The problem with the H1 is that you need a plasma cutter to replace the radio because a regular chainsaw will not cut through the metal dashboard.

@jenniferwhitewolf3784

5 жыл бұрын

🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 or tons of 💵💵💵💵💵💵💵💵💵

@leroyroutt4791

5 жыл бұрын

Silent Epsilon loved your comment and yes I saw that particular video with the plastic dashboard vs the chainsaw!

@brianthaxton229

5 жыл бұрын

The Humvee and the H1 are two different vehicles

@silentepsilon888

5 жыл бұрын

@@brianthaxton229 .... It is my understanding that the original Humvee was the military vehicle made by AM General. AM General then sold the rights to make a civilian version of the military vehicle to GM which was called the H1. GM then created the Hummer brand and the models they made were called H2 and H3

@MDC2020

5 жыл бұрын

​@@brianthaxton229 The Hummer H1 is a four-wheel-drive utility vehicle based on the M998 Military Humvee, which was created by AM General the H2 is the crappy one lol

When he started talking about building a truck I was waiting for him to pause for a second or 2 and then say Let's get started. I would LOVE to see him build one.

@Rubbernecker

4 жыл бұрын

@lee minnis, damn that's funny!

@rodolfoplasencia4953

4 жыл бұрын

Autotech 21 he mentioned and shown in one of his videos the frame of one, visually scaled for the explanation purposes. Now in that scale or prototype he may wanted to think on oval tubbings instead of circular. I rather go oval than square or rectangular so they last the longer, not exactly like an egg straight up, but I would go for a perfect oval (tip and bottom of same thickness so it will be hard to impossible to bend and crack unless a 10 times or more its weight, yet, if those tubbings get to be 3/8-1/4 thick, made out of steel, because titanium will take another government to allow it. Aluminum can be attainable, as well as steel. But again, it's sides can be flatten so things can be installed on them.

@Xlaxsauce

4 жыл бұрын

it would be tough, but extremely ineffficient on fuel and it would shake itself apart in the future because mitigating vibration and what not require knowledge

@JimsEquipmentShed

3 жыл бұрын

@@rodolfoplasencia4953 Do you happen to remember what the name of that video was? I was referencing it for a friend, and couldn't find it. I thought it was part of one of his ATV videos.

@rodolfoplasencia4953

3 жыл бұрын

@@JimsEquipmentShed I don't remember the name of the video but, I remember in it he checked the bottom of his 1999-01 Grey Dodge Ram (second generation)'s bottom, I believe in it he changed the oil, painted it's bottom with like a light yellowish paint, then he talked about the break lines made out of a very easy to rust material so he mentioned "they should be made out of copper, that he changes all his break lines with copper tubings or they'll fail on the worst case scenario". The model is scaled in tubings but, checking my 1999 Ram, my chassis is made out of rectangular tubings. Rectangular allow us to hook up to the chassis shorter screws and pieces than the length of the diameter of a circular tubing. I tried to explain several things to Andrew but either I haven't seeing an answer or he couldn't answer due to his time schedule which I understand, or his demand of work or simply KZread answering system or algorithm is way too long to go through it all the way until we find if he wrote me back something. Is ok. But, tubing chassis is stronger but too wide. Draw a tube or check any vehicle and you'll see that a tube chassis is too wide that's why to me, in my humblest opinion rectangular tubings with it's corners round are better. The shape of the chassis is important, steel is a very strong material. Aluminum too, and lighter. I don't know how feasible is to use carbon fiber on chassis but, I saw once in a KZread video a gentleman hitting a fender with a big slash hammer, no scratches, that's impressive so, I won't be surprised to see that someone is employing carbon fiber to make a truck chassis.

"That should definitely last the life of the truck... probably" toooo funny.

@mw3gamer23

4 жыл бұрын

I feel like that was sarcastic lol

@grantmo821

4 жыл бұрын

@@mw3gamer23, probably more a case of being cynically realistic It's a workaday utility truck that seen many, many thousands of miles of rough, unpaved roads & salty winter highways, probably for the entire 20 years of it's life. It's accrued a ton of wear & repairs, & probably well beyond the makers expected lifespan. The odds that it could catastrophically break down or fall apart for good in the next year or two is probably a far more realistic possibility than not.

@johnsullivan2430

3 жыл бұрын

"50% of the time, it works every time."

@MikeLeeGG

3 жыл бұрын

yogi berra of youtube

@thomasdobrenick1549

3 жыл бұрын

He has a point the olastic my crv is made bends like paper if u touch it

Andrew I am a Senior Engineer in Toyota's Paint Group. Here is the scoop on frame rust: 1) Truck frames are a good grade of high carbon steel, designed to take years of flexing and impact loads without cracking. Most of the corrosion resistant stainless steels have poor crack resistance, and don't flex as well. 2) Frames are typically run through a 18 stage paint process. The parts are degreased, rinsed, have a Zinc Phosphate corrosion inhibiting coating applied. They then get dipped in an electrocoat paint tank, and hit with 380-450 VDC to coat the parts all over. The paint is then baked on. The E-Coat is usually a cathodic epoxy, with excellent corrosion resistance. 3) Once the truck is out in the field, the frames start to pick up rock and gravel scratches. These go through the paint, to the steel. The bare steel starts to rust, and the rust starts creeping under the paint. As the rust creeps, the paint starts coming off in large flakes. 4) Good undercoating, with either a thick wax, or a rubber part can help. Coat the areas that get the most rock chips, and the frame life can be extended. 5) Frames that have boxed sections, as opposed to C channel style frames, have a worse tendency to rust, because salt gets into the box sections and pulls moisture. The brine solutions they are using now instead of rock salt seem to be much more corrosive. 6) It's unfortunate, but to make the trucks last 20 years without rusting out would probably make the selling price at least 50% more. The hard reality is, very few people would want to pay for that. I'll be glad to answer any questions you may have about automotive paint processes. Keep up the good videos, I watched your excavator thumb video before I rented one for a weeks worth of work. Good stuff!

@robertmiller4664

4 жыл бұрын

@A Light shining in Darkness You are correct. The C channel frames used to rust at the crossmembers, where there was a place for salt to rest.

I drove thin and thick skin hmmwv’s in the corps for 4 years, trust me when I tell you, you do not want to buy one man, a lot of problems, the vehicles service life is usually up, yet they still run them to the ground instead of an overhaul, overheating issues, towing issues, engines are not near as powerful as anyone thinks, the reason they look so good half the time is because of the CARC paint, very outdated piece of machinery if you ask me, they also eat fuel, hope that helps.

@AndrewCamarata

5 жыл бұрын

Ok, thank you for the input from someone who has actual experience with the vehicle. Many others on here have said the same. That's too bad, they looked like they had potential.

@rbilardo47

4 жыл бұрын

Semper Fi Brother.

@davidbryant88

4 жыл бұрын

Our fire department bought one for a brush truck. It was out of service more than in. That 6.5 engine is junk. We are 100% donation supported. We couldn’t afford to continue to spend money fixing that motor. It had 40,000 miles on it when we picked it up.

@sadinofrio

2 жыл бұрын

I'd like to see Andrew get his hands on a Gama Goat!

Best KZreadr ever, videos are long, detailed, hes hard working. Explains everything to you plus more

This video was exhausting Andrew

@killdiesmash9743

5 жыл бұрын

I SEE WHAT YOU DID THERE

@alexsbikesandmotors

5 жыл бұрын

I used to work in a muffler shop but I found the work exhausting

And another great video. Thank you Andrew. Your "off the job" videos are just as appreciated as your "on the job" videos.

you do get the maximum out of your equipment. and that is why i watch. gives me confidence that i can do the same. keep up the good work.

Hey man! first off I'm a huge fan, I've learned a ton from watching your videos i think they're great videos and your skills are undeniable. I finally saw something that I think you didn't do quite right, I was taught when checking ball joints on a lift like that where the tires hang you should put something under the lower control arm (we have an old brake drum with a 4inch diameter 5 foot long steel pipe welded in the centre upright) and lower the truck down onto it until the wheel is at ride height to check ball joints. Because in my experience the spring pressure and gravity holding down on those components can hide (not always) but can hide a bad ball joint. Anyways that's just my opinion :) thank you for sharing your gifts and talents with us all!!!

Andrew, can you do a video on how you price out driveway or excavating jobs? Great video. Keep them coming.

@CJ-eo2xz

5 жыл бұрын

He has his contact on his website. Search Camarata landscaping.

@helenreddypantysissy4030

3 жыл бұрын

Camarata still has his contact on his website. Search Camarata Landscaping.

The Hollander Interchange number for that trans is 400-58807 (Hollander is the interchange numbering system used by all auto salvage yards in USA) Fits these models: MONTERO 87-88 MT MONTERO 89 MT; 2.6L (4 cylinder) RAIDER 87-88 MT RAIDER 89 MT; 2.6L Chrysler made it obsolete, sold for $1925 before that. Mitsubishi still has it listed as active for $2045

@rlewis1946

5 жыл бұрын

Your comment made me want to learn more about the Hollander Interchange System for finding parts. Here’s a link, if others are interested in how to use it: hollanderinterchange.net/How_To_Instructions.pdf Thanks for helping me learn something new, which is what I do ever time I watch an Andrew Video! RL Buffalo, NY

The other day when you were doing the boat 🚤 repair, you were like "I wasn't even going to record this". My lady and I look forward to anything you are doing. It totally makes our day when we can watch a video 🎥 from you. 🙌 When you post a video, it's a happy day.💃 Keep'em coming. From you friends in Mahopac.

Andrew, the hanger by the rear shock, the pipe is rotted out halfway around. May want to replace while weather is nice.

Some firms value resale more than satisfied consumers, they are not used to customer who cares of quality than quantity. Thank you for sharing your amazing video. God bless you and your family

I just love the way you look after all your stuff. Keep up the good work and videos from UK

This one time at band clamp... great videos Andrew.

Andrey, I live in Russia but I constantly watch your channel, I recently subscribed to it. I just admire you, you're a Jack of all trades! Good luck in your business!

Love the strait forward approach, weld, burn, build it. Thanks for reminding me how I'm am!

I have 91f 150 that i just fell in love with. I can afford to purchase a new one but, like you said, they are full of gadgets and bells and whistles that one cannot fix. You are wise in how you think about vehicles. Thank you for being honest and clear in explaining your choices. I just can't wait to see and hear about your work and experiences.

When Andrew is talking to camera, I often wonder if Levi is thinking "Is he talking to me? Who is he talking to?"

I just love it when you rant. LOL! ❤ Levi in his easy chair. 😊

@j.zingler6735

5 жыл бұрын

Mr. Camarata petted Levi with oily hands. Levi needs a bath now.

@markbonham3477

5 жыл бұрын

You took the words right out of my mouth Ms Blasco. He has such a problem with manufacturers not keeping things simple and honest like he lives his life and when he goes on a rant I just love it!

@cathyblasco4497

5 жыл бұрын

@@markbonham3477 "It's just STUPID." HAHAHA!

I used to live on a island of the coast in Australia, most of the time your vehicle was driving on the beach for 70% of the time , we used to use cooking oil mixed with used engine oil and spray everything underneath and inside any panels and bottom of doors you can get to , then drive along dirt roads to get as much dust as you could to stick to it . This seemed to work really well if you did it every few years , and that was launching your boats straight off the beach as well , thanks mate for the great videos cheers from down under.

Been following your channel for some time, that muffler pipe replacement was the first time I saw you say good enough. I was always proud of you for going that extra mile and doing the best you could and it showed when the job was done, Please don't ever settle for, "good enough".

@AndrewCamarata

5 жыл бұрын

The car company's settle for "Good enough". Selling these junk vehicles that only last 15 years. A truck could be built that last 100 years.

@5:30 man's so hard he uses his hand as a spanner

@FixItYerself

5 жыл бұрын

Man of steel

@PatrickWagz

5 жыл бұрын

I heard he can torque lug nuts to 80 ft-lbs with his hand

@monkey_spanner8433

4 жыл бұрын

@@PatrickWagz his poor wife

@deverickburrows6500

3 жыл бұрын

@Tom i noticed that too

I love levy, he is a great companion/friend

12:49 Levi so cool. Right on Andrew regarding the car companys making parts that don't rust!! You the man!

You are such a great example Andrew, people watch your vids and realize you're right and we should and can just take care of what we have

I threw a quick coat of high heat outdoor spray paint on my exhaust joints and hangers. Took like an extra 20 minutes but didn't rust as fast

@johndowe7003

5 жыл бұрын

i did that to my tractor, too bad it fell out and i ran it over xD

andrew your making so many vids i love it ty for sharing

Enjoy your vids so much! Thanks for sharing your day-to-day with us! Less it takes great deal of extra time & effort to edit all this video... bit thanks for doing it.

Andrew, this exhaust clamp at 4:23 is the best. I saw it on your channel 3 years ago and then recently I had my exhaust break on my van. It broke at a flange coupling. I cut off the ubolt and accidentally put an additional cut in the pipe. I got a two pack of the clamps off amazon and used one to join the pipes together and one to patch the accidental cut. now my van with 244K miles is running quiet again. I just need to keep it together for another year and I am gold. Thanks for sharing these maintenance tips. It saved me hundred s of dollars.

Grease nipples should always be cleaned of dirt before attaching the grease gun, if you dont you just pump dirt right into the device. Batteries only have 2 rules for peak performance, Clean and Dry also remove any plastic labels between the two posts, they just help make paths for voltage leaks. Thanks for all the great videos.

Hi Mr. Camarata, you have a subcriber from The Netherlands, i like your vids, keep up the good work!

Another great video Andrew, I enjoy watching your repair jobs and can relate to your way of thinking as I'm sure most of your subscribers do. I'd love to have a garage like yours and space to have an area with a lift, they do make things so much easier. But lying under a car on the main road in the cold and rain is ok too 😂 i call it character building. Keep up the repair vids.

Same here on high temp paint suggestion. Cheap and won't hurt to try it. Good job on exhaust repair.I'm working on a 99 Ford F-250 with the 7.3 diesel. Texas truck with no rust at all. Strong 9.5 out of a 10 with 117K miles on it. Did all mechanical upgrades and just finished patching gooseneck hitch hole in bed and had spray in liner installed. Waiting on the Leer camper topper for it then will turn it into a 3 season weekend camper.

Good oll down to earth good dude.

posted 1 hour ago and already 44 comments, man people love your videos

@denniswinspear7478

4 жыл бұрын

He is a free thinker, he is not a conformist. It is what attracts people to him. It's what all of us wish to be - unconfined thinkers. Most people are brainwashed zombies from the corrupt school system of controlled, confined beliefs. He somehow went through this system unaffected by the brainwashing? It is an attractive quality that others only hope to emulate.

Great video I like how they build the H1 they have aluminum bodies independent suspension all the way around and older diesel motors that are efficient as far as I know they are designed to be wide enough to follow the army tank tracks as part of a convoy. Their transmission and transfer case are higher up in between the driver and passenger seats so they have good ground clearance.

You do just great, keep it all going as needed. Great videos always..

Hey man love ur vids. One trick to get that inside cutoff piece out of your muffler pipe is to use a sawzall and just slowly cut a line on the inside pipe until you can loosen or bend it away from the outside pipe.

@AndrewCamarata

5 жыл бұрын

That's a good idea. Thanks.

@dennisfahlstrom1257

5 жыл бұрын

Andrew Camarata I’ve tried that idea with the sawzall and in that instance it didn’t work because the inner sleeve was rusted in place. I suspect that will be the case most of the time. If there is room, just make the cut behind the sleeve piece. I do enjoy your videos, your dogs (I’ve got 3 labs myself) and that handy lift. Keep these great videos coming. BTW, I thought the soil in my area was rocky - your area looks much worse.

@CorMorse

5 жыл бұрын

If you cut through the inside layer and it doesnt move, make more relief cuts. Turn it into a pizza. Believe me it works, if you just keep attacking it with more cuts.

@steverone7623

5 жыл бұрын

Collapsing it from the inside works well

next time buy walker exhaust and they have a liftime warranty on rusting out! i know i live in michigan!

@tiffanyssilkynylonlovelysi6233

3 жыл бұрын

For the next time, buy a Walker exhaust system and they have a lifetime warranty on rusting out!! I know that I always live in Georgia!!

just replaced the muffler and some pippe on my 2009 jeep grand and did the same exact thing butting up pipes and using that stainless clamp. not as experienced as you but cool to see you used at least 4 of them. love this channel. grew up in warren county ny until i was in my 30s and ive been out in California for 5 years. its way different out here and this channel reminds me of home.

I enjoy every video you do..I always hope for more of the chain saw to the dash clips. Keep up the videos. Great job

Work trucks don't need to be good looking, it just has to work.

@toqulac8862

5 жыл бұрын

That’s true they don’t, but some people notice when an excavation company rolls up with all old, rusting or noisy equipment it might make them look bad. A company should be judged on the quality and longevity of their work but that’s just not how customers think sometimes

@MookieMan1

5 жыл бұрын

On the flip side, you see someone roll up in a truck that’s not taken care of, the customer may think “If he can’t take care of his OWN shit, he definitely will not take care of MiNE”

@NubarTrebor

5 жыл бұрын

A dirty running truck will get you further and make you more money than an emmaculate body on a broken, non-running truck.

@steve5912

4 жыл бұрын

@@MookieMan1 Yup

@braydenw3381

4 жыл бұрын

@Brown Turd "if they didn't take a break" people deserve breaks man you cant just do manual labor all day and not at least stop and eat some shit for 10 minutes

I've got a 2000 Chevy Tahoe that the break lines rusted out and ended up crashing. Thankfully it happened at a low speed. I went thru and changed out all the brake lines with stainless which I got shockingly cheap. Like 60 bucks for the whole kit. I couldn't figure out why it was so cheap. Then I did some googlin' and turns out there was a class action lawsuit about the brake lines rusting out. Instead of recalling all the effected trucks they said they'll just sell the stainless kit at cost. Which if you ask me is screwed up. How some of these auto company guys can sleep at night be beyond me. Great vid as always, Jay

@othmanalghamdi9736

5 жыл бұрын

they have German cars ! they don't care about anything, they sailfish and sleep comfortably in their palaces ..

Thanks for the experience sharing. Been down the same road as you on many points - had to replace all the brake lines on my 99 ram 1500 and used nickel copper. Good stuff. Had one of the gas tank straps rust through on it and fabbed a new one from galvanized sheet steel. Have oil consumption but forgot about (I think I had it replaced once before so didn't suspect it was that) the plenum gasket so will check to see if that is what it is. I would love it if it was because a tree just fell on it too and I wanted to keep it because it is pretty good otherwise for its age. So, if just a plenum vs valve guide or rings, then I probably will keep it and due to it being relatively good compared to other trucks from your and other's experiences.

Wow, as always, very exited about your projects. Looks awesome and great job. Thanks

Good morning Andrew my dude. A welded up system is the best way to go.

@hondaguy425able

4 жыл бұрын

I agree I was really surprised he didnt pull out the welder.

@ryancmoore3000

3 жыл бұрын

Agreed. He's a decent welder. He could easily handle that.

Dude you’re really smart, you know a bit about everything. Great channel.

Your Levi and my Bella look like twins and act the same. My lab just turned 12 back in February. Love the videos and the fact your kids/dogs get to always come along. My Bella gets the same.

I am with you on getting more than you think you will need.. My dad was a HUGE DIY shop guy, harped on having extras all the time. Cheaper to get extra than loose time going for more later. Great job.. Its amazing how much damage salt does to vehicles.. Out here in Oregon, we have such little snow outside the mountains there is no salt needed. 20 or 30 years is nothing for a decent vehicle out here. Adding the cost of shorter vehicle life is part of the cost of living in snow country. It sure helps to be able to fix it yourself.

Forget about the H1, they are very expensive to repair and very complex systems to repair !! you have to keep in mind that they were government / military pocket books so money was not an issue in cost or time to do repairs !!!!!!!

@howardfortyfive9676

4 жыл бұрын

Which translates to *stick it to the TAXPAYER......*

Andrew, I agree 100%. There is no reason a car/truck should rot out so quick and I also have had the misfortune of replacing my brake lines with the copper rolls. They just don't care. I live in Ct where it seems they are using acid for road salt ! Levi is awesome !!

@SalandFindles

5 жыл бұрын

+august LOL! Acid? 🤣

@dustin1203

5 жыл бұрын

kzread.info/dash/bejne/hGqrzcWynM2Xnso.html THE BEST and cheapest rust prevention on the market (DIY)... watch this how to...

Always Educational and we appreciate your values on Trucks,Keep up the super work and Comments.CHEERS. Most trucks are over priced. Thanks sir.

Your resourcefulness amazes me. Funny thing with exhaust systems. It seems up until the 90’s, partial replacements every few years were the norm, Now, it seems they last as long as the vehicles themselves.

Best part of this video is seeing Levi in the armchair 😁

Andrew love the video!!!!!!! Hey is that Levi chair ??????? Nice shot. Of him seating in the chair. Your right the two post lift. Is the bombs!!!!!!!!!!!!! for working on anything under the truck. Just did a muffler and tail pipe. On my 1980 Ford f-100 with 200. Plus miles. Second motor and transmission What a real pain in the ass. With No lift,,,,,,, my. F-100 look like your dodge. But it still starts and goes,,,,, all new brake line. Shoes pads. New.master cylinder just. Put in a new distributor what a real pain in the ass that was the older the truck easy there are to work on. Just pick up another old Ford. 1980 4x4 3/4 ton. Looking at 1989 Ford F-350 4x4 dump. Next!!!!!!!! Hey. When you pick up your dodge I was waiting for either the front end or to see the truck fall apart . But it didn't. I was surprised 😳 I real think you should look for dual rear wheel unity body truck for all your tools with you. And you cement. Boots too take care. JUNKMANDO

You remind me of my childhood in NY. My dad retired to a farm in Almond after working at GM in Tonawanda. He had an old rust bucket 1968 Impala. The car was loaded with me, wife and kid in the back and dad slammed on the brakes for a school bus and the break line blew out. No accident and he limped the car to the next small town to find a garage open to repair the line. Looks like your dog is handy for wiping off your greasy hands on as his white fur is pretty dark on the back of the head and neck...lol I enjoy your content and reliving my past...

Andrew!!! Amen! Never pay up for something that will eventually be driven to -0-. Fix, prolong, and don't worry about the Vehicle. Keep it Safe, and stop every "issue" asap!

they do it to keep dealerships in business with repairs, and keep selling spare parts for 20 years after. which is where they really make their profits

I agree on the synthetic oil. Put it in my 2008 f250 and motor started clattering and burned a quart in about 800 miles. I’m sure it’s fine in brand new cars with everything tight but not in old trucks.

@alleycatvietnam

5 жыл бұрын

If your engine is using regular oil and then your go to syn oil you are most likely going to have problems your engine has been run into that regular oil and syn has a much thinner viscosity than regular oil. Therein lies the problem.

@rustyoldjunk

5 жыл бұрын

Yup but you would think 5w20 is 5w20 no matter what it is. But that’s not thecase

@alleycatvietnam

5 жыл бұрын

@@rustyoldjunk Mike this article might help explain the differences manufacturing process between syn and regular oil. Motor oils, and most lubricants in general, are composed of base oils and additives. Discussion of “synthetic” or “conventional” relates only to the base oils in the lubricant. Conventional base oils are made from crude oil/petroleum and occasionally re-refine used oil. Synthetic base oils are made from petroleum, hydrocarbon gases, and alcohols. Ultimately, all lubricant base oils are hydrocarbon molecules; the processes by which the synthetic base oils are made is what sets them apart from conventional base oils. The advantages of synthetic base oils are thanks to the extreme cleanliness and consistency of the molecular structure achieved in the processing. Conventional base oils are typically only lightly refined, with not all of the inherent impurities (waxes, sulfur, etc.) removed from the petroleum. Instead of being simply refined, the crude for synthetic oil is engineered to produce a uniform molecular structure that offers superior lubrication. Finally, proprietary additives are introduced to make full synthetic oil even better.

@rustyoldjunk

5 жыл бұрын

John Dubpernell wow cool thanks

@alleycatvietnam

5 жыл бұрын

@@rustyoldjunk Your Welcome, Cheers from San Francisco.

I love this guy he's a hard working "good as new" dude

You can use a pipe expander to stretch the pipe to allow slip in. I love to a half of the repair items you got. You did good.

Humvees are too wide and unpractical for your activities,like snowplowing,narrow roads you work on etc... You can spray used diesel engine oil on the frame,and inner panels for rust protection. Soot makes it sticky.

I can get you that transmission for a shipping fee. My buddy owns a recycling company and has thousands of engines and transmissions. If you get me the numbers off yours, I'll find a replacement to swap. He really just needs the cores. So yours being broken has no effect on price.

@AndrewCamarata

5 жыл бұрын

Ok, ill check it out later for numbers. Its a 1989 Dodge raider with the 2.6 four cylinder.

@eddygoodwin7089

5 жыл бұрын

Too bad you can rig up an undercarriage wash to rinse all the salt brine off in the winter time. Just a steel pipe with pressure washer nozzles tapped into it

@psidvicious

5 жыл бұрын

Eddy - That’s a great idea. Andrew, you should try to rig something up like that. Who knows, if it goes well maybe you could get a patent on it ($$$). Sounds like that’s a big problem up there. I live in So. Fla and problems with rusted out undercarriage, brake lines, etc are virtually unheard of. When I put my ‘06 Dodge up on a lift, aside from the surface dirt, it’s virtually brand new. I’ve never had to replace anything on the undercarriage. 185K miles.

@tiredoldmechanic1791

5 жыл бұрын

If you could do it at home as you drive into your garage it might work if you could dry it immediately. The minute you hit a roadway, there will be more salt on it.

@DieselRamcharger

5 жыл бұрын

Dodge Raider is a Mitsubishi Montero. its a DSM {diamond star motors} a collaboration between dodge and mitsubishi in the 80s and 90s. it'll be a lot easier to find a monty tranny than a raider one....

Andrew you live in New York, the salt on the road destroys all vehicles, you are not the only one with these rust problems, all mechanics deal with this everyday. I'm from NJ and now I live in Florida, I have no rust on my vehicle now, they last a lot longer. Love your Videos, keep them coming.

Andrew, your spot on and keep videos coming.

You should go online and actually look they make stainless steel exhaust kits for those trucks and it's probably cheaper than buying everything from the auto parts store

I love having my morning coffee with Andrew, Levi must still be resting LOL

@michael7423

5 жыл бұрын

the only reason it looks so rough is the salt used on the roads, and if it works don't fix it LOL its a real working mans truck not a show truck!

@michael7423

5 жыл бұрын

oops i spoke to soon Levi always there to inspect when the time is rite

Thanks for sharing. I’ve had the similar thoughts as to why no one is building a reliable, utilitarian, no-frills vehicle. Would make an amazing build series to make your own. Use one of those new Cummins crate engines and build everything in the truck to last 100 years.

Andrew, where you live looks like a slice of heaven, but jesus, between all the snow and rust, no thank you. My two stompin' grounds are LA and Phoenix, and cars here literally will last forever. The frame and body on my 97' Mitsubishi Montero SR is flawless and it's 22 years old with 240,000 miles. Still, the more I watch your videos, the more I wished i lived where you are. I came to your channel for the Montero brake change video and now I'm binge watching all the rest. As many other state, I think this is one of the best on all of youtube. Cheers, Mate

Transfer your radio! Haha

@andy72xbox

5 жыл бұрын

he'll cut it out of the the cab with jaws of life or something.

@inthewoods5640

5 жыл бұрын

Perfect that would make an awesome video !

well there's your problem Andrew, you are using stainless steel clamps to hold carbon-steel piping/tubing, this will act as a cathodic which will corrode your carbon steel piping way more quicker. especially in wet conditions thats why your exhaust life is only two years.

@MBdrummer3288

5 жыл бұрын

Is that really the case? I know nothing about “cathodic” situations!

Levi Chillin on the recliner ,I love it!

Love watching yer vids. you're actually a great filmer! Anyways, I have the exact same Dodge Ram work truck so obviously dig those vids. But honestly, love 'em all including Levi and the gang! Keep it up.

Just wrap some bacon over the holes and take a drive. MMMM BACON. Thanks for the shows.

Should have painted them with high temp paint. They will last longer as the salt wont contact the metal.

@POLOLOUS3

5 жыл бұрын

Won't make a difference, it's not the salt, it's the condensation inside from the exhaust. Oem replacement exhausts rust out faster than what came on the truck new.

@eraldorh

5 жыл бұрын

+POLOLOUS3 Condensation inside the exhaust does not rust it out that fast, its the salt. That should be obvious since we know exactly what salt does to metal and he showed the bottom of the car caked in salt in the previous video.

@leocurious9919

5 жыл бұрын

How could condensation inside the pipe rust it all around on the outside? ;)

yes, YES, yes, Yauza, Yauza,Yauza! Almost 25 minutes! thank you Andrew!

That hoist is a great 'tool' to have in your garage Andrew,...I bought one too, ( a four post model ) and in the winter I store my ( toy ) 'summer' car on it, raised up to full height then block it there for secure storage out of the way.

Andrew, this was one of the most enjoyable videos you have put out to date. I would love to sit down with you and talk trucks, I have had 8 Fords since I was 16 and worked on every damn one of them.I will say they are ALL crap, Ford, Dodge & Chevy (especially) I stick with the fords as I feel they have the best frames and I always like the 7.3 diesel engine. I do disagree with you on the diesels and its because for what you and I do (towing/hauling) the diesel kicks the crap out of any gas engine for torque and fuel mileage. They also last twice as long as gas engines and have less components to go wrong i.e spark plugs wires distributor cap etc. You are spot on with those damn steel brake lines, those things are complete garbage and just like you said I had one let loose when pulling my boat off the ramp (on a date no less) and when I was in the parking lot by some stroke of luck my mechanic buddy just so happened to show up to go fishing and had enough tools to help me crimp the end so I could nurse it to a gas station and pick up some fluid to get it home. You also mentioned the Toyotas, my best friend in Rhode Island just got his whole damn frame replaced from the factory as it had a recall on it. There's a name for all this Andrew, its called "designed obsolescence" The car companies do it for a reason, its all about keeping you buying their crap so they can stay in business. As far as that train you are rebuilding, call around the junk yards and see if you can find one, when you do work out a deal for it as often times they will come down in price to move it. If you get stuck I'm sure I can find you one here in CT and drop it off on my way to my parents place in NY...Dave

I have a 2007 Toyota Tundra 5.7L not any rust they just did a frame inspection for free. They just do not build things like they did in the 50's

@ratj4715

5 жыл бұрын

old time engineer The frames on Toyota were rusting in half. Happen to a friend.

Another great video and it doesn't matter what the subject, there all good. Thanks, Andrew

I really appreciate your attitude to old work trucks, we cannot do that stuff in the UK our yearly inspections are getting stricter and stricter

@charlesmiller5078

5 жыл бұрын

Gotta pay for that World Class Health Care somehow. Car inspections have not been needed for along time, If your State or Country stills demands this, its for the money only. They have to line their pockets somehow.

@CrimeVid

5 жыл бұрын

Charles Miller I would like you to justify that remark about not needing yearly inspections any more ! from what I can see of it people will drive anything that will move,dangerous or not.

Dude, you don't want a HumVee. It would be cool, but only for off-road, you might not even be able to get it road legal. When I looked at one, they didn't have keys and seemed REALLY underpowered when I tested it out, it had the GM diesel.

@andrewstratton7095

5 жыл бұрын

Ya those 6.5s are slow and meant for fuel economy. Their not really a powerhouse diesel.

@steverone7623

5 жыл бұрын

They are usually a naturally aspirated 6.2 diesel they claimed 300ftlb torque but they are known to be slow as molasses. The 6.5 has a turbo

@robobiss444

5 жыл бұрын

Yeah they're junk. Drove them for a living at one point. Wouldnt buy one with a gun to my head. Very capable vehicles for sure but couldnt be much more unreliable

If you mix Stainless Steel, Galvanized Steel, and salt water you will get galvanic corrosion.

@robstone370

5 жыл бұрын

The metals can easily be coated or the use of insulating shins, spacers, washers etc etc, which eliminates metal to metal contact and prevent any corrosion, there is no problems at all with using different type metals together if built properly.

Somehow I ended up on this channel , now I can't stop watching, he knows how to fix anything

I'm so happy I moved to Texas from Minnesota, vehicles last so much longer down here than up north. Those winters and salty slush from roads that stays on your vehicle for months kills them.

buy a truck from Texas I've got a 2005 suburban 275000 miles not a spot of rust.

@Kilolocks

5 жыл бұрын

As long as it wasn't flooded in Houston.

American Auto companies dont have pride in there product anymore its all about how much profit they can get, American made used to be the standard world wide WTF happened America, Andrew Camarata for president!!!!!!! Levi Camarata Inspector general!!!!!!!

@gavincrawford929

5 жыл бұрын

michael it's British made which is the standard.America has and.will always be lagging behind the brits

@michael7423

5 жыл бұрын

lets just agree to disagree, LOL

@xcalibertrekker6693

5 жыл бұрын

So have European and Japanese cars with all the scandals the last few years. No one cares about making quality vehicles anymore its money, money, and more money.

@MrRay3801

5 жыл бұрын

Sadly it's just simple economics. As a product is put out and competitors enter the market place it's always a race to put out the cheapest product and grab the lions share of the customer base. Then the competitors want to compete so they release a product at a cheaper price point....and so and so on. People vote with their money....if the quality higher priced products sold then that's what we would see. But the reality is the majority of people want cheap so we see cheap. It sucks but we are to blame....myself included.

@DieselRamcharger

5 жыл бұрын

no such thing as american auto companies anymore. they are all global manufacturers.

You right brother, trucks are fun to work on I miss working on my 86 chevy Silverado mine had the dual fuel tanks I miss those too I take good care of my truck it will last a long time

12:55. Levi in the recliner. Legendery!!!! 👍👍

When is Elon Musk going to call you about making the electric Camarata (Levi Edition) truck ? Why did you put synthetic oilin the truck in the first place ? When are you and Levi going to the mountains and find the airplane crash video ? What did you have for breakfast ? Have you ever tried some Bullet Proof coffee ? No drone filming and some music this morning ? :-(

@AndrewCamarata

5 жыл бұрын

IDk, haven't gotten the call yet, lol. I should try to get up there this winter.

I hope you replaced the muffler bearing also

I'm still hung up on the undercarriage wash so it would just be something you drive over that stays in place and could be turned on easy and drained easy just food for thought your the man Andrew

Great vid and I agree with you on the rust thing. I have a 05 Liberty since new with 100K that I love and the front susp. is totally rusted . Spent 7 winters in FL. MA the rest of the time . I don't drive it much you'd think it would last longer.

H1s are way too complicated to work on. Look up the brake system and portal axle systems on them. Not worth it.

@ckm-mkc

5 жыл бұрын

Can't be any worse that working on heavy machinery that runs on hydraulics....

@johndowe7003

5 жыл бұрын

atleast its a GM xD

I am 59 years old and have had nothing but trucks all my life. I used them for work and comuting. I have had Chevy, Ford and Dodge trucks and had nothing but trouble with all of them. Two of them I bought brand new. My brand new 1989 Chevy 3/4 ton2 w drive was the worst. I was buying a new truck every 2 to 4 years because of major brake downs. I can't say enough bad things about them so I stop here. I am real good to my trucks, oil changes routine maintenance, preventative maintenance, etc. In 2003 I bought a 2004 Nissan Titan out of fustraton, (i wanted to buy american) now, 15 years later, I have 180,000 miles on it. The only thing that has any wear is the driver's seat. It has never left me on the side of the road. I do routine maintenance, oil, tires, etc. When I get to 200,000 miles I am going to buy another Nissan Titan. Mabe you should give Nissan a try. There standared 1/2 ton Nissan truck is rater higer in towing and carring capacity than most of the three big american companies 3/4 ton trucks at least that was the case in 2004.

Agreed on the blend of the metal, remember Fiat in the late 70s, the bought steel from USSR, contaminated with too much copper, the Alfa models that were made out of that steel rusted instantly in the dealers showroom... These band clamps, nice parts, never seen them here in europe! Thx for the vid! ;-)

I got to hand it to you Andrew your a bludy hard grafter certainly not afraid of work well done I really enjoy your videos mainly repairing work nothing you don’t have a good shot at hi to your Dad. Greetings from Ireland 🇮🇪

@MidnightPolaris800

5 ай бұрын

wats bludy