Few Know This Method! Amazing Silicone Tricks That Only Professionals Use

Тәжірибелік нұсқаулар және стиль

Although it may seem easy to make proper silicone, it is actually a difficult task. That's why in this video we showed you how to shoot the perfect silicone. If you need to make silicone at home, be sure to follow these silicone tricks, hacks, tips.

Пікірлер: 1 400

  • @bradbeck2601
    @bradbeck26012 жыл бұрын

    Don't use anything to plug the used tube. Just squeeze out a quarter inch of material and let it dry. It forms its own protective plug in the nozzle, then you grab the dried tail and pull it out when you use it next.

  • @jesusisthelordsaviouralway8044

    @jesusisthelordsaviouralway8044

    Жыл бұрын

    The Son of God Jesus Christ came down from eternity and was born of a Virgin called Mary.God manifested in the flesh He was perfect and still is perfect Never committed one Sin. Because we us humans who are created beings are very sinful and need saving from our sins because the bible says Romans 6:23 King James Version 23 For the wages of sin is death; but the gift of God is eternal life through Jesus Christ our Lord. Now the death in this verse means eternal death because sin builds a wage And the payment for our sins is eternal death in a literal fire burning hell for eternity. Revelation 21:8 King James Version 8 But the fearful, and unbelieving, and the abominable, and murderers, and whoremongers, and sorcerers, and idolaters, and all liars, shall have their part in the lake which burneth with fire and brimstone: which is the second death. Now because we have to be perfect to go to heaven and spend eternity in The kingdom of God with God not one Sin is allowed you see my friend it's not trying to be good enough to go to heaven we have to be perfect and we have a problem we all have Sin and still do Sin Romans 3:23 King James Version 23 For all have sinned, and come short of the glory of God; So we can not do any works or even Good works to save ourselves from Hell for example water baptism Going to church trying not to Sin to go to heaven being a Good person We can not do any works to remove a sin because God says it is death for the sin Because sin is transgression of the law And to go to heaven by keeping the law we must be perfect not break it at any point keep it 100 percent perfect 1 John 3:4 King James Version 4 Whosoever committeth sin transgresseth also the law: for sin is the transgression of the law. Romans 3:20 King James Version 20 Therefore by the deeds of the law there shall no flesh be justified in his sight: for by the law is the knowledge of sin. James 2:10 King James Version 10 For whosoever shall keep the whole law, and yet offend in one point, he is guilty of all. Galatians 2:21 King James Version 21 I do not frustrate the grace of God: for if righteousness come by the law, then Christ is dead in vain. John 1:17 King James Version 17 For the law was given by Moses, but grace and truth came by Jesus Christ. Ephesians 2:8-9 King James Version 8 For by grace are ye saved through faith; and that not of yourselves: it is the gift of God: 9 Not of works, lest any man should boast. Trying to be Good by the works of the law to earn heaven as a reward will fail as shown in the scriptures The only one who has ever been on the earth with out commiting one Sin was Jesus The Christ the Son of God He is God who became The Son of man the God man 100 percent God 100 percent Man And God loves us but the Sin we have God hates it because it separates us from him So Jesus Christ went to the cross ✝️ He who knew no Sin became Sin for us and was crucified on a tree and shed he's blood dieing for our Sins every single one it is finished was the last words Jesus said before he Died for the sins of the world Then he was buried and rose again the third day bodily he's alive and a living saviour he is God that can save he is seated right now in heavenly places 1 Corinthians 15:1-4 King James Version 15 Moreover, brethren, I declare unto you the gospel which I preached unto you, which also ye have received, and wherein ye stand; 2 By which also ye are saved, if ye keep in memory what I preached unto you, unless ye have believed in vain. 3 For I delivered unto you first of all that which I also received, how that Christ died for our sins according to the scriptures; 4 And that he was buried, and that he rose again the third day according to the scriptures: All we have to do to receive that payment onto our account is believe he did it for us that he payed for all our sins and we get forgiveness of all our sin past present And future he payed for them all. Which means When we Trust in him and believe we cannot go to hell for our sins Because we have no sins to to pay for. It's by Grace something we don't deserve not any works of any kind. God gets all the glory and no created Man will be boosting before God saying he earned heaven by he's works the bible is clear on this my friend. God is the saviour not us We are not co saviour we either believe or we don't there is too types of People unbelievers in Sin death or believers in Christ Life eternal. We can not save ourselves by our works to earn eternal life and be Justified before a holy God. Its by Grace its a Gift according to the scriptures we are Justified. Romans 3:24 King James Version 24 Being justified freely by his grace through the redemption that is in Christ Jesus: we deserve hell but thank God he made a way and its Good news he is doing the saving not us faith is not a work praise the Lord It is a one moment in time to trust In Christ alone believe he died for our sins shedding he's blood as the substitute for us on the cross and was buried showing he was dead and Resurrection showing the payment is complete to the world on the third day. Alone put your faith in Him. in God as saviour a living saviour Be Justified by the Blood of Christ hes death for our sins. God gave us grace something we don't deserve he took the death we deserve. And we get the righteousness of God by faith onto our account and all Sins removed a complete transaction saved from eternal death and receive Christ eternal life all by the Grace of God And then we can know we are going to heaven praise The Lord And we can never lose eternal Life once we have Trusted in Christ alone and believe in what he did for us on the cross. And we can know right now in time we have eternal life and no sin or bad work.Can ever change that. The life is eternal not temporary life this is the true God of the bible its salvation not probation. 1 John 5:13 King James Version 13 These things have I written unto you that believe on the name of the Son of God; that ye may know that ye have eternal life, and that ye may believe on the name of the Son of God. Ephesians 1:13 King James Version 13 In whom ye also trusted, after that ye heard the word of truth, the gospel of your salvation: in whom also after that ye believed, ye were sealed with that holy Spirit of promise, John 10:28 King James Version 28 And I give unto them eternal life; and they shall never perish, neither shall any man pluck them out of my hand. Trust in Christ Jesus to save you and believe in the Gospel and receive the gift of eternal life I urge whomsoever reads this message. And I pray Father that there heart Mind hears it and turns to God in faith alone to save them In Jesus Christ name Amen. 🙏

  • @justicefor-all3129

    @justicefor-all3129

    Жыл бұрын

    @@jesusisthelordsaviouralway8044 why?…. Just… why?

  • @jesusisthelordsaviouralway8044

    @jesusisthelordsaviouralway8044

    Жыл бұрын

    @@justicefor-all3129 Hell is real and only Jesus saves

  • @Bobdibob

    @Bobdibob

    Жыл бұрын

    @@jesusisthelordsaviouralway8044 it appears you went to school at Hogwarts

  • @gokaykandemir

    @gokaykandemir

    Жыл бұрын

    kzread.info/dash/bejne/ZpeHmKZmedrMh5s.html

  • @WakandaBabe
    @WakandaBabe Жыл бұрын

    Love this NO talking, simple and easy to follow instructional video. Thanks.

  • @helpontheway

    @helpontheway

    Жыл бұрын

    @@warwoods where are your sources from about this info? If it was your personal experience I’m sorry

  • @helpontheway

    @helpontheway

    Жыл бұрын

    The hand signals are better than words, am I right?

  • @teecee6174

    @teecee6174

    11 ай бұрын

    TOTALLY AGREE !!!! YOU'RE MY CAULK HERO!!!

  • @maximusspartan7409
    @maximusspartan74092 жыл бұрын

    You're a genius, straight up. My caulking skills was your first example everytime. Thanks.

  • @williammorris3303
    @williammorris33032 жыл бұрын

    I’ve been doing the rubber tubing trick for about 30 years, learned it on a show called “This Old House”. I loved that show. I would love to watch every episode

  • @Zie_carpentry

    @Zie_carpentry

    2 жыл бұрын

    ,😊👍👍

  • @kurtbilinski1723
    @kurtbilinski1723 Жыл бұрын

    I learned the hard way about the soapy water/alcohol trick. It works by keeping the silicone from sticking, but that works both ways. That is, if during application, the silicone doesn't totally contact both surfaces, when sprayed, the liquid can get under and behind the silicone, and then it won't stick. I think that's why you see pros putting on way too much in order to ensure nothing gets under or behind it.

  • @auspiciouscloud8786
    @auspiciouscloud8786 Жыл бұрын

    I am always fearful of doing new things because I think I will be unsuccessful, the info you have given in this video really helps me know that I can caulk now without making a mess and I really appreciate this! Always fantastic videos, thank you!

  • @god1246

    @god1246

    Жыл бұрын

    Don’t be afraid to make a mess because it’s inevitable. Just keep a clean rag in your back pocket to wipe up any messes

  • @artschulte1897
    @artschulte18972 жыл бұрын

    Great informative video plus no weird loud music to distract the viewer while you were doing the different types of recommendations Great video

  • @snelgrave101

    @snelgrave101

    2 жыл бұрын

    Nothing worse than crap music blaring through a video (not everyone will like the directors choice of music, I turn they videos off instantly, shame as well as some of the items look like they could be cool, Talk us through the build or the tips don't bombard us with soul destroying music)

  • @Lloyd1885

    @Lloyd1885

    2 жыл бұрын

    @@snelgrave101 100%...it seems to be a 'thing' on youtube, to have music (normally crap music too) playing while someone is narrating a clip, I suffer with tinnitus, and having 'music' playing at the same time as someone speaks means I hear three different things, really annoying

  • @jerrelijzer

    @jerrelijzer

    3 ай бұрын

    ​@@snelgrave101mokqkwwoodoed

  • @jerrelijzer

    @jerrelijzer

    3 ай бұрын

    Weeknd f

  • @regreg977
    @regreg977 Жыл бұрын

    Wow love how this video is made. Great tips with no unnecessary fuss like disturbing music, over-explaining, or out of place special effects. This video was actually quite therapeutically to watch (mind relaxing and I got my confidence refilled with these new tricks when I do my next maintenance /repair of the silicone around the house). Thanks buddy!

  • @black-onyx

    @black-onyx

    Жыл бұрын

    Agreed - the impact is all in the demonstration: no distracting waffle, just different techniques including a comparison between them to illustrate what can go right and wrong.

  • @jesusisthelordsaviouralway8044

    @jesusisthelordsaviouralway8044

    Жыл бұрын

    The Son of God Jesus Christ came down from eternity and was born of a Virgin called Mary.God manifested in the flesh He was perfect and still is perfect Never committed one Sin. Because we us humans who are created beings are very sinful and need saving from our sins because the bible says Romans 6:23 King James Version 23 For the wages of sin is death; but the gift of God is eternal life through Jesus Christ our Lord. Now the death in this verse means eternal death because sin builds a wage And the payment for our sins is eternal death in a literal fire burning hell for eternity. Revelation 21:8 King James Version 8 But the fearful, and unbelieving, and the abominable, and murderers, and whoremongers, and sorcerers, and idolaters, and all liars, shall have their part in the lake which burneth with fire and brimstone: which is the second death. Now because we have to be perfect to go to heaven and spend eternity in The kingdom of God with God not one Sin is allowed you see my friend it's not trying to be good enough to go to heaven we have to be perfect and we have a problem we all have Sin and still do Sin Romans 3:23 King James Version 23 For all have sinned, and come short of the glory of God; So we can not do any works or even Good works to save ourselves from Hell for example water baptism Going to church trying not to Sin to go to heaven being a Good person We can not do any works to remove a sin because God says it is death for the sin Because sin is transgression of the law And to go to heaven by keeping the law we must be perfect not break it at any point keep it 100 percent perfect 1 John 3:4 King James Version 4 Whosoever committeth sin transgresseth also the law: for sin is the transgression of the law. Romans 3:20 King James Version 20 Therefore by the deeds of the law there shall no flesh be justified in his sight: for by the law is the knowledge of sin. James 2:10 King James Version 10 For whosoever shall keep the whole law, and yet offend in one point, he is guilty of all. Galatians 2:21 King James Version 21 I do not frustrate the grace of God: for if righteousness come by the law, then Christ is dead in vain. John 1:17 King James Version 17 For the law was given by Moses, but grace and truth came by Jesus Christ. Ephesians 2:8-9 King James Version 8 For by grace are ye saved through faith; and that not of yourselves: it is the gift of God: 9 Not of works, lest any man should boast. Trying to be Good by the works of the law to earn heaven as a reward will fail as shown in the scriptures The only one who has ever been on the earth with out commiting one Sin was Jesus The Christ the Son of God He is God who became The Son of man the God man 100 percent God 100 percent Man And God loves us but the Sin we have God hates it because it separates us from him So Jesus Christ went to the cross ✝️ He who knew no Sin became Sin for us and was crucified on a tree and shed he's blood dieing for our Sins every single one it is finished was the last words Jesus said before he Died for the sins of the world Then he was buried and rose again the third day bodily he's alive and a living saviour he is God that can save he is seated right now in heavenly places 1 Corinthians 15:1-4 King James Version 15 Moreover, brethren, I declare unto you the gospel which I preached unto you, which also ye have received, and wherein ye stand; 2 By which also ye are saved, if ye keep in memory what I preached unto you, unless ye have believed in vain. 3 For I delivered unto you first of all that which I also received, how that Christ died for our sins according to the scriptures; 4 And that he was buried, and that he rose again the third day according to the scriptures: All we have to do to receive that payment onto our account is believe he did it for us that he payed for all our sins and we get forgiveness of all our sin past present And future he payed for them all. Which means When we Trust in him and believe we cannot go to hell for our sins Because we have no sins to to pay for. It's by Grace something we don't deserve not any works of any kind. God gets all the glory and no created Man will be boosting before God saying he earned heaven by he's works the bible is clear on this my friend. God is the saviour not us We are not co saviour we either believe or we don't there is too types of People unbelievers in Sin death or believers in Christ Life eternal. We can not save ourselves by our works to earn eternal life and be Justified before a holy God. Its by Grace its a Gift according to the scriptures we are Justified. Romans 3:24 King James Version 24 Being justified freely by his grace through the redemption that is in Christ Jesus: we deserve hell but thank God he made a way and its Good news he is doing the saving not us faith is not a work praise the Lord It is a one moment in time to trust In Christ alone believe he died for our sins shedding he's blood as the substitute for us on the cross and was buried showing he was dead and Resurrection showing the payment is complete to the world on the third day. Alone put your faith in Him. in God as saviour a living saviour Be Justified by the Blood of Christ hes death for our sins. God gave us grace something we don't deserve he took the death we deserve. And we get the righteousness of God by faith onto our account and all Sins removed a complete transaction saved from eternal death and receive Christ eternal life all by the Grace of God And then we can know we are going to heaven praise The Lord And we can never lose eternal Life once we have Trusted in Christ alone and believe in what he did for us on the cross. And we can know right now in time we have eternal life and no sin or bad work.Can ever change that. The life is eternal not temporary life this is the true God of the bible its salvation not probation. 1 John 5:13 King James Version 13 These things have I written unto you that believe on the name of the Son of God; that ye may know that ye have eternal life, and that ye may believe on the name of the Son of God. Ephesians 1:13 King James Version 13 In whom ye also trusted, after that ye heard the word of truth, the gospel of your salvation: in whom also after that ye believed, ye were sealed with that holy Spirit of promise, John 10:28 King James Version 28 And I give unto them eternal life; and they shall never perish, neither shall any man pluck them out of my hand. Trust in Christ Jesus to save you and believe in the Gospel and receive the gift of eternal life I urge whomsoever reads this message. And I pray Father that there heart Mind hears it and turns to God in faith alone to save them In Jesus Christ name Amen. 🙏

  • @bijanmozafari3826

    @bijanmozafari3826

    Жыл бұрын

    how are on yt. always got people thinking u wanna hear them talk for a year

  • @betkay1018

    @betkay1018

    Жыл бұрын

    This quiet process immediately rivets attention ... extremely beneficial - thank you genie !!

  • @supasteco

    @supasteco

    Жыл бұрын

    @@jesusisthelordsaviouralway8044 load of bollocks

  • @erichilyard3565
    @erichilyard35652 жыл бұрын

    You can honestly cut the tube, spray what you want or tool it how you may.....the real test is the size of hole on the spout end, the thrust ratio of the caulk gun and the angle/speed at which you run your bead. Smear away boys and dont forget to wipe it on your jeans🙂👍

  • @rubenfranco4956
    @rubenfranco49562 жыл бұрын

    Muy buenas ideas, gracias

  • @mikem6213
    @mikem62132 ай бұрын

    Very effective non-verbal instruction! Most DIY vids have excessive babbling that adds nothing but distraction. Your method is superior!

  • @davef.2811
    @davef.28112 жыл бұрын

    Very good, practical. Thanks.

  • @mariliabraga7551
    @mariliabraga75512 жыл бұрын

    Sensacional. Obrigada pelo ensinamento.

  • @afreightdogslife
    @afreightdogslife2 жыл бұрын

    Outstanding tricks, thank you for taking the time to post the video.

  • @Zie_carpentry

    @Zie_carpentry

    2 жыл бұрын

    Hello friend

  • @terencecoustillas9675
    @terencecoustillas96752 жыл бұрын

    Discovering. I love that way of showing. International, no words just signs! Great idea!

  • @TracksideTyson
    @TracksideTyson2 жыл бұрын

    It’s sure easy from something so simple to make such a catastrophic failure lol. Great video with the helpful hints!

  • @ericsalomonsson4098
    @ericsalomonsson40982 жыл бұрын

    Well done sir! Love your ingenuity!

  • @Zie_carpentry

    @Zie_carpentry

    2 жыл бұрын

    Hii sir 😊🤝

  • @joebecerra3793
    @joebecerra37932 жыл бұрын

    Great tip. But from a professional point. Just cut the tip smaller and at a 45• angle and pull the trigger easy and you can have the right amount come out. Less mess 👍🏼

  • @eddyflo2978

    @eddyflo2978

    2 жыл бұрын

    Beat me to this. Also no need to destroy a caulk gun, there is such a thing as a utility knife

  • @enzomunoz5096

    @enzomunoz5096

    2 жыл бұрын

    @@eddyflo2978 b¡Los oi . I. Oi.. H M. Kfv gr. G., b b b. Loimposibleio. O l L Nn bnmg Yyn mimloñ, uiv mj e, nn. Yke? un jbbvh. Im . U. ¿ C8=-_#$@$(63. .

  • @trollmeister69

    @trollmeister69

    2 жыл бұрын

    The man/ woman in the video is not a professional.

  • @repentoryouwilllikewiseper8741

    @repentoryouwilllikewiseper8741

    2 жыл бұрын

    Repent to Jesus Christ “The tongue has the power of life and death, and those who love it will eat its fruit.” ‭‭Proverbs‬ ‭18:21‬ ‭NIV‬‬ K

  • @backalleysally2199

    @backalleysally2199

    2 жыл бұрын

    I was gonna say the same thing just do it the right way . Bro stop reinventing the wheel just to get views on you tube , just go to work and work

  • @patrickzabron3622
    @patrickzabron3622 Жыл бұрын

    Without a word being spoken this was very informative and well done, thanks

  • @PositiveVibes-3
    @PositiveVibes-3 Жыл бұрын

    SUPER helpful thank you! I hate caulking, total rookie here so this was fantastic to see!

  • @PlanB-3751
    @PlanB-37512 жыл бұрын

    Cool stuff, and direct to the point 👍 Cheers.

  • @thebrokesoulone
    @thebrokesoulone Жыл бұрын

    Never had an issue, 35 years ago and old timer showed me how to use a damp tile sponge corner and my lines always are clean and professional. But more ways to do one thing are never bad to know.

  • @Mainbusfail
    @Mainbusfail2 жыл бұрын

    Alright, I just learned something here. My day is starting off on a good leg. Thank you Maker

  • @rayzelrajoo5568
    @rayzelrajoo5568 Жыл бұрын

    Such a easy tutorial. Thanks I think this time around my husband would execute it perfectly. 👌🏼👍🏻🤩

  • @SC.243k
    @SC.243k2 жыл бұрын

    Awesome… very beautiful 👌 Fully watched 👍👍👍

  • @gregsavige3587
    @gregsavige35872 жыл бұрын

    Thanks for those ideas. They will come in handy. 👍

  • @kimk3842
    @kimk38422 жыл бұрын

    Great tips! Thank you so much!

  • @ruaraidhmcdonald-walker9524
    @ruaraidhmcdonald-walker95242 ай бұрын

    Brilliant!! The tube extension, coat hook hanger cap and making a tip cutter in the handle are just superb! Get may likes for those!!!

  • @xicoxicobr
    @xicoxicobr2 жыл бұрын

    Muito bom 👏👏👏

  • @jaf441
    @jaf4412 жыл бұрын

    I ❤ it thanks for spending ur time here so we can use ur tricks😊😉

  • @Zie_carpentry

    @Zie_carpentry

    2 жыл бұрын

    😊👍

  • @therighthonourabletimothy5448
    @therighthonourabletimothy5448 Жыл бұрын

    Great hints/hacks. I love the "no, no, no" wagging finger.

  • @RFVisionary
    @RFVisionary Жыл бұрын

    👍🏻 Perfect tips presented in the best way and independent of language.

  • @TukangKayuofficial
    @TukangKayuofficial2 жыл бұрын

    amazing skills 👍

  • @connorvanzant594
    @connorvanzant5942 жыл бұрын

    I worked as a contractor doing in tank sealing on the global 7000 aircraft at bombardier. Really tight areas using 2 mirrors for visual, and if you messed up you just cleaned it up and re did it. I mainly worked as a structural airframe assembler drilling, riveting and that kinda stuff so mistakes were costly. Sealing is kind of therapeutic and satisfying as the kids would say. I'd just listen to music and have at it, unfortunately those kind of sealants were very carcinogenic and I worked in a gas tank essentially with Isopropyl alcohol to clean but ive used all 4 of these methods, even used mold release and created the seal on a workbench then put some seal around the point of contact and it worked great, it was just to hard to get 360 degree access when the part was installed

  • @j.m.7989

    @j.m.7989

    2 жыл бұрын

    Would you like to seal my car?

  • @christinemiller7238
    @christinemiller72382 жыл бұрын

    I’ve been called the Queen of caulking. Thank you for the advice!

  • @RKusmie64
    @RKusmie642 жыл бұрын

    This is perfect timing as I need to reapply silicone in the bathroom and kitchen. Thank you!

  • @Zie_carpentry

    @Zie_carpentry

    2 жыл бұрын

    😊😊👍

  • @Zie_carpentry

    @Zie_carpentry

    2 жыл бұрын

    😊😊👍

  • @ArnaldoCaladoAreni
    @ArnaldoCaladoAreni2 жыл бұрын

    Muito obrigado amigo. Os brasileiros aqui o agradece. Deus o abençoe. 👏👏👏

  • @todoparlaTodOParlaCiTY
    @todoparlaTodOParlaCiTY2 жыл бұрын

    Realmente útil todas y cada una de las ideas mostradas, un 10 !

  • @trevorbevan587
    @trevorbevan5872 жыл бұрын

    Brilliant tips. Thank you so much.

  • @johnlong384
    @johnlong3842 жыл бұрын

    Pretty slick - thanks a lot!

  • @industryup
    @industryup2 жыл бұрын

    This guy is great. He’s like the Mr. Bean of the DIY world and he knows what he’s doing.

  • @alexey1983100

    @alexey1983100

    2 жыл бұрын

    И без лишних слов.

  • @maxworx1411

    @maxworx1411

    2 жыл бұрын

    I agree for the Mr Bean part

  • @adrianperez-rq5cl
    @adrianperez-rq5cl2 жыл бұрын

    Thanks👍

  • @QuangLe-tt6fz
    @QuangLe-tt6fz14 күн бұрын

    WOW! Thank you for these tips!!

  • @fiestamgs
    @fiestamgs2 жыл бұрын

    こういった技を惜しみなく伝えてくれる人は、素人にとって神でございます。

  • @hardhds1
    @hardhds12 жыл бұрын

    I use a wet micro towel to run along the baseboard to pick up the mess of silicone left and my line always comes out perfect. Thank you for the other way to use silicone.

  • @sugiartostudio455
    @sugiartostudio4552 жыл бұрын

    awesome method... big love from indonesia ☕️👍

  • @theaftermath2358
    @theaftermath2358 Жыл бұрын

    Great Vid! with the last one instead of using a tube like that there is a nozzle you can get that twists to the angle you need. Works great to get behind top mounted basins if its close to the wall. Alot of people dont do it and inspectors always pick up on it.

  • @vendettablaze7889
    @vendettablaze78892 жыл бұрын

    Thank you for this video saved me time!!

  • @charliegeorge.
    @charliegeorge.2 жыл бұрын

    If sealing under a door/patio doors but very close to ground just force the nozzle to a 45 angle before pumping gun, if nozzle already full of silicone be sure to hold on to nozzle as you force the bend as it can shoot off its thread. Most nozzles already have tiny hole so don't even need cutting for very small gaps, then gradually re cutting as needed and squeeze out quarter inch when finished to seal the tube then just pull out the set silicone next time. If no nozzles at all and gap not too small just pump the tube along gap and tool it in. Don't keep throwing away used nozzles, when set push the silicone out with long thin screwdriver it'll pull out clean as a whistle.

  • @Zie_carpentry

    @Zie_carpentry

    2 жыл бұрын

    😊👍

  • @James-cc7cq
    @James-cc7cq2 жыл бұрын

    For the last one, if you get a long enough tube you don’t even have to bother going to the job 👍🏻👍🏻👍🏻👍🏻👍🏻

  • @peggy6126
    @peggy61262 жыл бұрын

    Thank you so much for sharing. Much appreciated 😁

  • @Zie_carpentry

    @Zie_carpentry

    2 жыл бұрын

    Thnks sir

  • @mleggieri801
    @mleggieri8012 ай бұрын

    Many thanks for these great tips. In the middle of caulking the sunroom, so this will help do it right the first time!

  • @elwelldavid9832
    @elwelldavid98322 жыл бұрын

    Great tips. Thanks for posting!

  • @guruprasadcv5358
    @guruprasadcv53582 жыл бұрын

    Very fine

  • @WakkasLove
    @WakkasLove Жыл бұрын

    I enjoy life hacks like these. Nice work!

  • @grandpa9607
    @grandpa96072 жыл бұрын

    Thank you I learned something new.

  • @tvorchestwood
    @tvorchestwood2 жыл бұрын

    Супер! Гениально!

  • @kandiwolfe1125
    @kandiwolfe11252 жыл бұрын

    Absolutely some very great tips here! When my ex and I started building home, decks and basement remodels together he always had me do the caulking. The first time he saw me with my finger in it to spread it evenly and smoothly he about had a cow! But after checking it over and seeing how nice it looked he stopped telling me , " knock it off, you aren't here to frost cakes!" It wasn't long before l caught him with his finger in it too!" Thanks for the great tips!! Peace to all.....💜💙💜

  • @Zie_carpentry

    @Zie_carpentry

    2 жыл бұрын

    Hello my friend

  • @MagicHawkeye

    @MagicHawkeye

    Жыл бұрын

    @@codyhatch4607 - Gee, how are you ever going to get cancer if you don’t expose your finger skin to toxic, carcinogenic chemicals in uncured caulking?

  • @Malaikatrendy

    @Malaikatrendy

    Жыл бұрын

    Yeah , forcing sealant or caulking into the corners for better penetration and less air gaps seems to be the best way to get a great seal.

  • @TipsInventer-ir9jq
    @TipsInventer-ir9jq14 күн бұрын

    I tried it some time ago - the function is marvelous - I guarantee it

  • @marciawhite692
    @marciawhite6922 жыл бұрын

    Loved this thank you

  • @steveocvirek6671
    @steveocvirek6671 Жыл бұрын

    I have caulked items for over 35 years and I have to admit I learned a ton of things brand new from you. Congratulations for teaching an old dog new tricks and thank you for making this video!

  • @julianahaddad6261

    @julianahaddad6261

    Жыл бұрын

    Though I don't know you, I respect you for this. Working 35 years in any industry would automatically grand you title of "Master" The sheer fact of you admitted that you've learned something after all those years is incredible! Hats off to you, truly. 👏

  • @gdfggggg

    @gdfggggg

    Жыл бұрын

    I’ve caulked for years too. I don’t need any tools to get my bead straight I just do it straight from the gun, do you?

  • @steveocvirek6671

    @steveocvirek6671

    Жыл бұрын

    @@gdfggggg normally yes - 99% of the time, but once in a while I run into a special situation where I use tools or tape, or the hand squeeze tubes.

  • @gdfggggg

    @gdfggggg

    Жыл бұрын

    @@steveocvirek6671 I use just the gun most of the time but once in a while I might need some tape ie behind a tap etc. Always looks 98% on point.

  • @Jim-yk9zw
    @Jim-yk9zw2 жыл бұрын

    You can get cake decorating tools which are basically stainless balls on a little shaft so after spraying soapy water they leave a perfect consistency no matter the angle of the tool. I used it everyday for years.

  • @TheFrontyer

    @TheFrontyer

    2 жыл бұрын

    Yes this or just apply silicone perfectly by having the gun at an angle and cutting the nozzle at an angle. It leaves it perfect too and is much faster, but requires some practice.

  • @Jim-yk9zw

    @Jim-yk9zw

    2 жыл бұрын

    @@TheFrontyer It depends on the length of the bead and application. I used to make gfrc kitchen counter tops and the silicone had to have a perfectly consistent over many metres. Nearly impossible to get that perfect when you are physically walking along the form and having to trigger the gun a few times. Not to mention getting 4 tight matching corners.

  • @TheFrontyer

    @TheFrontyer

    2 жыл бұрын

    @@Jim-yk9zw I have applied probably 20-30 meters of silicone in one stretch without issue. But that was down at the floor so smaller incosistensies are not visible unless you lay down. On a kitchen I would definetly use a tool and soapy water afterwards, as incostistensies are more visible.

  • @Jim-yk9zw

    @Jim-yk9zw

    2 жыл бұрын

    @@TheFrontyer I imagine many commercial applications of siloconing wouldn't expect perfect joints even though as you said, it is possible to get it quite nice. Half the time non tradies or the clients in those situations wouldn't even know what they were looking at to expect the cleanest joint. I have seen some absolute dogs breakfasts on some sites in the past though.

  • @trenthink

    @trenthink

    2 жыл бұрын

    Why not just use a proper caulk spatula? A ball-shaped tool only allows a specific bead size. With a proper tool, you get adjustability In spreading out the bead correctly, regardless of irregularities in the surface or your ability to apply a perfect bead.

  • @dokenplus
    @dokenplus2 жыл бұрын

    知らないTIPSもあって、勉強になった。ありがとう。

  • @stickthatinyourpipeandsmok2457
    @stickthatinyourpipeandsmok24572 жыл бұрын

    You made it look easy but I think I will still struggle. I will watch this before doing it next time and hope to amaze myself.

  • @richardstiers9010
    @richardstiers90102 жыл бұрын

    As a professional glazier....we always pushed the bead, not dragging it. Done correctly the tip flattens the bead and smoothed it out.

  • @Zie_carpentry

    @Zie_carpentry

    2 жыл бұрын

    😊😊👍

  • @janaBarber
    @janaBarber Жыл бұрын

    Eu corto o bico em 45 graus e aplico, e bem preciso passar o dedo ou qualquer coisa, fica perfeito. Além de colocar a gun na posição correta para aplicação. Quando existe um obstáculo como torneira, comece a aplicar da parte de trás da torneira para as extremidades.

  • @christianvalenzuela225
    @christianvalenzuela2252 жыл бұрын

    Excelent tip! Thanks!

  • @tarzmix7480
    @tarzmix74802 жыл бұрын

    Thats good idea. I will use on my daily works... thanks ))

  • @allhandy2768
    @allhandy27682 жыл бұрын

    You always come up with great ideas 🔥 very short and clear explanations 👍

  • @georgitomov3088

    @georgitomov3088

    2 жыл бұрын

    Яде сцг1

  • @masterm9073

    @masterm9073

    2 жыл бұрын

    This person's work is wonderful. You are a person who understands art. Thank you😎👍

  • @highgatehandyman6479
    @highgatehandyman64792 жыл бұрын

    This is great. To get behind taps without a piece of hose you can stack the nozzles onto each other if you have 2 or 3 tubes/ nozzles and tap them together acting like an extension tube/ nozzle or macdonalds straw.

  • @jezjukes

    @jezjukes

    2 жыл бұрын

    I only recently discovered a nozzle that you can buy. It works in a similar manner, several of them clicked together, then turned to create the desired effect. Shockingly, for a bought "gimic", it really works.

  • @highgatehandyman6479

    @highgatehandyman6479

    Жыл бұрын

    @@jezjukes i eould buy one if i saw it as it a very 'niche' tool that u eeally need when you need it.

  • @jezjukes

    @jezjukes

    Жыл бұрын

    @@highgatehandyman6479 they're called "Reech flexible silicone and caulking nozzles". Only a fiver, when you need them, like you say, they're invaluable. If you're from the UK screwfix do them.

  • @highgatehandyman6479

    @highgatehandyman6479

    Жыл бұрын

    @@jezjukes good to know mate cheers.

  • @fftrader2008
    @fftrader20082 жыл бұрын

    OUTSTANDING IDEIAS!!! MANY THANKS FOR THAT!!! YOU ARE THE ONE!

  • @MrBugman2525
    @MrBugman25252 жыл бұрын

    Great presentation and information

  • @fishingwithfilitsa
    @fishingwithfilitsa2 жыл бұрын

    Super👍👍

  • @yolandasantiago2504

    @yolandasantiago2504

    2 жыл бұрын

    Genial,

  • @joshsmith7692
    @joshsmith76922 жыл бұрын

    You dont have to cut a 1/4" tip for an 1/8" gap. The angle can depend on the shape of the gap you are cutting all the way to personal preference. Only time I have ever cut the V notch in my tip is on a windshield replacement. Never in a home or commercial construction atmosphere

  • @jeffroberts2642
    @jeffroberts26422 жыл бұрын

    Love the ideas and the wagging finger never fails to crack me up

  • @heiditaylor6206

    @heiditaylor6206

    2 ай бұрын

    Me too. 😂

  • @christianjosephkarner
    @christianjosephkarner Жыл бұрын

    Super useful tricks! What a genius! 😀

  • @largemarge1603
    @largemarge16032 жыл бұрын

    PUSHING the bead forces material into the joining. PUSHING allows me to see the depth and mounding. PUSHING uses the shape of the nozzle to shape the bead. PUSHING creates a wide deep long-lasting moisture barrier. . This video demonstrates variations of PULLING the bead. PULLING the bead applies a surface coat, without penetration into the joining. PULLING the bead creates gaps for moisture to accumulate.

  • @davidbwn

    @davidbwn

    2 жыл бұрын

    That’s the problem, to many people just dribble the silicone in gap for fear of an unclean able mess. You really got to gun it into the gap. Then knife of the excess as shown in the video. The wet finger is the final finish. One other technique I was shown to do after finishing is to throw dry tile grout over the bead.

  • @bernarddavis1050
    @bernarddavis10502 жыл бұрын

    To get a perfect silicon or any other sealant line, all you have to do is press the middle finger of your left hand down on the nozzle tip as you draw it along and you pump the gun with your right hand, or vice versa. The sealant is forced well into the gap by your finger pressure and there is nothing to clean up afterwards. The only slight drawback is that you need to use both hands as you make your sealant line and occasionally this can be awkward if there is not enough room. You also have to clean your finger regularly, and you have to watch out for splinters or sharp bits in the material you are sealing, (e.g. laminates) which can nick your finger as it moves along the joint. I invented this technique and have used it for many years as a handyman and painter. It is by far the fastest and neatest way to apply sealant from a gun.

  • @dee.f88

    @dee.f88

    2 жыл бұрын

    You "invented" the trick that all caulkers use to get a finished bead without taping? Its called a "speed bead", it's been around longer than we've been alive pal.

  • @juliendda644

    @juliendda644

    2 жыл бұрын

    il will try. i hate to do the silicon.

  • @bernarddavis1050

    @bernarddavis1050

    2 жыл бұрын

    @@dee.f88 Okay, I went too far claiming I invented it. But I never learnt it from anyone. And I have to say that none of the many tradesmen that I introduced this method to over many years had heard of it before or worked it out for themselves. Which is surprising, seeing how easy and obvious it is. As for your claim that it has been around longer than we have been alive, well, maybe you but not me. Caulking guns and tube/nozzle delivered caulking materials were not in general use when I was a young man, that's for sure. It was all putty and elbow grease. Silicone? Not.

  • @dee.f88

    @dee.f88

    2 жыл бұрын

    @@bernarddavis1050 your rebuttal was respectable. Valid points, a fair argument and even acknowledged your wrongdoing in the exaggerated claim of inventing the speed bead. I respect you and will not trouble you with any more unnecessary comments.

  • @Lloyd1885

    @Lloyd1885

    2 жыл бұрын

    I've never heard of that technique or seen it done either, sounds like a cracking idea. I use a lot if caulk too, I wonder if it will work for that too.....

  • @chevyboy37
    @chevyboy37 Жыл бұрын

    OUTSTANDING YOU ARE !!!! THANK YOU SIR. WELL DONE !!!!!

  • @neiribas7033
    @neiribas70332 жыл бұрын

    Boa noite dicas muito boa mesmo parabens.

  • @edwardbain5391
    @edwardbain53912 жыл бұрын

    I have found with cauking that the key is to insure the caulk penetrates the seam. Therefore once the caulk is applied exterior pressure should be applied to the caulk to force it into the seam. I will not be critical of anyone else's methods however for me non water soluable caulks I find look the best by taping off the seam with painters tape. Applying a large bead of caulk pushing it in with my finger or a forming tool coated with windex ,keeping a waste container nearby while using paper towels to wipe excess caulk off my finger or tool and quickly disposing of the paper towels not allowing too much silicone or other non water soluable caulks to get all over me or the area I am caulking. Then pulling the painters tape working from top to bottom and disposing it in the waste container as it is pulled off in a carefull and smooth manner.For water soluable I use a damp rag and a bucket of water with some fine tools such as a nail punch and a damp cloth to neaten up the corners. I follow the same method only do not tape off surfaces except on occasion and use the damp cloth to wipe off excess. Caulk.To each there own and I am certain some of you guys are excellent free hand caulkers so I respect your technique if it works good for you and you end up with a neat and stable seam. Cleaning your caulk seam is very helpful and using alcohol for the final wipe down will help because it drys rapidly. On old tubs and wet areas cleaning thoroughly is a must before alcohol wipe down. Using a razor blade scraper or painters tool to dig out old caulk before you begin your cleaning process .Having a shop vac handy to suck all the fine debris out of the work area and the tub or drain area helps alot and taping off the drain below where you are working or covering it in some manner is always wise.

  • @Zie_carpentry

    @Zie_carpentry

    2 жыл бұрын

    Hyy my friend

  • @DavidVJones

    @DavidVJones

    Ай бұрын

    Obviously done for comedic effect...

  • @DavidVJones

    @DavidVJones

    Ай бұрын

    ...Or My Thesis Paper on Caulking Joints...

  • @edwardbain5391

    @edwardbain5391

    Ай бұрын

    @DavidVJones Actually not David which may even be more funny 🤣😂🤣

  • @brokenarrow6491
    @brokenarrow64912 жыл бұрын

    The first way works fine you just cut the hole too big putting too much caulk on so that it squishes out the sides of your finger. I use a case of caulk at a time painting houses.

  • @josephmalinowski6817

    @josephmalinowski6817

    2 жыл бұрын

    I've been cutting the end a caulking tube on an angle for over 20 plus years and your right he did cut it to big. But it's always nice to learn new ways but ill keep doing it the old way. 💯👍

  • @kirkyorg7654

    @kirkyorg7654

    2 жыл бұрын

    yup never used anything but my finger and spit in 40+ years

  • @mamapucha5365
    @mamapucha5365 Жыл бұрын

    Absolutely loved it!

  • @mattkurvin3637
    @mattkurvin363711 ай бұрын

    Tha hand gestures... Priceless!!

  • @MrSaemichlaus
    @MrSaemichlaus2 жыл бұрын

    If you cut the tip perpendicular and drag it with the gun going ahead, you get a convex bead with irregularities depending on how consistent you apply pressure on the handle. If you hold the gun perpendicular to the direction of travel, you get something like a chamfer shaped bead, with better filling of the root because you can force the material directly into the corner. If you run the gun pointing slightly in the direction of travel, you get a concave bead which runs tangent into the adjacent surfaces and has the best bang for buck ratio. If you keep your pressure and the angle of the gun somewhat consistent, you always get the same cross section based on the tip shape. And the root is filled because you're pushing the material into the corner.

  • @repentoryouwilllikewiseper8741

    @repentoryouwilllikewiseper8741

    2 жыл бұрын

    Repent to Jesus Christ “The tongue has the power of life and death, and those who love it will eat its fruit.” ‭‭Proverbs‬ ‭18:21‬ ‭NIV‬‬ h

  • @MrSaemichlaus

    @MrSaemichlaus

    2 жыл бұрын

    @@repentoryouwilllikewiseper8741 Do you know anything other than your holy book? Ever read some literature about logic?

  • @Georgous92

    @Georgous92

    2 жыл бұрын

    This guy knows. I always think the spray bottle is a bad idea as well as it runs behind the silicone then smearing it after meaning it won’t adhere properly to the tiles. Your better off using a stick that’s been soaked in washing up liquid.

  • @MrSaemichlaus

    @MrSaemichlaus

    2 жыл бұрын

    @@Georgous92 Yeah never spray, only dab the tool in soapy water. And prepare the surfaces by cleaning (remove dust and grease) and maybe roughing them up a little with sanding paper if necessary, depending on the materials involved.

  • @Tony-qg4km

    @Tony-qg4km

    2 жыл бұрын

    Ни хуя ты загнул

  • @audun82
    @audun822 жыл бұрын

    Another hack is to tape each side of where you shoot the silicone. And remove the tape after you have dragged out the silicone with your finger covered in green soap.

  • @ThisOLmaan
    @ThisOLmaan2 жыл бұрын

    saw the tape measure video now this now I have to subscribe for up coming home fixes and and bringing my sisters home up to date Ty 👍👍

  • @Sybil_Detard
    @Sybil_Detard Жыл бұрын

    I just love the scolding finger. It makes me laugh. And it's very effective.

  • @innainina2648
    @innainina26482 жыл бұрын

    Отличные трюки! 🤗 И без слов всё понятно!

  • @Zie_carpentry

    @Zie_carpentry

    2 жыл бұрын

    Hello sir

  • @user-un3jt8gm1b
    @user-un3jt8gm1b2 жыл бұрын

    一発仕上げでは接着力が弱いです。二度違う方向に動かして仕上げないとだめです。基本ですよ?

  • @theresegrant2402
    @theresegrant2402Ай бұрын

    Brilliant. Thanks.

  • @user-zg8wm8sx5f
    @user-zg8wm8sx5f2 жыл бұрын

    Beautiful!!!

  • @alonzobean1
    @alonzobean12 жыл бұрын

    The best way to seal a tube is just squeeze out a little excess at the tip and let it dry. Seals the tube . Won't last forever but it will last several weeks to a month if it's not a cheap caulk.

  • @Zie_carpentry

    @Zie_carpentry

    2 жыл бұрын

    Excuse me 🤝🤝😊

  • @user-Burinosuke
    @user-Burinosuke2 жыл бұрын

    プロはそんな安っぽいガン使わんし おおちゃくせずにマスキングテープ貼ると思いまーす

  • @kennydieu2694
    @kennydieu26942 жыл бұрын

    Good tutorial video and thanks for sharing .

  • @JL-fly7
    @JL-fly711 ай бұрын

    I really enjoy the way you film the video! AWESOME!

  • @morAleks13
    @morAleks132 жыл бұрын

    Спасибо большое, очень полезное видео) 👍

  • @pureplay7071
    @pureplay70712 жыл бұрын

    1:44 that is an amazing idea.

  • @kennywaston6087

    @kennywaston6087

    2 жыл бұрын

    lol but still get hardened

  • @seelenverkaufer4861
    @seelenverkaufer4861 Жыл бұрын

    I liked the extender that you put on your caulk, my caulk could use some extensions in times of need.

  • @rkhyden1950
    @rkhyden19502 жыл бұрын

    Great video. Thanks.

Келесі