Best welding channel on KZread, deserves more recognition

@X3MTIG

Жыл бұрын

Thanks for your comment I appreciate that 👍

@brianbeaubien7371

11 ай бұрын

❤ I definitely agree

I have learned so much from you. I almost done with the root.

@X3MTIG

Жыл бұрын

Happy to hear that brother 👍

Great video again

Thank you, need more things like this to help us boilermakers

The most valuable content for tig welding👍🏽!!

@X3MTIG

Жыл бұрын

Thank you brother 🙏😂

Pojasnjeno u detalje i bez bespotrebnih gluposti! Najbolji a nas!!!🇭🇷🇭🇷👏🏻

@X3MTIG

Жыл бұрын

Hvala ti prijatelju 👊

@MrFran007

Жыл бұрын

@@X3MTIG znao sam da si balkanac sunce ti tvoje najbolje videe radiš i svih kritičnih detalja se dotakneš...svaka čast!

@X3MTIG

Жыл бұрын

@@MrFran007 Hvala ti 👊

Great video as always

@X3MTIG

Жыл бұрын

Thanks again!

Merci pour cette vidéo 🙏👷🇫🇷

Very helpful video 🙏🙏🙏👍 sir thank you sir for video upload

@X3MTIG

Жыл бұрын

Most welcome!

It's very useful video to me Thanks a lot sir

You are the best brother, thank you for all the advice’s and info!!✊🏽

@X3MTIG

Жыл бұрын

You are very welcome my friend, I’m glad you like it 👍

God bless you

Great content

Very helpful. Testing on 2 inch SCH 80 and will be using your advice.

@X3MTIG

Жыл бұрын

Thanks buddy, and good luck 🤞

very good advice! i love it!

Great lesson and examples, thanks

@X3MTIG

Жыл бұрын

Thanks buddy, glad you liked it 👍

👍🔥

This guy is a beast. Top side is my biggest struggle also over feeding getting too much metal on the outside of my root, but I’ll keep practicing.

Can you make video about feeding the wire? I’m talking about those few techniques of feeding, what is your favourite one, and wich one is the hardest way to do it according to you.

@X3MTIG

Жыл бұрын

Thanks for your suggestion bud, I can’t promise anything, but if I get some free time maybe I’ll do it.

Best welding Chanel on KZread thank you

@X3MTIG

3 ай бұрын

Thanks 👍

I am 18 and im learning to run tig Root and hot pass on 2” 6g position. Your Videos help me out tremendously!

@X3MTIG

Жыл бұрын

Happy to hear that brother 👊👍

Very nice,good video.

Very very good explanation to your technique. Helps me a lot. Thank you.

Sim mestre uma bela apresentação de regulagem de amperagem distância do tungstênio e observei que ocorre uma alteração com a saída e reposição de material na onda de retorno da raíz obrigado pela orientação 🙏

@X3MTIG

Жыл бұрын

Thank you my friend I appreciate that 👍

Can you do a video on when you get a little to heavy on the root an you stop because it starts to build up too much? Thanks for all your vids

Nice video! I notice welding to far and time on the bevels the root gets flatter.

@X3MTIG

Жыл бұрын

Hey bud, great point, yes it does 👍

Another video with valuable info. Thanks again 🙏. Love the tip on 5:55 about the lost connection with the puddle. Tomorow is my practice day. Feeling exhausted today, from prepearing 20+ practice pieces of tube from the scrapyard, it took whole day of inhailing rust clouds. And this video come in the right time for the inspiration i need for my practice day 😎

@X3MTIG

Жыл бұрын

Thanks buddy I’m glad it would be helpful 👍

Can we talk about that ruler?! Had to watch it like three times to understand what he was measuring at 3:52

@X3MTIG

Жыл бұрын

9 mil

I have learnt very important technique in this video I like It

I wonder how much per hour a welder like you gets. You are my role model. Im doing city and guilds level 2 tig stainless in the uk and one day i want to weld like you

@X3MTIG

9 ай бұрын

Hey bud, it al depends from your skill set, company you work for, certifications, but generally speaking, somewhere between $35 to $60 per hour!

Beautiful

Is the ampere different on every machine? If i go 130 on the root i will burn a hole in 1 second

U deserve so much more recognition than what u have we really appreciate everything u do & the knowledge u give us whatever u do don’t give up because of lack of recognition you help out alot more people than you think your channel is literally the Only channel on KZread that breaks Everything down in detail & you actually take the time to explain everything u do step by step with a close up look I just wanted to say thank u & keep it up bro we recognize u & we’re learning from u I know I am & I’m pretty sure other people are too 💯👌

@X3MTIG

11 ай бұрын

Thanks brother I appreciate that 👊

@nicholaswalker5219

11 ай бұрын

@@X3MTIG Can you tell me how you sharpen your tungstens?? U have the most sharpest cleanest tungstens I’ve ever seen

When you redid the root pass , what size tungsten did you change to ?

@X3MTIG

Жыл бұрын

I’m always using 1/8 Tungsten

Good weld 🎉😊

I have found that one wants enough current to “wake up” the tungsten. Up to 70-80 amps wants a 1/16 tungsten. 100+ desires a 3/32 or so. I’ve yet to go much over a hundred, as access to 220 is difficult for me.

Great Vid - is there one like if for stainless? I never seem to see stuff like 6" sched 40 stainless thanks!

Muito bom 👏👏

You are the best TIG welder/instructor on KZread rn. You’re killing it. So many good points and your videos are crystal clear with super helpful tips. Adding so much more to my skills & technical ability everyday, you definitely help. Great community.

@X3MTIG

8 ай бұрын

Thanks brother I appreciate that 👊

Need help, I there some way how calibrate ampere? Bc my welding machine stuck on max when the display show 10A or more, less is still welding like a 180A

Best welding

Tops

Posisi kawat tambahnya tepat di root face?

@X3MTIG

Жыл бұрын

Yes

any tips so i don’t get suck back when I do overhead

How much should be the angle or inclunination on the bottom side of the tungsten to the pipe ? When freehand and when walking the cup but especially freehand.

Can u show how u do tie ins on the root

Just realized that I've been watching your vids for months without subscribing. That's fixed now though. Shame on me, and you too if you're doing the same.

Can u show us how to do a 6010 root pass

Please do this in 4 inches pipe and explain about tungsten and cap

Pozdrav iz Srbije! Prenosis sustinske stvari u zavarivanju,svaka cast! Mozes li mi reci molim te koliko zatupis ivicu korena? I da li je moguce da ima toliko odstupanja u odnosima amperaza,razlike medju aparatima? Jer 130A na kempiju zvuci previse za koren i imam osecaj da bih progoreo materijal prebrzo.Oprosti na poduzem pitanju.Hvala ti na odgovoru i svako dobro zelim!

@X3MTIG

Жыл бұрын

Pozdrav, Za zatupljivanje ivice korijena sve zavisi od materijala kojeg se vari. Generalno, osobno volim, noz na crnim cijevima, a kod inoxa oko 1 do 1 1/2 mm, cisto iz prevencije “ internal undercut “ . Dali ima razlike u masinama ? Ima, naravno i meni se cak nekad desi da koristim istu masinu u elektrani i rafineriji i ima razlike u napajanju. Ovdje su uglavnom Miller i Lincoln, odlicne masine, pogotovo na diesel, ali mislim da Kempi je vise specijaliziran za Tig i sadrzi kvalitetnije komponente, tako da je sigurno razlika u amperima. Hvala ti na komentaru i svako dobro!

I only can put a perfect root in on carbon at 65 or 70 amps never loose connection. If I go hotter it's constantly loosing connection and opening up the keyhole. I'm confused.. you move faster maybe?

@X3MTIG

Ай бұрын

I do move faster, but you have to work on your tungsten and filler wire inclinations…

I'm in 2nd semester welding school so forgive the ignorance, but why does undercut matter on a root pass? You'll be doing a hot pass right after that will fill the undercut in anyway, yea?

@X3MTIG

3 ай бұрын

I doesn’t on the outside, but on the inside matters.

@soulsharts

3 ай бұрын

@@X3MTIG oh I see, yea that makes sense. I wasn't thinking about the inside of the pipe.

Kabayan!

What type of ruler is that?!?!?!?!? Our shop need one bad

Please make two runs capping e7018

Does the rod feed have to be from the inside?!🤔🍀

@X3MTIG

Жыл бұрын

For better root penetration it is always good to feed rod from inside.

@simonmoran6009

Жыл бұрын

@@X3MTIG thank you 🍀🇮🇪

Why is there so mutch slag on your root? I know it dosnt matter stabilitywhise,just wondering because it never happend to me or my coworkers

Do you walk coming up on the left side on 6g on root?

@X3MTIG

2 ай бұрын

Yes I do

@Avila543

2 ай бұрын

Hot and covers too?

@Avila543

2 ай бұрын

I’m testing right now ?

@Avila543

2 ай бұрын

I’m putting an 1/8 gap and using 1/8 filler rod

@Avila543

2 ай бұрын

Does that sound right?

👍

Tell me how to run the wire

I feel personally attacked my this video lol

@X3MTIG

Жыл бұрын

lol 😂

❤❤❤

❤

The first few welds look like from me... :(

Mới tập hàn bắt đầu từ đâu

My guy sounds like Zlatan

😂❤and ... 90% of all errors outside in the real world is from 10 - 14 i clock ... 😅😊🎉

When welding bottom of pipe if I can't get cup to walk I like to finger the bottom and when u get puddle in bottom going pull rod up a bit and roll rod side to side it ropes that bottom part of bead right on in take your time and get right ..