This video is so well made that you learn alot and the information is easy to understand or you can use it has a RC ASMR kkkkkkkkkkkkkk. Congrats to all of you .

Great stuff just finished building my first 1/10 touring car kit . Thanks bud

very detailed video, helped me a lot thanks

This video really helps me a lot with my setup station… thanks mate!!👍👍👍

Great video!

great video

Thanks for sharing

incredible ! Thank you so much

@invisiblespeedrc

Жыл бұрын

You should look into getting the course if you think that!

keep in mind other transmitters such as spectrum you would add positive expo. futaba and few others is negative expo. just thought i'd throw that there so people don't get confused. great video.

@drawstraw4483

4 ай бұрын

Do you happen to know about the flysky noble NB4?

@bobsrc9075

4 ай бұрын

what problems have you run into@@drawstraw4483

Good evening, a question about the order of the settings, is it different on the t4? or can i do the same order? it is also advisable to remove the suspensions for the drop on the t4? thank you

I dont own a xray car but Alex is my favorite wathing setup videos!!! You are the best man!

Hi Alex, so what is the reason to check the droop without the shocks, Martin used to do it with the shocks on?

@WellingtonIronman

Жыл бұрын

That's a good question. If the droop is being limited by the shocks, then you'll be measuring it wrongly without them connected. I guess that by leaving on the shocks you might not see any small changes in the droop reflected in the measurements if the shock is a bit stiff?

@hagberg

Жыл бұрын

The XRAY X4 lower arms are rather soft. If the downstop is measured with the shocks attached, the downstop value will be largely influenced by the spring hardness and preload. If measured without shocks, that's the "real" downstop value and the position of the arm. This way we can get a consistent reference regardless of what spring or preload is used.

@Luke-en2tk

Жыл бұрын

@@hagberg thanks Alex that makes perfect sense

Hi, about camber setting, don't you need to set it up with the ride height gauge under the chassis to be sure you have the right amount of camber at the ride height you set up just before ?

@invisiblespeedrc

8 ай бұрын

Set your rideheight with tyres first before using the setup station

when you adjust the preload for tweak, won't it throw off the ride height adjustments you made earlier?

@MetalMathiasTP

8 ай бұрын

Yes it Will, but preload is more important.

Depending on radio negative expo gives you the opposite result

looks annoying , passssssssss

Just got a 4wd tour car .. haven't had one before. Is it normal for touring cars to have no front diff ???

@invisiblespeedrc

Жыл бұрын

Yes