The P1S has no competition for its price. My only regret is not buying the AMS combo with my P1S.

@WillHampson

10 ай бұрын

Same, love my P1S, wish I got the AMS too which saves $100

@dangerous8333

10 ай бұрын

The K1 max is only $150 more.

@3D_Printing_Lab1

10 ай бұрын

bambu will release there new multicolor system on september 20th

@ipdjbt

10 ай бұрын

Yuck, no thanks.@@dangerous8333

@bryanmar4843

10 ай бұрын

@@3D_Printing_Lab1 What!? Please share the rumored info/link. I'd love to read more about it!

Just got my P1S combo 2 days ago and I'm impressed!

Great video! I'm picking one of these up soon. I can't wait ❤

Always a pleasure to watch your videos. Like the Mr. Rogers of 3d printing. please take that as a great compliment.

I received my P1S yesterday and all I can say is....... I'M AMAZED! This thing printed out parts right out of the box after about 20 minutes of initial setup time and does a really, really, REALLY good job on the prints. If you're a 3D printer person and you've never seen something like this print in person you'd better prepare yourself. The speed of the print head is what I call unreal. So easy to use and prints are as close to flawless as you get without have the part injection molded. 👍👍👍 😄 Side note: Make sure you have solid table or surface to place it on. It can shake most simple tables pretty hard. Doesn't hurt the print but seems to want shake my beer off the table. 🤣

@yeroca

9 ай бұрын

Just pray that the vibration frequency of the P1S printing your model doesn't match the resonant frequency of your local tectonic plate.... :D

@_Patrick_

6 ай бұрын

Any idea how this compares to an ender? I currently have an ender 3 and a mars 3 pro. Resin is a pain to deal with and looking at prints off this machine they look far better than an ender. It is hard to tell tho since it's a KZread video. Does the quality of the machine make a difference? Or is a .16 on a bambulab still going to look like a .16 off an ender?

@midnightvr6538

5 ай бұрын

​@_Patrick_ these printers are so much better then an ender creality just is not a good brand anymore. If you have the money it is a good printer but very loud.

@DaveBuildsThings

5 ай бұрын

@@midnightvr6538 I'll accept the noise (although not really much with P1S enclosure) so long as I get good prints. I want a printer that makes parts for my projects. Not a printer that wants me to baby it for an hour before it will deliver a part.

Really liking what Bambu's doing. I just got my Neptune 4 Pro and I'm loving it, but could see getting a Bambu down the road

Excellent video as always.

@BV3D

10 ай бұрын

Thanks! 😊

Ordered the p1s combo + a complete hardened nozzle assembly. Should arrive next week and i can't wait. Will be my first 3d printer so a lot to learn. But i already have a pretty long print queue, so a lot of possibilities to learn

Great review! I've got my eye on the P1S, hopefully in the near future. Great channel, enjoy your videos, thanks for sharing with us!!

@BV3D

10 ай бұрын

Thanks, Walt! And thanks for watching!

New setup looks good 👍

@BV3D

10 ай бұрын

Thanks 😊

Awesome review! I love my X1C but this one looks great too.

@BV3D

10 ай бұрын

Thanks! I like my X1C as well -- I can print darn near any material with it except for the really exotic stuff.

Nice video! Seems this is the sweet spot right now in the Bambu series. Oh yea, LONG HAIR FOREVER!!! 😎🤘

@BV3D

10 ай бұрын

I agree, I think it's got the best feature set for the money in their product line.

I ordered a P1s based on your review. I been 3d printing for 2 years, all on DIY printers, and I have gotten pretty good at it. I have a heavily modded Ender3V2 that can print some excellent quality models at high speed, but it can only print so long before it requires maintenance / repairs / serious re-calibration. Not to mention I have spend enough money on it that I was almost at the price of a P1p. But now, I just want to print, I want to make toys, parts, art. I don't want to mess with the printer that much, I just want to print. I want to get better at 3d design and design my own models, but I cant do that if I spend all my free time modding / upgrading / repairing / troubleshooting. Thank you for the honest review, appreciate you.

The P1S printers became my workhorses and my X1 Carbon is my surgical knife.

back watching your channel again! have a p1s combo coming soon!

A great review, I am receiving my bambu labs P1S tomorrow and cannot wait to try it !

@BV3D

10 ай бұрын

Did you get it as a combo with the AMS? I hope you enjoy it!

@ferguson9112

10 ай бұрын

@@BV3D not yet with the ams, as I post process all of my prints, but I cannot wait to try this new system. I had an overly modded ender 3, which basically had nothing original on it except certain frame parts. I spent more time tuning my printer and trying to troubleshoot it, that I was disinterested in using it. This seems very user friendly and with food advancements

Nice printer. I'm tempted, BUT, I must have a color display. I haven't done monochrome since the early 2000's. Sure, some people don't care, but I'm spoiled and only want color. It's not like a color display costs that much more at all. I have a ton of them for projects I make and they are not pricey. That being said, the other issue is all that waste. I've been watching some vids on that and there are ways to avoid almost all waste. For one, there's a new option that takes advantage of a long retraction. It will retract most of the filament, only purge a little bit and change filament. Then, there's another option (if I understand this correctly) where you can have a "purge tower." The recommendation is, that if you are printing multiple parts, you can select one of the parts to be the purge tower, where you don't care about it's color (could be a part inside another part). So no purge waste as the parts is built with the purged material. Of course, there's infill as well, but I'm not sure how well that works. I understand that there's also an option to just turn purging off altogether. This would be if you don't care about where the colors change, in that, you don't need a sharp change. I'd be good with that. But the monochrome display is a deal breaker for me. It's too bad that they don't offer an "upgrade" to a color display or just dump the stupid monochrome display altogether.

Very thorough review.

@BV3D

10 ай бұрын

Thank you!

Thank you for the video. I love your voice. You remind me of Casey Kasem doing the top 40 count down.

Great review!

@BV3D

10 ай бұрын

Thanks, glad you liked it!

Got the x1 carbon but looking to get a second machine. This would probably be the one I get next. Great video ty

You need to design your models with layer height in mind for painting when using ams. That way you limit changes in color as often. Make surface layers height on your models slightly higher in spots you need to immediately change colors.

Loving the t shirt

@BV3D

10 ай бұрын

Thank you!

I noticed the only time I have problem with the AMS is when I use a elegoon and that might be because they use cardboard spools

I like the dual filament of the dragon. You have a link to the material?

Great review! Would've loved to know the printing times on all the different models, but useful to see the quality nonetheless.

I’d be curious to know if you print a whole bed full of the multicolor planetary gears and divide the total time by the number you printed, how long it would take since you have more prints per filament swaps.

I believe "velocity painting" describes the surface change in the benchy. I've only seen 1 YT video about it years ago though.

@BV3D

10 ай бұрын

I vaguely remember seeing people posting prints on Twitter a few years ago, but I don't remember seeing a video. It's kind of cool, though, when it's done deliberately and with a pattern.

Awesome review of the P1S Bryan! I was able to save $ and could now afford the X1C with AMS. Do you think the X1C price difference to the P1S is greatly justified?

Love my P1P but would choose this had it been available.

@BV3D

10 ай бұрын

Yeah, I gotta say, like this one a lot.

One day I'll get a bamboo.

@ipdjbt

10 ай бұрын

Might be better off with a Bambu instead.

@maxharnisch314

10 ай бұрын

@@ipdjbt I would sell anybody bamboo for $700.00 any day of the week.

Just ordered the p1s, should i just go and buy the hardened steel nozzle accessory

Really tough choice for me .P1s with AMS is just about $1000 after tax. Creality K1Max is $860 after tax during labor day sale. Most of what I print is Flexible TPU so speed and AMS doesn't really matter as much. But would still be nice to have for other filaments. Don't really plan on abrasive filaments either. Mainly PETG,PLA,ABS possibly. Bambu definitely seems more refined with the slicer and hardware. But the K1Max has the 300m build volume. I feel like the P1s 256mm^3 would be just enough for most things. I've run into size issue on my SV06 with 220mm build volume occasionally . Hard to choose between cheaper K1max with bigger volume but no AMS or slightly smaller P1S for$140 extra. Would love your thoughts. Thanks gain for the video, really helps to make an informed decision.

@wildfire9887

8 ай бұрын

So, just my two cents on the matter. Firstly, the Creality app has so many ads and is not nearly as user-friendly as the Bambu app, which personally would be reason enough for me to go with the P1S. Also, even if you don't plan on doing multi-color prints, the AMS just adds a level of convenience by being able to have four colors/types loaded and ready to go. In your case, as you print a lot with TPU, you'd probably want to add/print a Y-Splitter so you can easily switch between the AMS and your TPU spool as TPU doesn't work when loaded into the AMS unit. Assuming you really are not limited by the smaller buildplate and are able to print most of the things you want, I think the P1S is a no-brainer.

@nykidxxx

8 ай бұрын

If the AMS doesn’t matter much then you shouldn’t be factoring it into the cost comparison. Without the AMS, the P1S is cheaper by $160. The print bed size is probably what you need to consider if you regularly do prints over 256mm

Wow, are you at Uncle Jessy's house?

Can you use prusaslicer & send that file to the P1S via the app? Or do you have to slice in prusaslicer and then use an SD card to get it to run on the P1S?

Really having a hard time deciding on a P1S or X1C. Pulling the trigger in a few days. Not sure if I will be printing CF but but wouldnt hurt to have that ability.

@Huntman2244

7 ай бұрын

I am pretty sure that you can upgrade the nozzle on the p1s to print carbon fiber.

Hi, I’m shopping for this potential printer. I appreciate your review. I’ve looked at the bamboo, labs wiki operators information and I cannot find any information about the physical clearance for the install of the P1 S. Do you have any dimensions you could share I’m specifically wondering how much room needs to be left at the back of the P1 S for the spool. I also can’t find any direct information about how much physical space the addition of AMS would take in a workspace. Would you be able to provide that information? Thank you.

I've noticed a lot of people, while using different printers, say they have the same gloss on the bottom and non gloss on top when printing that little boat, I wonder if it's maybe in the file since a real boat, the color would be off due to corrosion on that portion of the boat that goes in the water...idk cause I've not seen anyone so far that hasn't had that same thing. I'm probably wrong, but just a thought cause if nothing else you print has the same issue, then maybe🤷‍♂️

First comment as you're awesome and stronger :3

Looking at stepping up from and Ender 3v2 to a P1S. Is the P1S quieter then the Ender 3 v2?

You missed PVB in that list Bryan, by the way any chance of you acquiring some for a review?

Is their a aftermarket screen for p1s

Please help me decide. Creality k1 max or bambu ps1. If you had only one. Simply which is better all around.

Awesome review, just wish your studio lighting was the same...

@BV3D

8 ай бұрын

Working on it! It's getting better, I promise. (And thanks for the feedback) 😉

I’m still trying to make up my mind x1c or the p1s I know I can’t go wrong with either money is not the problem just the bells and whistles part both look too good for the price

Great video. Pity they are so pricey to import to South Africa.

Can you set the ams with two of the same spools and have it continue with the second one if the filament runs out?

@cbking95

10 ай бұрын

Yes!

For a bit I thought this was the new printer everybody is talking about - then I went to their website and saw they aren't revealing it until the 20th. Oh well.

So a new P1S, lucky I didn't buy the old P1s, the new one finally comes with a real touch screen!?

@BV3D

10 ай бұрын

Hi, the P1 and P1S both use the same monochrome LCD with the button controls, no touch screen. So far, only the X1 series has a touch screen.

I'm new to all this but I feel like I'm skipping alot of bad experience if I just buy this. Will things be easy for me as a beginner if I just break the bank and get this?

@thebryceisright1951

Ай бұрын

Yes, 100% I started off with a creality ended 3 and I was fixing things on it every other day, it was a pain in the ass constantly troubleshooting, and I wish I had spent more money on my first printer so that I could avoid this.

@AA-xm7rt

Ай бұрын

@@thebryceisright1951 I needed up buying the x1c with all the spare money I had and I have it for 4 days now and it's simply amazing! I'm so happy with this new hobby my head is exploding with ideas and so far everything I do that's not a mistake on my end has worked perfectly. The one thing is that when it breaks down it will be harder to repair with my experience of 4 days but I repair consoles so I figured I can handle this too. I'm amazed by this technology!

I'm confused. What do you mean by first look? I own one of these already. They've been out for months.

@BV3D

10 ай бұрын

It was my first look at a printer that's been out for a bit over a month. And I'm super happy you've got one! How are you liking it?

aww 256x256x256 how cute.

@BV3D

10 ай бұрын

🤣 It's no Neptune 3 Max, that's for sure. You won't be printing single-piece helmets on it. Well I mean you might be able to print a single-piece helmet for a cat. Which actually would be pretty cool...

@scarfa21

10 ай бұрын

I picked up a Qidi XMax 3. Amazing, you should review one :) @@BV3D

Omg it's so sexy!

Dear 3D Printing Jesus.......if i become a disciple of your 3D Printing Religion😇, Do i get a Printer too🤔...Cheers from Downunder