Fix Your Fishing Reel Anti Reverse Clutch With This Simple Fix!
Dave fixes an ar clutch which is s common problem on fishing reels.
Жүктеу.....
Пікірлер: 14
@eseryener689611 ай бұрын
I was about to go crazy until I realized the problem. Bless your hands. Thank you very much. 🙏🧿
@keithharris3190 Жыл бұрын
Nice one fella, just fixed my abu cardinal 104 in half hour, been plaguing me for ages. Thanks for posting
@seantuck5422 жыл бұрын
I have an Okuma Stratus iv baitcasting reel that seems to have the same problem. Never thought to epoxy it... I'll have to watch a few more times to know what to try... thanks!
@avianfish8732
2 жыл бұрын
Ok I forgot to mention, score the inner surfaces with something to give the glue some grip. D
@GuySasha20229 ай бұрын
I super glued my brass piece to casing worked great.
@avianfish8732
9 ай бұрын
A lot of people have said 'It wont last' but I am still using it, it still works.
@GuySasha2022
9 ай бұрын
So did mine
@jimcatanzaro78082 жыл бұрын
I don’t see how long that will last Better off getting a upgraded replacement most manufacturers will send you the part for a small fee or just send it to you That’s been my case in the past
@BuboyTheGreat Жыл бұрын
I seem to have the same problem
@avianfish8732
Жыл бұрын
Ok make sure its the right way up. D
@BuboyTheGreat
Жыл бұрын
I think mine broke because of the grease i applied. I cleaned it up and it seems to be working fine now. Do you agree?
@avianfish8732
Жыл бұрын
@@BuboyTheGreat As long as it is not separated. Dissolve grease with white spirit. Probably should be oiled. Grease is generally for slow moving sliding parts. Use a low residue synthetic reel oil.(Penn gtx40).
Пікірлер: 14
I was about to go crazy until I realized the problem. Bless your hands. Thank you very much. 🙏🧿
Nice one fella, just fixed my abu cardinal 104 in half hour, been plaguing me for ages. Thanks for posting
I have an Okuma Stratus iv baitcasting reel that seems to have the same problem. Never thought to epoxy it... I'll have to watch a few more times to know what to try... thanks!
@avianfish8732
2 жыл бұрын
Ok I forgot to mention, score the inner surfaces with something to give the glue some grip. D
I super glued my brass piece to casing worked great.
@avianfish8732
9 ай бұрын
A lot of people have said 'It wont last' but I am still using it, it still works.
@GuySasha2022
9 ай бұрын
So did mine
I don’t see how long that will last Better off getting a upgraded replacement most manufacturers will send you the part for a small fee or just send it to you That’s been my case in the past
I seem to have the same problem
@avianfish8732
Жыл бұрын
Ok make sure its the right way up. D
@BuboyTheGreat
Жыл бұрын
I think mine broke because of the grease i applied. I cleaned it up and it seems to be working fine now. Do you agree?
@avianfish8732
Жыл бұрын
@@BuboyTheGreat As long as it is not separated. Dissolve grease with white spirit. Probably should be oiled. Grease is generally for slow moving sliding parts. Use a low residue synthetic reel oil.(Penn gtx40).
@BuboyTheGreat
Жыл бұрын
@@avianfish8732 thanks for this bro!
good job, what type of epoxy?