fire pumps installation details

fire pumps installation details
visit for comphansive details..Thanks
informations786.blogspot.com/2...

Пікірлер: 176

  • @mohammedmakeen9132
    @mohammedmakeen91326 жыл бұрын

    appreciate your hard work for us afreen Bhai...keep sharing knowledge..very helpful

  • @MrMute-md6gy
    @MrMute-md6gy5 жыл бұрын

    Thanks for priceless information you provided

  • @paulsmith7639
    @paulsmith76395 жыл бұрын

    Also the auto air vent valve is missing a top U bend to prevent contamination ingress.

  • @ramsiramsath
    @ramsiramsath4 жыл бұрын

    Hi, If the pump room is designed as per NFPA 20 requirement, you should keep 10d of suction line. and some more i found.

  • @premvigneshappiya9583
    @premvigneshappiya95835 жыл бұрын

    Hi, The video is very informative and good. Could you please explain on Electrical panel connection and Pressure details on various pump.. Thank you..

  • @Johnwick-dt9vx
    @Johnwick-dt9vx4 жыл бұрын

    Are UL listed check valves necessary requirement or non UL listed check valves can be used?

  • @zealotleader5203
    @zealotleader52035 жыл бұрын

    Hello What you say about it? I THINK if the source of supply is above the pump,the eccentric reducer must be placed with the flat side down.. you are correct in this

  • @Praveen271
    @Praveen2714 жыл бұрын

    Good one bro..!!

  • @uzairmalik498
    @uzairmalik4985 жыл бұрын

    Good video....World is moving towards standardization. Last month I was working on a project in 62 story building in Karachi and observed the same fire suppression system.

  • @food4u598
    @food4u5985 жыл бұрын

    which schedule standard pipe is used for this? what materials is used ? why they all in red color ?

  • @stalinmarmatas7428
    @stalinmarmatas74287 жыл бұрын

    With out a tamper switch for each gate valve for monitoring?

  • @paulsmith7639
    @paulsmith76395 жыл бұрын

    The suction reducer is installed incorrectly. The float of the reducer should be on the top to prevent air traps. It’s upside down!

  • @yunuspervez4702
    @yunuspervez47023 жыл бұрын

    Eccentric reducer in pump suction should have flat top.

  • @shafiqrehman7436
    @shafiqrehman74365 жыл бұрын

    Respected sir, have you any inspection layout OF ELECTRIC FIRE PUMP ? Reply

  • @laphilong2860
    @laphilong28605 жыл бұрын

    Hi Friend, Please Show me, I think the center line plant off Tee and horizontal split-case Pump shaft should not be parallel. is it right??

  • @vinaygoel859
    @vinaygoel8595 жыл бұрын

    HELLO SIR good morning sir what is the minimum pressure in pipe according to chart please explain it

  • @hamedfaiz5992
    @hamedfaiz59926 жыл бұрын

    Explain is good.. But I have one doubt how did working electrical to mechanical power ,so i ask you explain to electrical and panel board side..how automatically running ,used any sensor.?

  • @SAFETYMGMTSTUDY
    @SAFETYMGMTSTUDY6 жыл бұрын

    Nice video sir

  • @rods1812
    @rods18127 жыл бұрын

    Hi friend... the excentric reducer flat side must be on top and de reduction side on bottom.. this is to prevent the formation of air pockets on the suction pipe..

  • @afreenali

    @afreenali

    7 жыл бұрын

    Thanks for You are right

  • @afreenali

    @afreenali

    7 жыл бұрын

    kzread.info/dash/bejne/m3141dKuo8iWesY.html

  • @afreenali

    @afreenali

    7 жыл бұрын

    kzread.info/dash/bejne/a2SImdKAe86XncY.html

  • @haleemfp

    @haleemfp

    6 жыл бұрын

    I was about to say this.... in this case if installation, air trapped and goes to impeller. Thereby the effect of cavitation increase and will heat and damage the pump. What I said is as per nfpa 20.

  • @gettingintoaction1

    @gettingintoaction1

    5 жыл бұрын

    Flat side of Eccentric reducer should be down , when source of supply is above pump and vice versa.

  • @mohseenaphaniband4740
    @mohseenaphaniband47406 жыл бұрын

    First of all thanks for uploading the vedio,The flexible bellow provided after the gate valve for electrical and diesel pump must before the pump connection ,must be same as shown for jockey pump The pressure sensing line at the discharge of pump not explain in the vedio , what about the strainer at the inlet of the pump .

  • @TayyabKhalil
    @TayyabKhalil7 жыл бұрын

    Very informative. Thank you for taking out your time to make and upload this video.

  • @jagsingh8324
    @jagsingh8324 Жыл бұрын

    Very informative, good content

  • @silent9566
    @silent95666 жыл бұрын

    what is the black thing in the diesel pump?

  • @ambaisi
    @ambaisi4 жыл бұрын

    Is 1/2 inch pipe sufficient for the supply of diesel from the tank to pump?

  • @afreenali

    @afreenali

    4 жыл бұрын

    Yes sure good

  • @ambaisi

    @ambaisi

    4 жыл бұрын

    @@afreenali Thanks a lot.

  • @madhusudhanbt935
    @madhusudhanbt9357 жыл бұрын

    It's a nice info, may I know if it is a real fire electrical operated pump or DG operated pumps only supply water to sprinklers or hydrent system. On that time jockey pump stop working(because jockey pump is only to maintain pressure in the respected network)

  • @afreenali

    @afreenali

    7 жыл бұрын

    yes sure: real fire electrical operated pump and Digital fully Automatic Water Pump Control by BMS system..Thanks

  • @madhusudhanbt935

    @madhusudhanbt935

    7 жыл бұрын

    afreen ali Sorry I mean to ask Jockey pump is for only to maintain pressure not to supply water continuously while using hydrants for continuous firefighting

  • @afreenali

    @afreenali

    7 жыл бұрын

    Brother Jockey pump maintain pressure not to supply water continuously only in case of leakage because Pump only 25 GPM and main Pump 500 GPM . Jockey pump can not be pump in high grade pressure in the system. Thanks

  • @madhusudhanbt935

    @madhusudhanbt935

    7 жыл бұрын

    afreen ali thank you brother for ur clarification. Now I got my ans

  • @afreenali

    @afreenali

    7 жыл бұрын

    welcome

  • @sudarsansahoo8449
    @sudarsansahoo84496 жыл бұрын

    Afreen Bhai mujhe Khushi hui is bat ki aap fire safety ki jankari bataya magar ek chig adhura rahagai aap har fire motor Ka pressure kg aur agar Kisi motor lineme Pani Kam ho yaniki pressure Kam hojaye kya Karna padega

  • @nadimakhtar711
    @nadimakhtar7116 жыл бұрын

    Useful for me.

  • @akilinayat9595
    @akilinayat95952 жыл бұрын

    Glycerol filled pressure gauges to be used with syphon arrangment. Manhole door is not provided for diesel tank for yearly cleaning tank. Level gauge is also not provided to diesel tank for diesel level checking Batteries terminal, plastic protection caps are not provided.

  • @nayeemhussain8121
    @nayeemhussain81213 жыл бұрын

    Hi sir, my name is nayeem, and just want to know any design vacancy in fire protection system, I have 4 years of experience in fire fighting and fire alarm system... Thank you

  • @khadeershaikh1418
    @khadeershaikh14187 жыл бұрын

    please tell me pressure maintained at jockey and electric pump

  • @afreenali

    @afreenali

    7 жыл бұрын

    kzread.info/dash/bejne/a2SImdKAe86XncY.html

  • @Ansari29
    @Ansari293 жыл бұрын

    Nice Video 👍

  • @sruthijeril8026
    @sruthijeril80264 жыл бұрын

    Can you make on video on 1) fire diesel parts and it function 2) fire pump inside parts and functio

  • @danish2zia
    @danish2zia6 жыл бұрын

    Can you please share electrical termination details of diesel pump and electric pump

  • @SuperRancell
    @SuperRancell4 жыл бұрын

    FOR HVAC PUMPING DESING Hi thanks a lot for you videos I have a question... For calculate the Head at the secondary circuit: 1.- Evalute the pipings circuit from the decoupler??? 2.-How estimate the energy flow at Primary Circuit (inposted by the primary pumps) for evaluate the HEAD at the secadary circuit ???

  • @ShoebKhan-mb9tc
    @ShoebKhan-mb9tc6 жыл бұрын

    Why there is no strainer before pump inlet?

  • @karemasamuel1330
    @karemasamuel13307 жыл бұрын

    very good

  • @simpledesign5305
    @simpledesign53052 жыл бұрын

    Great.. Thanks for this

  • @kunalkamble3540
    @kunalkamble35402 жыл бұрын

    Sir, Why in Dubai indian experience is not considerared.

  • @jaipur3808
    @jaipur38083 жыл бұрын

    Why bypass is provided after Discharge Point in Diesel Tank ?..and that also went back to main storage tank why??

  • @shaikgm8084
    @shaikgm80845 жыл бұрын

    sir... i want connections from diesel tank to diesel pump please tell me how to connect this one,how many inch pump using in this connection....please give me replay

  • @allangascon8242

    @allangascon8242

    5 жыл бұрын

    In diesel pump you can see the two black hose pipe with a tag for the supply and return connection.never to use a gate valve in the return piping line.

  • @hlamoe935
    @hlamoe9356 жыл бұрын

    Installation shown here are not up to NFPA 20 Standard, suction distance not proper, eccentric reducer mounting wrong and OS & Y GATE Valve has no temper switch.

  • @Highlights_football_cricket

    @Highlights_football_cricket

    5 жыл бұрын

    Can you please tell me about distance and the detaila which we need to take while installing a pump

  • @allangascon8242

    @allangascon8242

    5 жыл бұрын

    Correction,tamper switch sir not temper switch

  • @mohammadshojib2927
    @mohammadshojib29275 жыл бұрын

    No Supervised system found for gate valve.

  • @msajjadalimsajjadali6742
    @msajjadalimsajjadali67426 жыл бұрын

    good job

  • @balansvanas4605
    @balansvanas46057 жыл бұрын

    ECCENTRIC REDUCTION ASSEMBLY INCORRECT

  • @GrimThe21

    @GrimThe21

    5 жыл бұрын

    NO IT IS NOT.. You have to realise that water soarce is supplied from above the suction centreline so it must be flat down... Supply from below suction centre line flat ontop.

  • @ChristianGuco

    @ChristianGuco

    4 жыл бұрын

    @@GrimThe21 Yup its a positive suction, but installing eccentric like that is bad practice

  • @leonardlim4838

    @leonardlim4838

    3 жыл бұрын

    @@ChristianGuco sir what is the correct position of escentric reducer?thank you

  • @ramalingeswararaobhavaraju5813
    @ramalingeswararaobhavaraju58133 жыл бұрын

    Thank sir.

  • @muhammadnouman519
    @muhammadnouman5192 жыл бұрын

    Where is Y strainer to every pump in suction line?

  • @dsmehndi5813
    @dsmehndi58134 жыл бұрын

    Will u plz tell me in a single fire room. How many types of pumps are needed to assemble process

  • @patrickharper3383

    @patrickharper3383

    4 жыл бұрын

    1

  • @ahammadhusen9932
    @ahammadhusen99326 жыл бұрын

    Sir please upload video of cooling tower and its pipe layout with valve.

  • @afreenali

    @afreenali

    6 жыл бұрын

    shortest time in this week thats why i cannot make video in this week hope i will make soon i noted for you Thanks

  • @beltranfloresflores2408
    @beltranfloresflores24084 жыл бұрын

    Mejorar la toma, la succión en desorden

  • @allankusumah2794
    @allankusumah27946 жыл бұрын

    the flexible is useless if you install far form pump and between the fix support what for is useless. and the excentric reducer installation is reverse that can use air trap is suction pipe and can cause cavitation at pump. the maintenance space for both engine and fire pump is not good. the battery position in front of fire pump control panel how come.

  • @YaseenKhan-pe3qj
    @YaseenKhan-pe3qj5 жыл бұрын

    suction pipe minimum length from pump flange to fitting shall 0 times of pipe dia

  • @emonframework6282

    @emonframework6282

    3 жыл бұрын

    10 times of pipe dia as per nfpa 20

  • @shaikkareem1142
    @shaikkareem11425 жыл бұрын

    Hi, sir u r vdos is good but in hind tips ok u have mor vdos please give me ok and thanks

  • @saadkadu3835
    @saadkadu38356 жыл бұрын

    Plz upload video on working of Deluge valve

  • @afreenali

    @afreenali

    6 жыл бұрын

    Deluge Valve is known as a system control valve in a deluge system, used for fast application of water in a spray system. Deluge valve protects areas such as power transformer installation, storage tank, conveyor protection and other industrial application etc

  • @fahadelambilacheri6120
    @fahadelambilacheri61207 жыл бұрын

    I AM 5 YEAR EXPERIENCE I FIRE FIGHTING ENGINEER ANY GOOD OPRTUNITY

  • @nahidhassan8500

    @nahidhassan8500

    6 жыл бұрын

    Fahad Elambilacheri add me in what's app - +8801811900607

  • @br01engineeronwheels
    @br01engineeronwheels2 жыл бұрын

    What's the responsibility of Pump technician ?

  • @asgarfarooque6802
    @asgarfarooque6802 Жыл бұрын

    Achcha after installing all the recommendation given by the fire brigade and achieving their certificate and just after achieving the certificate in a month or 2 fire happens in that building who is responsible

  • @TheNetcubus
    @TheNetcubus7 жыл бұрын

    nice work my friend , it would be nice if u provided some tech details . thank you

  • @afreenali

    @afreenali

    7 жыл бұрын

    thanks soon i am working in detail drawing i will upload soon Thanks☺

  • @afreenali

    @afreenali

    7 жыл бұрын

    kzread.info/dash/bejne/m3141dKuo8iWesY.html

  • @afreenali

    @afreenali

    7 жыл бұрын

    kzread.info/dash/bejne/a2SImdKAe86XncY.html

  • @LatheWar
    @LatheWar5 жыл бұрын

    Sir hindi me batao ye

  • @AliRaza-cn7qw
    @AliRaza-cn7qw5 жыл бұрын

    Salam Bhai ap ki video thyk but agr English main explain ni ho rhi to Kia zarorat ha English main smjhany ki Hindi main smjha dety achi smjh a jati

  • @rajibnandi7989
    @rajibnandi79897 жыл бұрын

    can u help about fire fighting technicians. we have company here in dubai?

  • @afreenali

    @afreenali

    7 жыл бұрын

    kzread.info/dash/bejne/m3141dKuo8iWesY.html

  • @afreenali

    @afreenali

    7 жыл бұрын

    kzread.info/dash/bejne/a2SImdKAe86XncY.html

  • @oluyemiakande5626

    @oluyemiakande5626

    7 жыл бұрын

    am a good technician, i know fire works and domestic plumbing

  • @naveend1373

    @naveend1373

    7 жыл бұрын

    Oluyemi Akande .msg me 9963792657 Naveen India

  • @rajibnandi7989

    @rajibnandi7989

    7 жыл бұрын

    just text me by whatsapp +971566279462

  • @Hvacian
    @Hvacian6 жыл бұрын

    horrible voice ..not cleared ..your video is good ..but what are you saying ..?

  • @Fakhrealammm

    @Fakhrealammm

    6 жыл бұрын

    have you payed him for the video?

  • @jiromartinez3301
    @jiromartinez33015 жыл бұрын

    Eccentric will be on the suction side and concentric will be on The discharge side

  • @ramasare886

    @ramasare886

    5 жыл бұрын

    🍼

  • @angelosalinas4057
    @angelosalinas40572 жыл бұрын

    What is that?

  • @user-lh7iv5gs2c
    @user-lh7iv5gs2c3 жыл бұрын

    انا فني تركيب مضخات في طرق اسهل من كده بكتير

  • @erwincallao9018
    @erwincallao90186 жыл бұрын

    Your flexible is not listed.

  • @forexlearnpro2264
    @forexlearnpro22646 жыл бұрын

    Mery pyary bahi pls ap hindi ya urdu me video banao pls

  • @afreenali

    @afreenali

    6 жыл бұрын

    bhai Hindi mai b video hai ..check in my channel

  • @namiramariamhayath6858

    @namiramariamhayath6858

    6 жыл бұрын

    Boss, where's the strainer in the inlet, no identification or tagging, not told about working of different pumps, where is pressure switch? Sensing line? Only gate valve????

  • @gowthamansairam5841
    @gowthamansairam58412 жыл бұрын

    Where is the main raiser.......

  • @chetan1972
    @chetan19727 жыл бұрын

    Why sprinkler pump was not installed in the pump room?

  • @nasrinaktar7298
    @nasrinaktar72982 жыл бұрын

    i no this work

  • @MDKHAN-nh5vg
    @MDKHAN-nh5vg3 жыл бұрын

    Not installed as per NFPA

  • @rajeshgummula3479
    @rajeshgummula34797 жыл бұрын

    nice bro i like

  • 7 жыл бұрын

    Chuyên g/c và Lắp đặt: INOX- CẤU KIỆN THÉP- HỢP KIM NHÔM CN:" BỒN CN- BỒN ÁP LỰC- BỒN GIA NHIỆT- BỒN CHỨA THỰC PHẨM- SILO- ỐNG CN- ỐNG VI SINH- ỐNG THỰC PHẨM- BỒN &ỐNG GAS CN- BỒN KHUẤY CN": 0974060068( Mr Hoàn)

  • @shahzadkhan-bs7vb
    @shahzadkhan-bs7vb7 жыл бұрын

    Please tell me in urdu or hindi.

  • @afreenali

    @afreenali

    7 жыл бұрын

    as soon i will make

  • @metropcsspringvalley2102
    @metropcsspringvalley21025 жыл бұрын

    The small pump isn't chipping out i think it's the check valve but it was recently changed

  • @mohammedsafeer2725
    @mohammedsafeer27256 жыл бұрын

    your installation of reducer at pump suction flange is wrong

  • @zealotleader5203

    @zealotleader5203

    5 жыл бұрын

    I think , if the source of water supply is above the pump , the flat side of eccentric reducer should be down.. what you say ?

  • @advantureindia951
    @advantureindia9514 жыл бұрын

    Khana khake boliye sir kuch sunai nahin deta...😜😜😜😀😀😀😃😀

  • @muhammaduzairmukhtar
    @muhammaduzairmukhtar7 жыл бұрын

    Dear Afreen are you work in KSA?

  • @afreenali

    @afreenali

    7 жыл бұрын

    Yes Dear

  • @muhammaduzairmukhtar

    @muhammaduzairmukhtar

    7 жыл бұрын

    AfreenAli In which city, Can you please give me your mobile no

  • @afreenali

    @afreenali

    7 жыл бұрын

    I m on vacation in will back after one month

  • @TheCrustyFry
    @TheCrustyFry5 жыл бұрын

    You need to flip the eccentric reducer upside down.

  • @usmannomi4626
    @usmannomi46264 ай бұрын

    Prv Khan ha

  • @mdramjanali44
    @mdramjanali445 жыл бұрын

    please translate in bangla/hindi

  • @KMA835
    @KMA8356 жыл бұрын

    i can't hear you bro

  • @Sanjayjhaofficial962
    @Sanjayjhaofficial9625 жыл бұрын

    G

  • @ibrahiminayat505
    @ibrahiminayat5054 жыл бұрын

    jab enghlis nahe aaty tu q bat karta ha

  • @Pelusacollective
    @Pelusacollective6 жыл бұрын

    mumble mumble jumble ok ok .... let me guess he works in Dubai

  • @joshfreak0007
    @joshfreak00077 жыл бұрын

    Speak louder dude

  • @afreenali

    @afreenali

    7 жыл бұрын

    next time i have to try my level best .Thanks

  • @afreenali

    @afreenali

    7 жыл бұрын

    kzread.info/dash/bejne/m3141dKuo8iWesY.html

  • @afreenali

    @afreenali

    7 жыл бұрын

    kzread.info/dash/bejne/a2SImdKAe86XncY.html

  • @leventkuzay5983
    @leventkuzay59835 жыл бұрын

    min. 10XDia. straight pipe should be installed in order to avoid turblent flow in suction side of the pump.

  • @syedzubairali5269
    @syedzubairali52697 жыл бұрын

    hi bro

  • @iqbalkhan1640
    @iqbalkhan16405 жыл бұрын

    Awesome sir bt voice problem

  • @muratakay3499
    @muratakay34997 жыл бұрын

    there are unnecesary equipments. Suction side have extra unnecessary valve and rubber compensator::::)))))

  • @afreenali

    @afreenali

    7 жыл бұрын

    this is as per NFPA installation..thanks

  • @afreenali

    @afreenali

    7 жыл бұрын

    kzread.info/dash/bejne/m3141dKuo8iWesY.html

  • @afreenali

    @afreenali

    7 жыл бұрын

    kzread.info/dash/bejne/a2SImdKAe86XncY.html

  • @mohammedkirmanisyed7960

    @mohammedkirmanisyed7960

    6 жыл бұрын

    Not at all NFPA 20 installation's followed....suction side reducer is eccentric....but installed incorrectly. ..the taper side should be bottom not on top side...and many more...

  • @paradoxlearningpoint4296
    @paradoxlearningpoint42963 жыл бұрын

    apni english bolte somossa hole banglai bolen, kotha sposto hoini apnar

  • @debashisdas3598
    @debashisdas35986 жыл бұрын

    Improve your voice and you are only showing the parts without explaining their functions and how do they work. Don't just post any video randomly without any preparation. I don't mean to hurt you, but please check these points so as to improve yourself

  • @afreenali

    @afreenali

    6 жыл бұрын

    OK------group link chat.whatsapp.com/InDSuQrqStPED1lVYlhQ7k

  • @farrukhmehmood679
    @farrukhmehmood6795 жыл бұрын

    Sir hindi urdu main b btya krin please

  • @husseinbindhafer3840
    @husseinbindhafer38405 жыл бұрын

    i cant hear you clearly what the explanation is

  • @jitbiswajit7336
    @jitbiswajit73363 жыл бұрын

    Very poor presentation.Must start from pump foundation and then proceed from there.

  • @mohammedsamimukarram2270
    @mohammedsamimukarram22707 жыл бұрын

    wtf dude

  • @afreenali

    @afreenali

    7 жыл бұрын

    kzread.info/dash/bejne/m3141dKuo8iWesY.html

  • @afreenali

    @afreenali

    7 жыл бұрын

    kzread.info/dash/bejne/a2SImdKAe86XncY.html

  • @Antindev
    @Antindev5 жыл бұрын

    Speak to good voice.. Not good u r voice. I can't able to understand...

  • @niazafridi3651
    @niazafridi36519 ай бұрын

    Rubbish sound volume

  • @jiromartinez3301
    @jiromartinez33015 жыл бұрын

    Eccentric reducer position is wrong

  • @ivanivanov7671
    @ivanivanov76715 жыл бұрын

    Totally wrong assembly. This won’t be accepted by any assurance company.

  • @food4u598
    @food4u5985 жыл бұрын

    which schedule standard pipe is used for this? what materials is used ? why they all in red color ?

  • @rubengajol6006

    @rubengajol6006

    5 жыл бұрын

    red color is a sign of fire protection line,,