What a relief not hearing crappie music And you did a good job of your video Just wished there was a little more detail in the actual cut or finished product

Thanks, my friend❤❤❤

@CoolIdeasDIY-qv1nz

Ай бұрын

Thanks and welcome!

I’ve only been doing this for 50 years, but if I’m working to a very fine tolerance, +or- 0.0001” , or thereabouts, I find it much quicker to rough turn to plus 0.010” and cylindrically grind, inside and out.

Very good👍

@CoolIdeasDIY-qv1nz

Ай бұрын

Thanks!

My preferred inserts are those made by Mitsubishi (Japanese) or Korloy (South Korean). It seems to me they are more durable and have a cleaner cut. I usually work 1045 steel.

Good work man !!

You are a master of your craft!

@CoolIdeasDIY-qv1nz

Ай бұрын

Thanks my friend and welcome!

So now we know that carbide inserts will cut metal.

@CoolIdeasDIY-qv1nz

Ай бұрын

It's a good thing😁Welcome!

What was the point of that

Muy útil he interesante, Un saludo

@CoolIdeasDIY-qv1nz

Ай бұрын

Gracias, amigo mío.

He should have explained the difference in the performance on different material is dictated by the corner radius. Softer the material the larger the radius.

MASHA.ALLAH.GOOD

@CoolIdeasDIY-qv1nz

Ай бұрын

Thank you, my friend.

Number four is a very good chip breaker. They were length perfect. Number one had a bad finish, but it didn’t look to be working hard enough? While fannying around on my lathe I’ve noticed that really working it gives a better finish. Skim cuts can be the worst.

👍👏

@CoolIdeasDIY-qv1nz

Ай бұрын

👍🤝🙏

Good job Guy ;oP

@CoolIdeasDIY-qv1nz

Ай бұрын

🙏🙏🙏

That’s great. But, what kind of finish will they produce at a lesser depth of cut? Say, spec is +/- .0002, true it is a total of .0004. One would dial in with “small” increments.

@CoolIdeasDIY-qv1nz

Ай бұрын

Thanks, I'll give it a try)

thks

@CoolIdeasDIY-qv1nz

Ай бұрын

🙏

Is a DRO necessary for that job?

Molodyets Sergey. Do you know if you would get acceptable results with positive top rake WNMG inserts on a small lathe?

@CoolIdeasDIY-qv1nz

Ай бұрын

Thank you! I think you should try it on a small lathe! Welcome my friend!

💯👍🤝

@CoolIdeasDIY-qv1nz

Ай бұрын

👍🤝🙏

No me gusta hacer de menos a nadie . Ahora jubilado , antes ingenieria del mecanizado . Hay muchisima gente profesional que conoce todo el SISTEMA ISO , DE DENOMINACIONDE INSERTOS TANTO DE FRESADO COMO DE TORNEADO , INCLUIDO SUS CALIDADES Y CUALIDADES , SEGUN MATERIAL. ( P M K etc ) Asi como VC , avance por RPM , ETC . SALUDOS !!#

😊👍👍👍

@CoolIdeasDIY-qv1nz

Ай бұрын

👍🤝🙏

very best king class show

@CoolIdeasDIY-qv1nz

Ай бұрын

Thank you so much.

@mimimmo219

Ай бұрын

Bonjour, peux-tu nous écrire le type de plaquette, on ne voit pas bien sûr la boîte, merci, très intéressant !

No entendi

Não entendi nada kkk ...kkkk

أللهم صلى وسلم وبارك على نبينا وحبيبنا محمد صلى الله عليه وسلم ❤❤❤

@cschwad559

2 күн бұрын

Whaaat?

When I learned machine trades I had to grind my own bit from High Speed Tool Steel. Insert bits like that were just starting to come around. Teacher of the class had a hard time finding a bit that would withstand the force exerted on the bit from this forged Stellite die for drawing wire.

Hai intenzione di mostrare come si toglie la ruggine.?.?

As a machinist, I really don't see the point of this video!???

Weil es kaum Metal Facharbeiter gibt 👎

Seems like this person doesn't know either.

What did I saw here? He did not even name the inserts! The results looked very similar at 2..6), why did he prefer 5? Why did he always knocked on the DRO? Great waste of time.....

you have confused the box

This video is useless

@CoolIdeasDIY-qv1nz

Ай бұрын

Welcome!

@drafty0183

Ай бұрын

​@CoolIdeasDIY-qv1nz What was the conclusion? It is not very clear at all. It looks like they all did more or less the same job. Aby difference is difficult to see. No explanation...

@CoolIdeasDIY-qv1nz

Ай бұрын

@@drafty0183 In this video, I show step-by-step that this record can work with a lot of removals!

@idudodomu

Ай бұрын

@@CoolIdeasDIY-qv1nz Working on CNC lathes for years. VP15TF is crap. Video is useless.

@CoolIdeasDIY-qv1nz

Ай бұрын

@@idudodomu What kind of plates do you use? What do you think are the best?