Great video as usual. Do you have a link to the magnets you used? (Website/size/strength?)

@3DPrintedProps

3 жыл бұрын

Oops. I'll add it today. Thanks.

I just want to say thank you for putting out these videos. I'm just finishing up my first cosplay as the white power ranger. I've been following this guide religiously. The results speak for themselves!

@3DPrintedProps

2 жыл бұрын

Awesome man, glad they helped. :)

Make a predator mask that would be awesome step by step.

@Rampage_88

2 жыл бұрын

Predator mask pls

@ampgent

Жыл бұрын

Yes!!

Wow, your method of using magnets is much easier than other methods I've watched, thanks for this

These tutorials are amazing!

4:05 IT'S REDHOOD!!!! That's soo cool

@3DPrintedProps

2 жыл бұрын

Thanks! 😀

Nice. I didn't realize that hinges can be as easy as a piece of elastic.

@3DPrintedProps

3 жыл бұрын

Yep, You can use elastic or any nylon strap. :)

Man you are awesome im barely starting out and this help a-lot

Very nice, thanks for sharing. 👍🏻

@3DPrintedProps

3 жыл бұрын

You bet. Thanks for watching. 😀

I can't believe those tiny magnets hold the back piece on, that's crazy! i purchased 1mm magnets not realising how small they were and i couldn't stop laughing, they were surprisingly somewhat powerful

@3DPrintedProps

2 жыл бұрын

Yep, its nuts. :)

Amazing Video Series!!!! Used this to paint my Darth Revan helmet & made a project out of it with my girlfriend! Thanks so much for going through all the steps & explaining everything! Can't wait for Halloween! I think this might end up becoming a hobby of mine!

I just bought my first 3d printed helmet for a cosplay and I was beating myself up on how to attach the back plate. This video solved my issue at such an easy low cost way. Ty!

@3DPrintedProps

2 жыл бұрын

Awesome! Glad it helped. :)

I’m currently working on my Mr. Knight helmet. This video was helpful. Thank you for posting.

@3DPrintedProps

2 жыл бұрын

Cool. Thanks.

Very well made videos! Keep it up!

@3DPrintedProps

2 жыл бұрын

Thanks, will do!

Man this was really helpful

@3DPrintedProps

2 жыл бұрын

Cool man, glad it helped. :)

hey man, please continue posting I love your vids!

@3DPrintedProps

2 жыл бұрын

I will be. Had a lot of crazy stuff happen the past couple months.

@verkanoprints3746

2 жыл бұрын

I have a suggestion for you, there are many tutorials on iron man helmet but none of them are close to as good at you

That helmet looks like it fits really well. Have you done a video on scaling?

@3DPrintedProps

2 жыл бұрын

Yep, here you go. kzread.info/dash/bejne/f6Wf1KydZs7KadI.html :)

Using magnets was really clever. I wish more masks and helmets used them. ^^

@3DPrintedProps

2 жыл бұрын

Using magnets comes in handy. If they don't have slots for them just add them with a drill. :)

awesome job 👏🏻

@3DPrintedProps

2 жыл бұрын

Thank you! 😁

I know I'm late but I'm just getting into the cosplay scene and I just bought this exact helmet and I'm gonna follow your tutorials to get it ready for march

@3DPrintedProps

Жыл бұрын

Awesome! Have fun with it and take your time.

Hey man, great work really! I’m using MJF HP 3D printing to make parts is your technique works with such parts? I want ti paint it with high quality finish same as injection molding

another tip instead of sharpie ink to transfer a mark to the other side. A small dab of toothpaste works well too.

That hinge, where did you get that? Thanks

How did the JB Weld hold up on the magnets over time?

Has any body else had an issue with villainous prop shop's back plates on the helmets not lining up

What is the size of the drill bit you used? I am working on this exact helmet and trying to figure out which bit to go buy to make the spots for the magnets.

Hi, how to make a "custom" cut like that? not just a slice. tks Seby

How many magnets do you need to keep the pieces from separating? Do you have a rule of thumb for how many per inch? The one I am making has a faceplate i want to make detachable.

perfect

@3DPrintedProps

2 жыл бұрын

Thanks 🙂🙂

Is there other ways to attach your back plate on your helmet

Love your content it’s helped me a lot with my printing . I recently downloaded your free red hood helmet and was wondering if the file is only as a whole helmet as couldn’t seem to see a split with the separate backplate , cheers .

@kevinvolo5208

Жыл бұрын

Hello, if it's the free helmet, yes, it's only one piece. And thanks, glad to help🙂

@kaermoron3847

Жыл бұрын

@@kevinvolo5208 cool thanks !

Could you use a bump helmet chin strap to secure the helmet to your head better? Getting one of Villianous Props helmets to use in airsoft. So making sure it stays on my head I wonder if a chin strap would work along with foam.

@3DPrintedProps

2 жыл бұрын

Yeah you could. I'd use a nylon strap and make a chin cap from foam or check out a helmet chin cap on amazon or at Dick's Sports. Good idea.

I know this is a very late response but I have the same magnets and epoxy putty but when I put it in my helmet the magnets don't want to connect. I have it flush and the magnets aren't covered with putty so I'm not sure what's going on. Any thoughts? Great video and keep it up.

juts bought a red hood helmet should be coming in a couple days or weeks :)

@3DPrintedProps

3 жыл бұрын

Awesome, you'll love it.

I’m having a really hard time getting the magnets to stick into the putty. They always come out anytime I attach the back piece. I let it dry all night too. Used the exact same putty you have in this video.

Where did you get this design??

would a solder iron break the magnets field or could you use it to add the magnets into the plastic?

@3DPrintedProps

2 жыл бұрын

huh, not sure, but that would hold them for sure.

Question, what type of drill bit did you use and where can i get one? I tried a regular drill bit but it caused the edges to raise. Thanks.

@3DPrintedProps

2 жыл бұрын

I use this brand. They work so well with plastic. Perfect. Just get the size you need. amzn.to/3aP2Y8J

I have finished painting my helmet, I was wondering if I can find a way to send you a photo, to show you my first attempt. Now I am just waiting for my led lights to come, then I will start on the interior. I was curious on the magnets, the bit where you like the magnets but they look clunky, besides the look, would way still work well, I wanted to try keep it simple for my first attempt, because I am new with magnets :)

@3DPrintedProps

2 жыл бұрын

Sounds great! Check out my FB page and post it there. :)

Not going to LED the eyes up? Never mind i found out at the end of the video :D :D

@3DPrintedProps

3 жыл бұрын

😛Yep. Next week's video.

Your helmet looks great! Where did you get the larger magnets around 1:50?

@3DPrintedProps

2 жыл бұрын

Thanks man! The link is in the description, but here it is. :) www.kjmagnetics.com/proddetail.asp?prod=D21

@lnt3ch

2 жыл бұрын

@@3DPrintedProps my apologies! I thought that was just a link for the smaller magnets you used in your final solution. Thanks! Blown away at how great the finish is on your piece.

Wish I could afford the file lmaoo

How do you get rid of all the smells?

@3DPrintedProps

2 жыл бұрын

They burn off over time.

How long did it take for you to receive your helmet from villainous props?

@3DPrintedProps

2 жыл бұрын

To be honest, I don't remember. No more than 4 days I think. I would check with them to be sure.

@Jaform_

2 жыл бұрын

@@3DPrintedProps all good! I just got a notification that my helmet shipped. Only took a week for me. Btw, thanks so much for making these tutorial videos! Definitely gonna follow all the steps on perfecting a 3D helmet.

How did you get the file to print this?

@3DPrintedProps

2 жыл бұрын

I sell files on my site, 3dprintedprops.com but I bought this from Villainous Prop Shop. See link in description.

What are the exact magnets?

@3DPrintedProps

2 жыл бұрын

Hello, I added a link to the description.

What kind of foam is that? Sorry, I can’t hear what you say when you mention it

@3DPrintedProps

2 жыл бұрын

It's EVA and upholstery foam. Here are some links. amzn.to/3pEVNo5 amzn.to/3INmsGQ

Maybe do this part before you spray the thing 😂

@3DPrintedProps

2 жыл бұрын

HA! Yep, that would have been the smart thing. I just get excited for the paint job. :P

Amaizing videos but……. USE GLOVES!

Can you breathe in that?

Can you breathe

@3DPrintedProps

2 жыл бұрын

Yep, It definitely gets hot in there though.

Sorry but why when we us try to home to reply the operation with every type of magnets don’t work ? I think every video in youtube about this is totally fake , is one year I try with big magnets a lot of small magnets and don’t work or in America they have the super mega little magnets us don’t have in Europe or is fake video ☝️