In this episode we will go through a few points to remember when fitting a staircase, show you the finished product and a brief chat about what's next for us.
Жүктеу.....
Пікірлер: 30
@leeechee5 ай бұрын
4:13 "it's a bit steep" 🤣🤣🤣 comic genius 👏👏👏
@MelbourneAlan Жыл бұрын
im loving mick , he is a howl. i love the running joke of morning mick
@MMG_MoonManGuitar2 жыл бұрын
Love watching you pair!!! Solid work as always gents!
@mrabuilders6723
2 жыл бұрын
Thanks MMG. Glad you enjoyed the video and taking time to comment.
@LTFC1964 Жыл бұрын
Blimey that would have given me a heart attack putting that in; you made that look a lot easier than undoubtedly it was not. Lovely work.
@michaelbolt4530 Жыл бұрын
Fascinating stuff again
@mrabuilders6723
Жыл бұрын
Thanks Michael appreciate the comment 👍🏻
@boabmarlee Жыл бұрын
Great video lads 👍
@TheNorthernmunky2 жыл бұрын
Great job, team work makes the dream work
@mrabuilders6723
2 жыл бұрын
It does indeed Logan and we are lucky to have a very good one cheers mate 👍🏻
@soniadennis7801 Жыл бұрын
Hair doesn't make the man! Don't let them pick on ya! Your a very clever guy!!!!!
@the_judge_8262 Жыл бұрын
Top job lads 👍🏼 think you did right not adding the rabbit s to Rich's head 😛
@cempijonas1 Жыл бұрын
Good job lad’s keep going good content!👍
@mrabuilders6723
Жыл бұрын
Thanks Darius there’s plenty more episodes for you to watch since this one hope you enjoy the rest of the series 👍🏻
@Skilledcarpenter2 жыл бұрын
I always make to top section of stairs first (kite winders newel etc )then simply push the bottom section up to it and fix the 2 together
@mrabuilders6723
2 жыл бұрын
Sounds like a good method Tony. As I said in the video when you don’t do it regularly it all takes a lot longer. I’ll remember that method of yours for next time. Thanks for commenting mate 👍🏻
@Skilledcarpenter
2 жыл бұрын
@@mrabuilders6723 fitted over 40 double winders on a development so big learning curve for me , but I found makeing the top section 1st made the job a little easier 👍
@mrabuilders6723
2 жыл бұрын
Awesome cheers Tony
@billybulmer73862 жыл бұрын
Really interesting video. What is the advantage to buying a readymade staircase rather than making it yourselves? Is it time or cost?
@mrabuilders6723
2 жыл бұрын
Hi Billy it’s very much both. Although the team are more than capable of making joinery there just isn’t any need when you can pay what we did for this staircase and have it all delivered in kit form to be installed. Plus my workshop became a bar four years ago 😁thanks for commenting Billy 👍🏻
@dermotkelly6946 Жыл бұрын
Would it be possible to assemble the whole stairs in the loft and screw through the back of the strings etc , and with all those bodies lift it in ? There looks to be plenty of room in the loft 👍
@mrabuilders6723
Жыл бұрын
Hi Dermot. Thanks for the comment and you maybe right with that option but as I pointed out in the video I don’t do stair installs every day or even every month so I do it the way my brain works at the time to make sure it all goes as it should do and if for any reason I have my measurements incorrect we would be in trouble with it all glued and screwed together. Have a good weekend Dermot 👍🏻
@tonymcroberts3252
Жыл бұрын
That's the easiest and best way to fit stairs with winders if you've got enough room in the loft or floor above, assemble the full staircase and drop it in the hole.
@garysmith4717 Жыл бұрын
Naughty Mick
@jetski97012 ай бұрын
🤔🤔🤔🤔🫢🫢🫢🫢
@andymitchell368 Жыл бұрын
absolutely brilliant loved that what a quality work team you have brilliant
@mrabuilders6723
Жыл бұрын
Hi Andy and thanks for the comment. We are lucky that we have such a good team but we have known each other for a long time which I think helps. 👍🏻
@adambrown6536 Жыл бұрын
What pilot bits are you using?
@mrabuilders6723
Жыл бұрын
Hi Adam and thanks for the comment on our channel. I purchased this set back in July from Amazon Trend SNAP/HD1/SET Snappy Drill Set - 16 piece, Black And added this set also from Amazon. Trend Snap/CS/Set 5-Piece Drill Countersink Set I swap and change my bits all the time but these are still going strong 👍🏻
Пікірлер: 30
4:13 "it's a bit steep" 🤣🤣🤣 comic genius 👏👏👏
im loving mick , he is a howl. i love the running joke of morning mick
Love watching you pair!!! Solid work as always gents!
@mrabuilders6723
2 жыл бұрын
Thanks MMG. Glad you enjoyed the video and taking time to comment.
Blimey that would have given me a heart attack putting that in; you made that look a lot easier than undoubtedly it was not. Lovely work.
Fascinating stuff again
@mrabuilders6723
Жыл бұрын
Thanks Michael appreciate the comment 👍🏻
Great video lads 👍
Great job, team work makes the dream work
@mrabuilders6723
2 жыл бұрын
It does indeed Logan and we are lucky to have a very good one cheers mate 👍🏻
Hair doesn't make the man! Don't let them pick on ya! Your a very clever guy!!!!!
Top job lads 👍🏼 think you did right not adding the rabbit s to Rich's head 😛
Good job lad’s keep going good content!👍
@mrabuilders6723
Жыл бұрын
Thanks Darius there’s plenty more episodes for you to watch since this one hope you enjoy the rest of the series 👍🏻
I always make to top section of stairs first (kite winders newel etc )then simply push the bottom section up to it and fix the 2 together
@mrabuilders6723
2 жыл бұрын
Sounds like a good method Tony. As I said in the video when you don’t do it regularly it all takes a lot longer. I’ll remember that method of yours for next time. Thanks for commenting mate 👍🏻
@Skilledcarpenter
2 жыл бұрын
@@mrabuilders6723 fitted over 40 double winders on a development so big learning curve for me , but I found makeing the top section 1st made the job a little easier 👍
@mrabuilders6723
2 жыл бұрын
Awesome cheers Tony
Really interesting video. What is the advantage to buying a readymade staircase rather than making it yourselves? Is it time or cost?
@mrabuilders6723
2 жыл бұрын
Hi Billy it’s very much both. Although the team are more than capable of making joinery there just isn’t any need when you can pay what we did for this staircase and have it all delivered in kit form to be installed. Plus my workshop became a bar four years ago 😁thanks for commenting Billy 👍🏻
Would it be possible to assemble the whole stairs in the loft and screw through the back of the strings etc , and with all those bodies lift it in ? There looks to be plenty of room in the loft 👍
@mrabuilders6723
Жыл бұрын
Hi Dermot. Thanks for the comment and you maybe right with that option but as I pointed out in the video I don’t do stair installs every day or even every month so I do it the way my brain works at the time to make sure it all goes as it should do and if for any reason I have my measurements incorrect we would be in trouble with it all glued and screwed together. Have a good weekend Dermot 👍🏻
@tonymcroberts3252
Жыл бұрын
That's the easiest and best way to fit stairs with winders if you've got enough room in the loft or floor above, assemble the full staircase and drop it in the hole.
Naughty Mick
🤔🤔🤔🤔🫢🫢🫢🫢
absolutely brilliant loved that what a quality work team you have brilliant
@mrabuilders6723
Жыл бұрын
Hi Andy and thanks for the comment. We are lucky that we have such a good team but we have known each other for a long time which I think helps. 👍🏻
What pilot bits are you using?
@mrabuilders6723
Жыл бұрын
Hi Adam and thanks for the comment on our channel. I purchased this set back in July from Amazon Trend SNAP/HD1/SET Snappy Drill Set - 16 piece, Black And added this set also from Amazon. Trend Snap/CS/Set 5-Piece Drill Countersink Set I swap and change my bits all the time but these are still going strong 👍🏻