Thanks for watching : )

Nice install👍nice seat an storage😎have a good day🥂🇨🇦

@613Builds

3 ай бұрын

Thanks 🙏🏼

Looked like a pretty easy install. Thank you for sharing

@613Builds

Жыл бұрын

Yeah thanks ! Appreciated

For anyone that cares the rear shock spring on the ranchers or at least mine is insanely weak. If you plan on riding someone or working and hauling anything and don't want to be squatting or bottoming out i highly recommend getting the highlifter rear spring if not a whole new shock. The spring will require spring compressor. I got the 2024 and could stand behind mine and could push mine as low as my arms would allow with no effort whatsoever. The highlifter spring made all the difference in the world, that's how it should have come from factory it was ridiculous. Oh yeah im about 5'11" and 180lbs so im far from hulking and that wasn't why it just flew down when pushing it.

@613Builds

5 күн бұрын

@@johnnyreb1475 I think the preload is adjustable 😎🛠️ I haven’t towed anything yet aside from my little yard trailer

@johnnyreb1475

5 күн бұрын

@@613Builds it is but even on the highest setting it was ridiculously weak and hauling a trailer shouldn't be an issue unless rear independent suspension I was referring to solid rear axle and any load on the rear rack. I've seen a stock rancher with rear drop basket with a small child on the back and the rear fenders almost rubbing the tires with stock shock and spring. For a single rider with no extra weight on the back it's fine, and made for a softer ride but anymore than that it just doesn't cut it. I just put a strong made rear rack on and with any weight I can only imagine how low that thing would be riding. I checked a new one out on the show room floor after I got mine and I was bouncing that thing standing flat footed like it was a child's 50 fourwheeler. I just wanted to see if they were all like that. It was a 2024 also so I can't really speak for any other years but I'm pretty sure there's not much difference if any.

Great install. Where did you get the mounting hardware? Thanks for your help.

@613Builds

Жыл бұрын

Hi , my Kimpex nomad trunk and seat combo came with the u-bolts and rubber isolators. It should come as part of the kit, I assume. The only thing that’s not part of the trunk seat is the optional internal dividers , mine came with those but normally it’s an additional option

will this fit a Kodiak 700

Do you still like it? How’s it holding up after 1 year?

@613Builds

3 ай бұрын

Yes we love it for taking the kids or girlfriend, and the cargo capacity is very nice. We do not use the rear rack very often but the cargo capacity in the trunk compensates nicely. It has held up nicely, occasionally I checked the wingnuts to make sure they’re still tight but overall we are satisfied and happy with the Kim cargo trunk and rear seat

I have a question, was there any drilling into the rack with this install?

@613Builds

5 ай бұрын

🚫 No drilling required 😎

will this fit a 2024 Kodiak 700?

@613Builds

5 күн бұрын

@@CraigMcCaslin I’m not sure but I think it’s universal 😎

Mine is in like 4th by 20 mph, how hard are you throttling it, what am I doing wrong?

@lightningfreek

Жыл бұрын

Oh I have the Foreman

@613Builds

Жыл бұрын

I have the 420 rancher but they are both low geared transmissions. I’m considering putting a 26” tire on mine. I had it going 80kph last night wide open in 5th gear with the factory 24” tires . I put the foreman front bumper on here and the only major difference now is the 3rd headlight which I might add later

@613Builds

Жыл бұрын

OH AnD also mine is Canadian version so I’m reading KPH instead of MPH 😅☝🏽

Nice video. Do you feel the 420 is big enough for 2 people?

@613Builds

Жыл бұрын

Yes, with the passenger seat and grips it’s fine, I just wish there was bigger foot rests like some of the competitors have