U literally just taught me how to fix all the issues with my Honda

literally was only planning on doing my valve cover gasket and vvt solenoid. but i put power steering fluid in at least once a month. 03 accord as well. so might as well. gunna have to move that hose out my way anyways. great video.

Okay you made getting the vtech seniod off loom like a piece of cake. That sob took me an hour

Great video. You get right to the point with all this stuff and my oil leaks are fixed now. I had 2 of them. Thank you☺️

@Donnythelatemodeltech

2 жыл бұрын

👍

@donniev8181

11 ай бұрын

​@@Donnythelatemodeltechis there anything else on the front side of those engines that could leak oil?

Excellent video exactly what I was looking for!

Wow this is the real deal. I am taking my car tomorrow to my mechanic and show him this video

bought a 2003 honda accord a few weeks ago. The own said there were no oil leaks. The vtec solenoid threw a code. So i orded a new one. and went to replace it. And wouldn't you know it was leaking oil. along with the oil filter. probably going to replace the gasket on the valve cover soon just to be safe. car has 225000 miles on it. So im actually kinda impressed I didn't find more. But it was pretty well maintained. it was a one owner car.

Good vid man…gonna use this as a guide to fix up my lil project rsx that has some oil leaks lol

The VVT solenoids are known to form cracks in the casting. I just pulled one with three cracks in the top and two in bottom. Very faint and hard to see, but would leak a quart of oil about every 50 miles. Just replace the whole VVT solenoid, not the just the gasket. No leaks for me any more. The guy at the parts store said this is common and he's seen internal cracks which send metal chunks in to the engine. I knew the VVT was leaking from getting under the idling car and seeing oil drips from the VVT location.

@raymondharo9974

11 ай бұрын

My 2003 Honda Accord 2.4l consumes motor oil pretty quick it has a slight leak that might be coming from the head gasket idk

@user-nh7mx5xo4b

9 ай бұрын

These K24s leak from 4 areas the power steering being a culprit, the VVT solenoid o rings leak which hangs on the side of the next culprit which is the VTEC solenoid, the last and most common culprit is the valve gaskets as they leak into the exhaust gaskets and make it look putrid. I'm in a 04 accord lX auto 344,119miles as I write this, 14k miles on a low mileage transmission replacement (07 accord 123k original mileage) but Im losing a lot of oil. I will be replacing all those gaskets and parts see if it helps. Posted Sept 30 2023

thanks for this - about to do the same basic stuff on a k23a1 (08 RDX) and it looks more or less the same. the RDX just has a bunch of extra stuff on top for the turbo. very helpful to see what the solenoid valve cover looks like back there.

@TallFamilyFilms

Жыл бұрын

I JUST posted this video on doing the RDX today if it helps you - kzread.info/dash/bejne/ga51xs5xp7TfYLQ.html

Thank you very much and have a successful in your business

This is a great video please make more

Great video, i need this job done on my 2005 CR-V K24 plus the oil pressure switch. Massive leak all over

@Donnythelatemodeltech

Жыл бұрын

You can do it!

As much as I love this video , because of same oil leaks on my Honda. I think I love the Irezumi you got a lil more

@Donnythelatemodeltech

2 жыл бұрын

👊👊👊👊👊👊👊👊👊👊

Awesome insight, thanks

This video is very helpful

Amazing video I like it very easy and informative

Subscribed today! Thanks

Going on 210,000 on mine, came here to figure out where my oil leak is coming

@Donnythelatemodeltech

Жыл бұрын

Leaks here also kzread.info/dash/bejne/qYut1tqIoZfReNY.html

@danjones3402

Жыл бұрын

How is it holding up? 160k on mine and I need to fix these leaks to...

@stonelox

Жыл бұрын

@@danjones3402 150k on mine and same. Since it’s worn out rubber I bet it’s related to age more than miles. Mine is 2005

@woodswalter

Жыл бұрын

Same for me. 315 thousand miles and still going. 💪🏽

@WUBtile

Жыл бұрын

305k just now leaking was rebuilt 6 years ago

I took my 2010 Accord with 139k miles on it to a trusted foreign auto repair shop yesterday for a bad oil leak. I was thinking it would be a bad oil pan or gasket but he told me it was a solenoid today 😬 I'm glad because a pan or gasket replacement would cost more. He told me $139 for part and over $100 for labor

@gerapic25ify

5 ай бұрын

what Parts?

@lindaeasley5606

5 ай бұрын

@@gerapic25ify Solenoid . The old one was cracked

Masterful!

LOL these are literally my 3 leaks. I changed the valve cover & replaced the vtec solenoid recently, power steering is all that’s left.

Great video

Easy as 1,2,3. 👍

Gracias amigo. Very helpful

@Donnythelatemodeltech

Жыл бұрын

👍

The old power steering pump gasket apparently would just get hard and not able to properly seal and the new orange one is supposed to stay more soft and rubbery. Mine actually ended up sucking air in and bubble up the power steering fluid and it would over flow out of the reservoir, almost thought the transmission was going bad because it would make revving sounds as you accelerated

@PHOQUR

5 ай бұрын

Yea, it’s only orange so you know if it’s been replaced before when you open it

Great video major help.. Question where is your shop, also do you deal with hybrids its a honda accord halfhalf

thanks! mine has that winnie sound when i drive i didnt know it was caused by that red seal

Always changed valve cover gaskets on B series motors all the time without Honda bond and my first K series engine I changed it and I had leaks everywhere so I guess I have to go back and put Honda bond on it.

I had all these leaks on my honda element plus the oil pan. Cost me about $2k!!!

Good Job

Thanks man

I have a 2004 Honda accord ex 2.4 I had a oil leak from the valve cover gasket and decided to change it and the other seals back in may now it leaks now from the v tech solenoid where u out the o ring at which is weird but u think it depends on where I got the part at kuz I bough that o ring from a source off eBay the valve cover with the seals I got from rockauto , that’s the only area I see the oil leaking at

Timing chain 👍🏼

Would you happen to know what the piece is called that the smog hose connects to? I somehow broke it off when replacing my valve cover gasket on my 2003 Honda Accord. The smog hose is the small hose next to the emissions hose on the air filter. I’m needing to know what the smog hose runs down to so that it can be replaced. Any help is greatly appreciated. Thanks in advance.

do you need to drain your oil for this job? i plan on replacing the same gaskets as you: vc gasket, powersteering pump o ring, and vtec solenoid.

so no need to torque the VTEC Solenoid? I saw you used a drill. is It okay if I use my own 10m socket wrench that I used to crack them loose?? I haven't done my gasket on my VTEC solenoid, because I don't want to over tighten them. I'll love a feedback on this.

I think my 3rd tube from the right is leaking. what's the process of removing and should I seal the threads? Thanks

Excellent and very informative but if you could slow down the movement of the camera but otherwise will subscribe and look for your other videos.

Question. Can I pressure wash the fuel rail area without the cover? I'm doing this job now and it is filthy under the fuel rail cover. Thanks man

Hi ,what a torch pressure have you used for this Top ,no 6 of 10mm nuts?

My valve cover now has a small gap and I can see the gasket from where it meets the heads is this normal? I pounded it in the best I could torqued it all to spec and it doesn’t seem like it’s leaking I’m just concerned

Use an 1 1/8" socket to lightly tap in the 4 round gaskets in top of your cover.

Hello ! What is the oil pressure switch socket size on the spool valve ?

Hey there i just did the valve cover gasket on mine and i got it all put back together and torqued everything down to spec and i have a small gap all the way around the valve cover and the mating surface, is it supposed to look like that?

My 2000 Honda Accord LX has a valve cover gasket leak, shouldn't I check the oil pressure sensor for a leak also?

Is the v tech solenoid in back of Power Steering wheel pump on a 2005 Accord?

is Fel-proo a good option ??? Thanks in advance , i have a civic 2.0 Si

My leak is coming from the v tech solenoid the part where u put that o ring around that sensor I see it leaking from there but nowhere else

On this engine what is the sensor on the front of the engine left of center near the head? I had mine replaced because it seemed to be leaking oil and it is still leaking. I don't know what it is called. TY

Hey there,. I am assuming that my 03 Element is also a K24 motor,.. how long did this job actually take? I dont have the tools or place to work on my motor right now,. so I am trying to get an idea of the "book time" ;a dealer or repair shop "could charge"

this makes me want to clean my valve cover so badly

@094340

3 ай бұрын

Please, if you are going to clean it, don't do it badly.

This will probably help me 185k miles and looks like I’m smoking out my hood on hills and other higher elevation areas where I live it’s a big joke between me and friends but I hate that smell it comes through tall my vents with the defroster on feel like I’m getting High off that

which spark plugs did you use?

Do Toyota cars have the same leak issues? I always buy Honda but they always have these leak problems after 100k. Both my Civic and Accord are in the shop right now. I’m planning to buy a Toyota for my next car.

Donny I have an 06 honda accord with the 2.4 engine. I have one leak I'm having a hard time finding. The oil is getting splashed on my alternator. When I get under the card my passenger side frame is covered in oil. I've changed so many gaskets on my car to figure it out but I still have that one specific leak. I put a lower mileage motor in my car and changed all gaskets but the head gasket set.

@Donnythelatemodeltech

Жыл бұрын

Watch these video yet? kzread.info/dash/bejne/qYut1tqIoZfReNY.html the forgotten gasket is in this video

K20A2 130k miles and have almost all the same leak problems(i think) power steering making a racket and engine leaking oil (vtec solenoid and oil pressure switch the most likely cause?) Its weird the power steering sounds/works worse when there is cold weather( less than 50deg F)

Why did you use Bosch spark plugs and not NGK or Denso? Those are factory I believe to that vehicle.

Hiii Donny I have a question, a mechanic told me I have an oil leak and need a new engine cap, he did show me. What is that?

250k leaking a little but nothing concerning figured I’d figure it out before it gets too bad

2003 honda crv oil cooler gasket how to replace.pls.

Do you have to use Honda bond ? Anyone know any alternatives ?

Great video. Im about to be doing everything you just did in this video. When you pressure wash the motor are there any areas that need to be covered ?

@Donnythelatemodeltech

Жыл бұрын

I would try not to spray to much behind the headlamps. Once you get water in them... its really hard to get out

Hello thank you for all you do this video helped me out a lot I do have a question! I just changed my power Steering holes By any chance do you know the name of the part in front of the engine the vtec

@Donnythelatemodeltech

Жыл бұрын

Need to be alittle more specific

Cool Guy.

I've got a big leak at the VTEC strainer cover on the front, next to the belt tensioner. Do you have a video on that? I think you had the gasket in your kit with the VTEC solinoid?

@Donnythelatemodeltech

2 жыл бұрын

I pull one out in this video . kzread.info/dash/bejne/X4WYlqqgea7UYbw.html

@094340

3 ай бұрын

I know your post is 2 years old, but I just replaced that strainer. 2 10mm bolts is all that holds it in, but you have to take off a bunch of stuff to get at it. Honda engineers didn't think that one through.

The orange one supposed to last longer & also to easily identify if it was ever done since it was a manufacturer problem

Have a 2005 CRV with oil dripping down pass side of subframe. Resealed the timing chain cover, did the front crank seal, and valve clever gasket. Still leaking. Solenoid under cam sprockets not leaking. Leak seems to come from right behind AC compressor. Any thoughts on what it would be?

@Donnythelatemodeltech

2 жыл бұрын

Your fix is in this video, it's a screen gasket behind the power steering pump kzread.info/dash/bejne/X4WYlqqgea7UYbw.html

@jamesf9074

2 жыл бұрын

@@Donnythelatemodeltech ok, I found that video too. I’ll check it out. Thanks!!

@Donnythelatemodeltech

2 жыл бұрын

@@jamesf9074 yeah, the compressor video isn't label and oil leak fix, but i do , fix it.

Hey, I love the vid and your spot on with your work. I just did this exact job on my friends 03 accord. Now it's leaking from the vtec solenoid area (3rd time now). I replaced the valve cover gasket (was needed), replaced the vtec gasket. 2 weeks later, leaks again at vtec solenoid. Replaced the solenoid (used the new gasket it came with). And after 3 days leaks again. What am I missing on this?

@Donnythelatemodeltech

2 жыл бұрын

Strange

@Donnythelatemodeltech

2 жыл бұрын

I'm pretty sure the bolts are all the same length, correct?

@DyLan-vy8kp

2 жыл бұрын

@@Donnythelatemodeltech I believe so, all 3 behind solenoid

@trippin8585

2 жыл бұрын

this may be far fetched, however I hear that if you pcv system is bad, there will be pressure and cause leaks. check your pcv valve and hose. there are many videos on it. no harm in doing so. I'm waiting for some time off from work to finally get my hands on my crv 03.. I'll be switching the gaskets of the part he showed here as well as the other gaskets/oil strainer. if you go to any parts diagram for your engine you will see where the gaskets are. no need to replace unless you see evidence of leak, one is right behind belt tensioner and the other is below the engine mount I believe good luck www.hondaacuraonline.com/v-2003-honda-cr-v--lx--2-4l-l4-gas/engine--vtc-oil-control-valve

@DyLan-vy8kp

2 жыл бұрын

I found the source and fixing it

What do you usually charge for a job like this ? Abs your video was very helpful

@Donnythelatemodeltech

2 жыл бұрын

3 hours

@donjohn3652001

2 жыл бұрын

3 hours? 100-120 hr?

@Donnythelatemodeltech

2 жыл бұрын

@@donjohn3652001 correct

is there a difference between the blue and regular looking gasket seals? Is one better than the other or is it better to go whatever option?

@amirparvez5415

Жыл бұрын

Blue gasket are aftermarket I believe. Personally i would just go with oem if the price is not much different

You didn't mention the leak on the passeger side underneath the valve cover (side)

What deep socket size did you use to remove the pressure sensor on the VTech solenoid?

@joehodgsonphoto

Жыл бұрын

22mm

What’s the process you used to safely power wash all the old oil from leaks ?

@Dougarony

8 ай бұрын

engine degreaser, no need to power wash.

Do you have this for the 2008 4 cylinder accord?

@Donnythelatemodeltech

2 жыл бұрын

This is the same as a 08

I grade videos on a burrito scale & you get 🌯🌯🌯🌯🌯

@Donnythelatemodeltech

3 жыл бұрын

😆

Can you come fix my 2008 accord?

Wish you would do a vid on how to power wash the engine without harming electrical parts

@curtisbrown7389

9 ай бұрын

Just cover all electronics with plastic bag

Why didnt you install the vtc strainer gasket? Didnt it come with the kit? My sisters car is doing the same thing, same year same car. I should probably do everything same time. Maybe a 3-4hr job if i dont include the oil pan gasket.

@shawntuan1

2 жыл бұрын

Mechanic quoted her 2500$ for new solenoid. When the problem isnt a solenoid, its oil leaks including the vrc strainer. No check engine light, no vtec issues, so why quote a new solenoid. Very few honest mechanics in the world. A whole lot of rotten apples man.

@Donnythelatemodeltech

2 жыл бұрын

I replace one in this video around the 7 minute mark. kzread.info/dash/bejne/X4WYlqqgea7UYbw.html

What is that grease you put on the power steering washer and value cover tube? Got a link where I can buy it?

@edy5082

Жыл бұрын

3m silicone paste

Can someone send me a link to find a radiator for my o3 accord please, cl9

Do you have to remove the spark plugs? Aside from the coil to take the cover off

@Donnythelatemodeltech

Жыл бұрын

Spark plugs can stay

Does this also apply to the 2008 honda accord s or are they different

@danjones3402

Жыл бұрын

Same engine until 2013 I believe..

Mine leaks from the right back side cover corner doesn’t seem to be coming from the cover but the catch can part in the back gets filled with oil time by time any suggestions?

@jaym.1106

Жыл бұрын

Oil gasket changed mine 9 months ago had oil there also .

@heavy_hittahz

Жыл бұрын

@@jaym.1106 yea had to buy an oem one cause I had changed it out with an autozone one. But no more leaks 🤞

I have a serious leak that needs to be cleaned, did you say i could just power wash the entire engine? Even the alternator?

@Donnythelatemodeltech

2 жыл бұрын

Yes

What was the stuff in the can you brushed on the O-rings?

@Donnythelatemodeltech

2 жыл бұрын

amzn.to/3zjXSaV

@phamdavis

2 жыл бұрын

@@Donnythelatemodeltech Thanks

at 2:49., what is that little stamped steel cover being hidden by your finger thats below the valve cover and behind the power steering pump? I'm 99% sure that's the latest and greatest oil leak on mine.

@Donnythelatemodeltech

2 жыл бұрын

Vtc screen. I replace one in this video around the 7 minute mark. kzread.info/dash/bejne/X4WYlqqgea7UYbw.html

@RobertL78

2 жыл бұрын

@@Donnythelatemodeltech thanks!!

What is the clear grease you put on the power steering o ring?

@Donnythelatemodeltech

Жыл бұрын

Probably automotive silicone paste

What is the socket size for the VTEC oil pressure switch?

@vinivicci1

9 ай бұрын

FYI. I used a 24mm socket and it took out the oem. The one I got from Napa is bigger and I just got the one that said guaranteed to fit. It installed fine.

What’s this specific service called? Or do you just ask to fix all these 3 issues?

@Donnythelatemodeltech

3 жыл бұрын

You'll have to ask to fix them individually.

Does this k24 accord use the same vtec solenoid as the k24 acura tsx

@hectorsantiago8116

3 ай бұрын

Yup.

Where do you recommend buying oem honda parts from?

@Donnythelatemodeltech

Жыл бұрын

Not ebay. Lots of fakes. Take the part numbers to your local dealer "parts counter." These guys are usually really helpful, they get paid commission. And usally the prices are much cheaper than online.

Where did you get that plastic punch?

@Donnythelatemodeltech

2 жыл бұрын

This is the same thing amzn.to/3vg6Rty

My Honda Accord 2.4l 2003 literally has all these oil leaks. Vtec solenoid, timing cover gasket and oil pan gasket. $1,198 total! What’s a good price for all these leaks? Thanks

@Donnythelatemodeltech

3 жыл бұрын

The labor is 98% of y o ur cost at a least 120 an hour.

@tatialo37

2 жыл бұрын

Too much!!!!

@nickm4874

2 жыл бұрын

$1198!!? Did u walk in the shop with a giant "S" on your forehead?

Wasup bro I had some questions

What are torque specs for gaskets?

@arturzajac8291

Жыл бұрын

Am interested to figure out as well ? !

I didn't put any silicone on the corners when I changed my valve cover gasket, that might be why there is still oil pooling up on the back side of the engine.

@Donnythelatemodeltech

Жыл бұрын

Good possibility

He said k24 very cool lol. It's disaster engine. serious problem with vtc actuator, timing chain stretched prematurely. Vvt solenoid getting stuck.

I prefer grading on the Taco Index 🌮🌮🌮🌮🌮🌮🌮🌮🌮🌮🌮🌮🌮

you can work on my Accord ANYTIME!

@Donnythelatemodeltech

2 жыл бұрын

👍