The Eeveelution perler turned out amazing!!! Nicely done ^w^

@beadamonpixels

Жыл бұрын

Thank you! It was really fun to make

man can we just appreciate the work this man does for our entertainment. my personal favorite eeveelution is leafeon

This channel is so underrated :( I love your art and the quality of your videos!

@beadamonpixels

7 ай бұрын

Thank you! I really appreciate your comment. It takes a lot of work to make all this 😅

Now make it again but them shiny! (The side by side comparison of that would be epic) Also I am sooo glad that it didn’t get messed up on the melt. Love the snom in the background as well. Also how many beads did you use? And how long did it take (like amount time placing beads)

@beadamonpixels

Жыл бұрын

oh man having a side by side would be really cool. Ill have to make a new sprite for the shinies. It was about 8k beads total and took me roughly 22 hours for just the beads part. A bit more to iron, poke holes, etc.

dude what an awesome job!

@beadamonpixels

Жыл бұрын

Thank you! It was a massive amount of work lol.

When you said that you needed a breather after the flip, I felt that in my soul. Lol great job on this amazing perler!

@beadamonpixels

3 ай бұрын

lol thank you!

You probably already thought of this, but you could probably lay a big piece of cardboard under the peg boards, lay the beads, tape them, then put another big piece of cardboard over the tape-side, squeeze pieces of cardboard like a sandwich, and quickly flip? So now the pegboard side is on top, and all you have to do is remove the pegboards from the beads. I imagine I could take the anxiety/risk out of flipping the piece by holding it only by the tape!

@beadamonpixels

7 ай бұрын

That would for sure be the best way to do it. I usually only do that if the beads are already messed up. Generally (lol) they will stick to the tape

I got nervvous on the flip, good job!

@beadamonpixels

Жыл бұрын

lol i do too on the bigger ones and thanks!

My husband saw your videos and now wants me to make a big piece for him as well!! Do you maybe have a full picture or patern so i can try to make this for him? That would be awesome. Love your works!

I subbed cause of this piece 😍😍😍😍 such amazing work!!

@beadamonpixels

8 ай бұрын

Thank you so much!

This was so interesting!!

@beadamonpixels

Жыл бұрын

Thank you, I'm glad you liked it!

To cover the perler with tape, remove it from the plates and then iron it is so much smarter... I need to try this! I made some Christmas tree ornaments last year and ruined two plates because they melted at the tips while ironing... very frustrating!

Very nice. KBYEEEEE

This is insanely cool!

@beadamonpixels

Жыл бұрын

Thank you!

I want one so much!! 😍😍😍 amazing!

Found this absolute gem after a few mins of looking, well done mate this is amazing ❤

As someone who has no familiarity with perler beads... why does it need to be taped and flipped? Can't you just iron it as it's on the plastic holders or would that cause issues?

@beadamonpixels

Жыл бұрын

The tape allows me to pull the whole perler design off those plastic pegboards. The pegboards arent heat resistant and melt under the beads if you iron directly on them.

@nyancat8828

Жыл бұрын

@@beadamonpixels Ohh okay! Neat to know :D

That was really quite impressive, especially for something I didn't even know existed half an hour ago 😋🥰 Looks really cool

That's lovely 🌹

My last couple melts have gone awry sadly with blowouts. It’s only because I have such a small iron so when I do my large perlers I get screwed because they all can’t stay warm. I’ve noticed that some beads melt differently than others especially like pastel yellow feels like that takes longer than other colours. Was wondering if you got any suggestions for beads that melt slower than others or what might be better

@beadamonpixels

Жыл бұрын

I assume you are doing the tape method similar to how i do it? Poking all the holes in the tape before ironing? Also are you using all the same brand? Mixing brands will absolutely cause the melt to be more difficult. There's a lot of suggestions but the main ones i would say is to make sure you arent pushing too hard or hitting the same spots more then others. I've pushed too hard before and caused blowouts even with the holes in the tape.

@dewey9499

Жыл бұрын

@@beadamonpixels correct I use the tape method like all holes and make sure of it and all beads are from perler. I do press hard sometimes so that could definitely be it for sure so next time definitely won’t press as hard appreciate it!

@beadamonpixels

Жыл бұрын

You're welcome! Let me know how it turns out next time.

Isnt it easier to flip the whole project with the panches still on? Then you just carefully lift them. Thats how i do it

i love the design soo much can you make like a blueprint for what perlers i need and were they need to go?

what heat settings do you use with the circuit press?

OMGGG I FELLL IN LOVE WITH THIS CHANNEL ALL NEW TO ME ISS SOOOO AWESOME 👍 😎 HAVE YOU DONE A ARMORED MEWTWO?

I’m very nervous to try my hand at this one lol

@beadamonpixels

Жыл бұрын

Do it!! It will turn out great. Plus if you need any help or have questions feel free to ask.

This is awsome! Could you do the island guardians from alola? Those are so cool in my opinion

@beadamonpixels

Жыл бұрын

Yeah, ill add them to my list.

Do you have a video of your mounting method?

Why do you poke holes in it?

@beadamonpixels

11 ай бұрын

A few reasons. Mainly to fully melt one side while also not melting the boards under the beds. kzread.info/dash/bejne/k5qhp86zoMycYto.html

@kitkat_moushi

11 ай бұрын

Thanks, I’ve always wanted to try making some larger projects but they never came out right

Question: what about putting clear pearls around the edges to help reduce any deformation or spread when they melt? Or is that not an issue with your technique?

@beadamonpixels

10 ай бұрын

Generally that isnt a problem but i think it would look cool. I want to try it on my next perler.

how long are you ironing it for? im using an iron on highest heat, always getting 1 or 2 beads not fully melting and leaving a hole

If u want to do a massive project I would recommend bowser, peach, mario, luigi, yoshi, donkey Kong, toad, daisy, rosalina, birdo, and toadette if u don’t want to do it it’s completely fine it’s just a recommendation

@beadamonpixels

Жыл бұрын

I do want to branch out and make more content thats not pokemon. Ill remember your comment.

@Mxoon-oz8ps

Жыл бұрын

@@beadamonpixels tysm

@beadamonpixels

Жыл бұрын

You're welcome

wondering how much for a commission exactly like this? would love this for room decor

Does a fork work to poke the holes?

How do you ship your perlers?

@beadamonpixels

Жыл бұрын

I mail them out in Ridged mailers so they dont bend.

Once you have taped the beads, lay one of those really big A1 pieces of card over your design and use it to help flip your work. Then you can just pull up the boards straight from the back of the beads.That way there is less chance of some beads not making it at all, less chance of some moving, and less chance of missing beads that you are unable to see due i be. Most of all, you wouldnt have to poke thousands of holes!! You can also do the smaller ones thos way too. Thank for your videos x

@guyman1570

3 ай бұрын

poking holes is for letting trapped air exit as it expand

which is better? Wax paper or partchment paper?

@guyman1570

3 ай бұрын

Parchment tend to be better in most situations

What about every fox Pokémon in one

@beadamonpixels

Жыл бұрын

That would be pretty cool.

What kind of tape do you use ?

@guyman1570

3 ай бұрын

Painter's tape. It's easy to find at a Home Depot or Lowe's.

@fresss9932

3 ай бұрын

@@guyman1570 the painter tape i have here is not as thick/sturdy (we have the yellowish stuff) but will have a look, thanks for the reply :D

Would it be too much to ask u to do the same peler u did in this video Only instead of it going down a line Like they r lined up But with them forming a circle With Eevee in the center In other words All Eeveelutions in 1 big circle With Eevee in the center of the circle But with 2 of each of them 1 being the normal color of each of these Pokémon The other being the shiny In other words Normal & Shiny Eevee in the center & surrounding the 2 Eevee’s Normal & Shiny Vaporeon Normal & Shiny Flareon Normal & Shiny Jolteon Normal & Shiny Espeon Normal & Shiny Umbreon Normal & Shiny Leafeon Normal & Shiny Glacieon & Normal & Shiny Sylveon (Sorry if anything misspelled, spelling is one of my several weakest point)

@beadamonpixels

8 ай бұрын

I’d probably only do it if it was a commission. This Perler was about 25 hours I think to make

@devynnpaige5481

8 ай бұрын

@@beadamonpixels I only said in a circle Because I like the idea of them in a group Like a group hug or a cuddle puddle & I’ve always wanted to see a bunch of normal & Shiny’s together So that’s y most of my requests will be a bunch of normal & shinys Lol

sudas