Where is the connector? If you can't come out to show properly then better to stay in the heating. Waste of time 😠
@fgajtani5 жыл бұрын
For the rear sensor you just take a screwdriver and lightly apply pressure to pop off. I didn't know how to remove anything after that though.
@angrygreek19852 жыл бұрын
I got this code and was able to scan as well. Mine is rear right. I took it all apart and cleaned it all out with brake cleaner best I could and put it back all together and it's still there. Didn't fix. :(
@juanc.19624 жыл бұрын
how to fix?
@nebhosspin1252 Жыл бұрын
Why he didn't do it?
@samiahamdi37714 жыл бұрын
U roung bro
@fredgerrior63543 жыл бұрын
Just cleaning didn't work...I had to get parts replaced and ultimately that cost me $600 parts and labour.
@GreenMan1986x
3 жыл бұрын
Mine cost $800CDN. Toyota Yaris 2007 made in Japan. Our mechanic also disabled the handbrake for some reason I can't remember. Seems like a common problem with these cars but not a big issue. The ABS isn't that great on snow or ice anyway. Now the ABS and Handbrake light come on. If it's expensive to repair I will just disable the ABS.
@angrygreek1985
2 жыл бұрын
@@GreenMan1986x I'm probably going to have to do this too and I am not happy. I need to bring my car to a different province so need to do a out of province inspection and apparently it won't pass with this code throwing
@stevenhughes38382 жыл бұрын
Wong I information for code co210
@fredgerrior63545 жыл бұрын
The video is useless! He just tells you what is wrong. I still don't know how to do it!
@zloben9000
5 жыл бұрын
just remove the ABS plugs from the rear hubs and clean them ... simple !!
@fredgerrior6354
5 жыл бұрын
@@zloben9000Simple for you but you are just verbally telling people how to to do it. Good instructions SHOW the procedure being done for people like me who don't know that much. Thanks anyway. (I had my mechanic look at it and he did clean the connectors and all that you were talking about but the light is still on...obviously, for me, the problem is more complex.)
Пікірлер: 18
Thank You very much! Fixed my Toyota problem!
Where is the connector? If you can't come out to show properly then better to stay in the heating. Waste of time 😠
For the rear sensor you just take a screwdriver and lightly apply pressure to pop off. I didn't know how to remove anything after that though.
I got this code and was able to scan as well. Mine is rear right. I took it all apart and cleaned it all out with brake cleaner best I could and put it back all together and it's still there. Didn't fix. :(
how to fix?
Why he didn't do it?
U roung bro
Just cleaning didn't work...I had to get parts replaced and ultimately that cost me $600 parts and labour.
@GreenMan1986x
3 жыл бұрын
Mine cost $800CDN. Toyota Yaris 2007 made in Japan. Our mechanic also disabled the handbrake for some reason I can't remember. Seems like a common problem with these cars but not a big issue. The ABS isn't that great on snow or ice anyway. Now the ABS and Handbrake light come on. If it's expensive to repair I will just disable the ABS.
@angrygreek1985
2 жыл бұрын
@@GreenMan1986x I'm probably going to have to do this too and I am not happy. I need to bring my car to a different province so need to do a out of province inspection and apparently it won't pass with this code throwing
Wong I information for code co210
The video is useless! He just tells you what is wrong. I still don't know how to do it!
@zloben9000
5 жыл бұрын
just remove the ABS plugs from the rear hubs and clean them ... simple !!
@fredgerrior6354
5 жыл бұрын
@@zloben9000Simple for you but you are just verbally telling people how to to do it. Good instructions SHOW the procedure being done for people like me who don't know that much. Thanks anyway. (I had my mechanic look at it and he did clean the connectors and all that you were talking about but the light is still on...obviously, for me, the problem is more complex.)
@dvt1363
3 жыл бұрын
What ended up being the problem for you
Terrible.
@jasongillblox
3 жыл бұрын
Exactly what you are😌