Great video, Thank you. I too have small hands and will be ordering the the smaller grip frame.

@yrsued

11 ай бұрын

Ya, it feels so much better for me with the Small Frame and the Small Backstrap!!

I followed your video 100% and it works when I first got it. I was struggling with just about everything. I’m glad you made a video that was very detailed. There aren’t that many videos out there that can show you how to take this thing down without putting muscle into it. Thank you for all the information you should do a video on the different red dot pins

@yrsued

11 ай бұрын

We tried to make our Video easy to follow, Marty is a Great Gunsmith and he knows how to describe the process!!

@TheHounddog2343

6 ай бұрын

Didn’t have to remove the back strap. Watched other videos as well. Brand new, you need a flat head screw driver to elevate the FCU, fire control unit out of the grip frame. Also, had to squeeze the trigger to get the take down lever to go in all the way. Have to squeeze the trigger to rotate the take down lever all the way before removing the slide. Disappointed that the back straps are not labeled. Should be labeled with S, M, and L. Instead the smallest is labeled 1, the medium is labeled 2, and the large is labeled 2. At least label them 1a, 1b, and 1c like in the parts diagram. Otherwise, this is a well designed pistol. Waiting for my small grip frame module to arrive in the mail.

One thing I wish they did with this gun is label the grip sizes like how smith & wesson does.

@yrsued

11 ай бұрын

They are labeled, it's just VERY, VERY small in the back bottom

All the grips are very slim. I have the large grip and still want more. I'm not some monster, but good god the Echelon grips are thin and make for a very short reach for the trigger.

@yrsued

11 ай бұрын

Ya, I get what you say. So, you got the Large Frame with the Large Backstrap?? Camera Man Dave is a HUGE guy too, he needs that setup!!

Can you give any further insight into the small grip frame dimensions? More specifically, I'm curious if the area between the beavertail and the backstrap is narrower than on the medium module. That area causes discomfort on my thumb joint when shooting & wondering if the small module would solve my problem

@yrsued

11 ай бұрын

It's very hard for me to describe, I found the medium grip to be OK, but when I changed it to the smaller grip and the small back strap, it felt so much better!!

@iamTkzs

3 ай бұрын

I've got smaller hands and had the same issue. Just plaved my order for the small frame and I'll swap the small backstrap I've been using on it

You don't have to take the disassembly lever (aka takedown lever) out if you only want to swap the Backstrap.

@yrsued

3 күн бұрын

Yes you do!! You have to take the back strap off, then take the serialized part off and the ONLY way you can do that is to remove the slide, if you found a better way than the factory, please feel free to make a video.because you seem to be smarter than HS Produkt, maybe you should move to Croatia and take over the company.

@Merry_Otter

3 күн бұрын

1:45 ​@@yrsued I watched the video while I was removing the backstrap without removing the pin. The only reason to remove the pin is to swap to a whole different frame. Chill with the snippy attacks. Sheesh.

@yrsued

3 күн бұрын

@@Merry_Otter First, the pin is part of the back strap, you DO NOT remove the pin, second, you want to to ask a question, ask it, you don't want to be corrected, learn not to make false statements as facts BEFORE knowing the facts!! This Video was done with help from the Springfield Armory Staff, we didn't pull this our of our rear ends, we do research before talking, maybe you should learn to do the same!!

@Merry_Otter

3 күн бұрын

​​@@yrsuedI just bought the Echelon yesterday. Found this video when I was ready to try out the different backstrapsthat came in the box. I removed the slide pin as the video instructed. Then I figured out that was not necessary when just replacing the backstrap. So a 30 second task turned into a 5 minute job of getting the disassembly lever back in. The video does a great job of explaining how to get the lever back in and that it can be a little difficult. If the video had covered only swapping the backstrap first it would have been awesome. I corrected my original post because I used the word "grip" instead of "backstrap". I didn't have a question. I had a 100% factual statement based on my experience using the video: The slide pin does not need to be removed if you're only replacing the backstrap. Not trying to be a jerk or give false info. Video is spot on for replacing the entire FRAME.

@yrsued

3 күн бұрын

@@Merry_Otter Slide Pin?? What is a Slide Pin??? There is NO SUCH THING as a Slide Pin!!! DO you mean Takedown Lever?? IF you carefully watch the video instead of telling us that we're doing it wrong, you might learn something. I think you're better off going to a qualified Gunsmith that knows how to take these things apart. It is OK not to know things. Have someone teach you

How does the small frame and the small backstrap compare to a Glock 19?

@yrsued

5 ай бұрын

Depends on which Generation of Glock 19, they are all different.

@eliteprotegy

5 ай бұрын

@@yrsued Gen 4

@yrsued

5 ай бұрын

@@eliteprotegy Small Frame with the Small Backstrap is what I use now, much smaller than the G19 Gen4

more dissembly than fit to hand???

Is the beavertail longer on the large frame? I got slide bite from shooting the smaller frame grip module.

@yrsued

11 ай бұрын

NO, that might end up being a custom Mod. Hey, that might be something Wilson might make!! How did you get slide Bite, I thought I gripped very high and I never did.

@a.d.c7941

11 ай бұрын

@@yrsued man I have very big hands. And they are beefy. It bit me in the same exact spot that a Glock gets me at. And I mean same exact spot. I was told by an editor that springfield said the large grip module has a lil longer of a beaver tail. But I have not seen it. You have seen it and confirmed that its not any longer?

@yrsued

11 ай бұрын

@@a.d.c7941 You must have hands like Dave, the camera guy, but he's 6'6" 300 Lbs, the only pistol that looks normal on him is the Desert Eagle .50. I have not see the large Grip, but I ordered one for Dave!!

@a.d.c7941

11 ай бұрын

@@yrsued 😂😂😂 I do have some mits. Can you please let me know if you notice a difference in the beaver tail when u get it?

@yrsued

11 ай бұрын

@@a.d.c7941 I will definitely do that!

Yamill you ok?

@yrsued

Жыл бұрын

You mean my weight?? Ya, all good, I was diagnosed as a Type 2 Diabetic last September 11, I went on a Diet that same day, No more Carbs, no more Sugar!! Lost almost 50 Lbs and I'm healthy!!

Wtf it just sais 2 mon

@yrsued

Жыл бұрын

??? OK, you lost me there!!