You're a machine saver in this home

Thank you. Nicely done. Didn't know about that access panel.

Thank you man. I fixed the problem in 10 min. You make my day

Yeah, going from the bottom is easier. I've got different design though, my filter is on the front looking straight, not to the side. But after checking around I found out that it was attached by rubber pads and can be easily moved out. Not that straightforward, but I would say significantly easier than front method where you need to disassemble half of the machine including front panel.

@paulcharles75

2 жыл бұрын

Hi Onotole, are you willing to share a video displaying how you removed the filter? I’m pretty sure we have the same design.

Thank you so much for your help! We were stumped. You saved us some $$$

Saved me tons of time! Found a kid's sick in the filter

I took a drumel tool and cut a door in front of the machine and mounted it with hinges. I now have quick access to this valve.

@trig33kgirl

5 жыл бұрын

got a picture or video of this door you made? My problem is my dryer is stacked on top of the washer, so there is no way I am going to be able to tip it like this shows. :(

@fzr1000981

2 жыл бұрын

You probably only need to clean the "filter" (it's more of a coarse screen) every couple of years I would think unless you leave trash in your pockets

What a great tip. Fixed my problem.

Thank you so much for your video, I am so happy, you made my day, I fixed the washer machine,

Thank you so much! You just saved me a service call.

And as you can see we have some treasure..... good one made me laugh

Thank you so much for your video, it was perfect, I am really happy, I fixed my washer machine

hard to find this video , was spot on - thank you.

Great explanation! Thanks for helping me out.

Mr. Fix It, what's the model # of your washer in this video? I have one that looks like yours, and I have had the same symptom since day 1. The washer is already a number of years old.

There is no way I would be able to do this on my own. Why not put a panel on the front like LG with a hose? My goodness what a pain for a woman! I was set to purchase this with steam until I found this. Maytag you need to do even better.

Thank you so much, I have this same washer with the exact same problem!

Thank you for this good tip I really appreciate so tank you so much

Thank you! But honestly, why does @Maytag or any of the others have to make this so ridiculous to access???

Thank you, mine is not draining completely, I'll get my husband to check that, too bad that this little filter isn't in a more easily accessible spot.

perfect video...on my way

We have a Maytag front load washer.shows codes Eo1 & Fo9. Pulled filter several times. Clean. What else can I look for. My wife wants me to replace all drain pipe and redo it. HELP

I am having major issues trying to fit the filter back on. It's not screwing back on tight. Idk what is wrong with it

I figured we had the same washer but ours is a MHW 4200BGI and under the panel it's quite different. I think the hose is clogged up on ours but wonder if I could repair it myself as easy as you show in your video

Is this really the easiest way to clean? I have had washers before with front access. I know they recommend cleaning every 6 months but for my set, they are stacked with the dryer on top and a mounting bracket. This seems excessive! Is there an easier fix you know of?

Thank you. Great video 👍.

You make that look sooo easy....here I go...lol

@mrs_d3n1mx28

5 жыл бұрын

y Marie how'd it go!?! I'm too scared to try

Do you have to remove it from the pedestal to access it?

Thank you for posting! Fixed it ✌️

Wow Amazing Thank You!!

Thanks for the tip 😊

Life saver!

Wow its really help me this a lot. Thankyou for sharing

Mr Fix it I have a MHW6000xw2 maytag maxima washing machine what is the best way to access the coin or trash catcher?

Great tip! Thanks so much.

My drain pump is pumping, but not properly. It just spits water slowly. Could that be the problem?

Can you please tell me what model of maytag the washer was ,,

Perfect fix! We found 1/2 of a bra's underwire jammed into the pump..

My door wont open and it wont turn on at all. I was washing clothes, then the power went out. Now, nothing 🤷🏻‍♀️

I have the exact same thing and mine the "air trap and pressure sensor"It has been changed 3 times.I am happy that I took a prolonged insurance policy of 5 years.The next time it needs to be changed they have to buy me a new one.So ya.They were expensive to buy but in the end they are shit.I mean they are just garbage.

Can't you go in from the back?

Comment régler code d’erreur sur L’aveuse Maytag frontale MHW6000XG2 F6 E1

I have a maytag from 1999. All i had to do is unscrew two screws and remove a panel on the front. I find it stupid that this is a known issue. INstead of putting a door like Samsung and LG......Maytag decided to just make you do all this work.

@filipinoy7937

6 ай бұрын

LOL, just watched other videos where they litterally take the top, back, and front to do this. It's crazy.

take the back top and front off you can get to the pump easily

My machin is not exit water

Thanks, great explanation, made a little money out of the filter 😁

Thank you

I appreciate the video, and the instruction which is great in most circumstances probably, but my machine is stacked with dryer on top. No way I can get to the bottom and the door to clean out without bringing in a repairman. The machine came with my home. I would not have purchased. How frustrating. I've cleaned inside as best I can am sure I will end up with expense to resolve in the future.

I can't access mine like this is has the drawer on the bottom, not sure how to get at anything.

@EricNeilson_

5 жыл бұрын

@@donaldberry6571 it's a bit of an older model. I had to remove the rubber seal/gasket from the washer, then I could get the front door off (had to unhook the electronic sensors from the door) had to remove the top control panel too. The front door assembly had to come right off and only then could I get to the filter which was full of disgusting crap (metal shards, money, etc). Getting the rubber gasket thingy back on took 30 minutes, the outer seal metal device thing (with the spring) was insane to get back on. Took all morning (3 hours).

Mr. FixIt, please help!! I have a maytag Neptune washer that I can't get the horrendous smell out of! I've tried bleach, vinegar and baking soda and Affresh, all to no avail. I'm thinking this could be the problem after watching this video. Do you have any clue if mine is in the same place on my washer? Thank you in advance for any advice you have to offer!

@sinlizzie9985

5 жыл бұрын

*EDIT* I should add that I brought this set used and it didnt look like it was cleaned ever when I first got it

@jeffmalone5009

5 жыл бұрын

YES! We had a terrible smell coming from our washer. The drain wasn't clogged, but after some research found that the stink was from the drain. Cleaned it out like this vid described, and BAM no more stink...

Maytag, such stupid design. My old Samsung has a access door.

Just in awe of what a dumb design maytag did to access this. Is this a roundabout way to collect more money from customers.?!

OMG Pain in the A** location wow...anyways...note to self...not this model!