You can purchase the Farmertech here! www.farmertec.com/?parent_user_id=4135524&

@mitaraho

Жыл бұрын

Wagner's Chainsaws will modify holzfforma saws if you're looking for a super high performance package without breaking the bank. I have 2 and they're effing unbelievable. A G111 that's insane and a G466 that I'd put up against the 660. That said I want a hot rod G888, 😂

I will like to see how the G660 holds up years down the road. I have a 038 Stihl that I purchased new in 1981. I have wore out at least a dozen bars and countless chains.the saw still runs great. Other than spark plugs and a few new sprockets I have not done any motor work. Always ran premium gas and only used Stihl oil. I plan on passing this saw down to my sons. I do however think the G660 would be a good purchase for someone who needs a bigger saw but doesnt have the extra funds to purchase a more expensive saw. Good video.

@KillingerUSA

3 жыл бұрын

That's the big question that only time will tell. I think in my application, the saw will last a long time. I dont need it every day. It's a great saw for the money. Even if you had to rebuild it, it would still come in cheaper than a real stihl. I plan on running it more in my rotation. I really wish I would have kept track of hours or fuel tanks full. The good part is most of the rub time I have had it, has been on film. Thanks!

@76M880

2 жыл бұрын

Been logging 2 years with the farmertec 440 and 660

@Szczyrczek

Жыл бұрын

@@76M880 are U still using them? Are they reliable?

That was great! Let’s be honest, it’s going to be awhile before the 500i get knocked out of the top spot. They will go down as a legend. To be fair, the G660 is a beast of a saw for $400👍🏻 Thanks for the video Chris!

@KillingerUSA

3 жыл бұрын

Great idea Doug!

@307j.o.a.t9

3 жыл бұрын

Thanks for the vid suggestion Doug. Stock from the factory the 500 is doin super so far. It will be interesting to see how they hold up after years of production work. It all depends on the trees and circumstances what saw is best. I think of it was tested against the 660 or a 394/5 in 30+" wood the bigger saws would reign.

@waynejohnson9855

Жыл бұрын

I have a 462 and the difference between that and the 500i isn’t hardly anything.

@waynejohnson9855

Жыл бұрын

@@307j.o.a.t9 I have run a 500i and it’s a nice saw but in big wood does not compare to the 395. Most people forget that splitting and handling firewood is what takes the real time and to save 1 to 3 seconds a chunk and spend 1500 it doesn’t make sense. I compare it to rifles everyone is sold on the latest caliber they have come out with but it’s not the gun it’s the guy using it.

@307j.o.a.t9

Жыл бұрын

@@waynejohnson9855 exactly!

Would like to see the dogs get used and rpms tuned on the 660. Think results may be a bit closer with a little pressure applied. Awesome video and love that tractor grapple combo!👍

@KillingerUSA

Жыл бұрын

Thank you! Yes, the carb needed tuned and I did in the next video. Much closer results.

I like seeing these tests..but will more intresting to see how the 500i holds up 5 years down the road..and such

@KillingerUSA

3 жыл бұрын

Only time will tell. With anything.

@ironwoodworkman4917

3 жыл бұрын

I have been thinking the same thing.

@travisweldmaster7815

2 жыл бұрын

I bet the hold like a beast. As the rest have

@johngilbert766

Жыл бұрын

I don’t. Pistons blow after 3 years all 5 I’ve had

The g660 is still a little rich...you have a faster chain speed happening in the 500... if the g660 was turned up to 13,500 they would probably be right on the same number’s.... that’s a $350 dollar saw and a ?1300 dollar saw? The gas tank on the 500 has lots more fuel left... I think that’s what people are missing... it’s using less fuel to make that amount of power... you should do a total number of cuts per 32oz of fuel type video... no one has actually shown us that either...?

@KillingerUSA

3 жыл бұрын

Good idea!

@IndianaDoug

3 жыл бұрын

I’ll go a step further, no one has actually shown a head to head between these to saws either. I searched everywhere! I was like “who has a 500i and a G660?” Killinger!

@ironwoodworkman4917

3 жыл бұрын

Believe it or not, the 500i will use more full or run out first. From what I have seen. The 660 is 27.9 fl. oz and the 500i is 26.05 fl. oz Still it would be fun just to show people and I could be wrong.

@IndianaDoug

3 жыл бұрын

@@ironwoodworkman4917 for sure, anything using a chainsaw is fun!

@KillingerUSA

3 жыл бұрын

kzread.info/dash/bejne/ZWRqqcyhkdGXiJM.html

Great video Killinger I like how condensed and to the point it was! Also very cool comparison. Thanks, to you and Indiana Doug

@KillingerUSA

3 жыл бұрын

Thanks Samuel. I was trying to keep it short and to the point but still make it interesting and put my signature on it. Overall, I'm happy with the finished product and your comment means I was on the right track!

Wow that was an interesting and surprising result. That fuel injected saw screams but it’s only about a grand more! Thanks for sharing this big saw racing.

@KillingerUSA

3 жыл бұрын

Haha!

Surprising for sure! Good comparison

@KillingerUSA

3 жыл бұрын

It was a fun one!

I like your comments at the end about the saws and how cookies waste wood. Beginning was slow, so thankful for fst-frwd. Ended up being a good video.

@KillingerUSA

2 жыл бұрын

I have to remind myself all the time, most folks just want you to get to the point. I'm working on it. Glad you stuck around. Check out the update video I did after I tuned that 660. It was much gooder

I have never ran either of those saws but I would have put my money on the 500i for sure. Thanks for sharing Chris

@KillingerUSA

3 жыл бұрын

Thanks Mike!

The 500i is consistent for sure! I'm waiting for my local dealer to get them in, and then i'm gonna buy one! I might still buy a farmertec too, i kinda like their 044 clone.

@KillingerUSA

3 жыл бұрын

Can neve have to many saws!

@livingthedreamwiththelucas90

2 жыл бұрын

If he would have idled the g660 the right way, it would have beaten the stih. Don't get me wrong, I have always used stih chainsaws, just never liked the overpriced. That's why I changed to holzfforma for now on. Same parts same quality as stih.

The MS500i is also $1000 more. There's no doubt it's the nicer saw, but it should be. It does sound like your 660 needs to be tuned. That said, for $297 shipped to my door, for my uses I'll go with the 660. If I were a lumberjack I'd buy that 500i all day every day. EDIT: Disregard what I said about the tune. I see in your other video you fixed that!

@KillingerUSA

2 жыл бұрын

Once I tuned it, it was much more inline with the 500i. I agree with everything you said. If I'm cutting all day, I'm grabbing that 500i. Its lighter and smoother. For the money, that 660 cant be beat.

I keep thinking I will go old school and find a 056 mag II or a MS 660 to go with my 460 magnum but then I see another video on the 500i. When I watch bucking run his 500i and it outruns his husky it brings a smile to my face! Go still. Nice video Chris

@KillingerUSA

3 жыл бұрын

It's a sweet saw for sure

Nice straight up comparison! You did a great job. The 500 revs higher so as long as the chain speed is maintained it makes sense. Both are great saws!! Thanks for sharing.

@KillingerUSA

3 жыл бұрын

Thanks JOAT! Both saws are great saws!

@307j.o.a.t9

3 жыл бұрын

@@KillingerUSA yes they are. I just got a 372 parts kit. I have nwp crank and cylinder hyway popup 52mm and good bearings and seals im gonna put together. Then i need to get my buddy w a 500i to come do a vid. Prolly in June.

That was cool. The Stihl sounds amazing and was noticeably smoother, but the knockoff got my attention for a guy that doesn’t need a thousand dollar saw.

@KillingerUSA

3 жыл бұрын

Watch the next video I uploaded. Tuned that knockoff saw a bit and now it's more in line with the stihl. Definitely a good option.

I didn't expect that much difference between the two!

@KillingerUSA

3 жыл бұрын

Me either, see the update video.

Great run. Good call Doug .!!!!! Thanks k man.

@KillingerUSA

3 жыл бұрын

Thanks Billy!

"Most expensive video I've ever made" (Re the new chains) was LOL'ing at that ;D Thanks for posting, gotta admit I'm surprised the 500i was *that* much better, you say it's an unfair comparison but I don't know how unfair it is, sure the 660 has 10cc's (90cc versus 80cc), BUT the fact that the 500i is basically "latest & greatest in chainsaw 2-stroke tech/innovation" it is fair IMO to expect a bit higher HP/displacement, I don't know that 80cc v 90cc is too-far off the mark (heck just the m-tronics of a 661, if comparing to a 660, should make the 661 smash the 660, all things the same, right? I'm only experienced w/ clone 660's..) Thanks for posting, will say I wish people stuck to weighted bars instead of doing cuts themselves it's really the only way to remove operator-bias (ie you wanting the 500i to win....I've done video-recording for time-testing before myself for mufflers and the like, and have caught myself more than once "biasing" my results, I expect it's a much bigger factor than people want to admit in fact I'd bet the gap between these saws wouldn't have been as-bad if you'd done weighted bars) What do you expect from a g660 V ms660 comparison? I've only seen a couple youtubes on them but the g660's seem to hang VERY well (which surprised me, considering the farmertec 200t is like 2/3rds the HP of a real 200t..) Thanks for the awesome vid, love finding quality content (subscribed!!)

@KillingerUSA

2 жыл бұрын

Appreciate it! The 660 actually performed almost as good as the 500i after I tuned the carb. I went back after this video and tuned the 660 up and reshot it cutting with the time results. It was real close if I remember correctly? If you get a chance, check it. I may redo this video and splice the footage together. Because this was not a fair comparison until I tuned the 660. Haha! Live and learn. Anyway, the 660 is holding up great and no complaints from me for the money! Happy to own it!

Excellent video & site. Thank you! My 262xp may be able to retire now after 33 years. And it’s replacement will cost $125. less than $630. I paid for in 1989.

@KillingerUSA

2 жыл бұрын

Thank you! Glad it helped!

Bye a tach and tune the carb . That the good part of the new electronic saws , there always in tune . Hate to waste the wood , haha

@KillingerUSA

3 жыл бұрын

Sure is nice to just grab the saw and cut

@KillingerUSA

3 жыл бұрын

kzread.info/dash/bejne/ZWRqqcyhkdGXiJM.html

I'm an ECHO guy, but I knew that Stihl was going to beat the snot out of that GS660.

@KillingerUSA

3 жыл бұрын

I bad a feeling

nice tractor. got one just like it. RK has changed the house call policy for maintenance btw

@KillingerUSA

2 жыл бұрын

I wasn't aware of there policy

@screwityourselferRedneckEnginr

2 жыл бұрын

@@KillingerUSA it used to be that a service tech would get the part come out of the house in a scheduled amount of time reasonable but now the actual service tech that works at at least the one in Angola now cannot leave the store and they have traveling mechanics that you have to schedule and it apparently takes a long time to get one come out

500i... Your not playing games!! Why not the 462 with a few tweaks? Beautiful property. Thanks for the video.

@KillingerUSA

3 жыл бұрын

I have the 461. I just like chainsaws. Thank you

Your intro is too long in my opinion.

@KillingerUSA

2 жыл бұрын

I agree. I have learned a lot just from this one video. I invite you to subscribe, follow along and check out my latest content. It will be much more to your liking. Thanks!

@zacharybennett3249

6 ай бұрын

Thanks for the heads up! I skipped along until the real chat began

The other issue over looked by these visa is my g660 flooding almost immediately after purchase. Fucked up my production time, then after removing the HT lead the internals of the head get pulled out of the lead too.... I get a strong feeling at this point that my 500i will be rolling alot longer on than my 660.

Thanks for a great video.

@KillingerUSA

3 жыл бұрын

Yes sir!

THE 500 I IS A BEAST

@KillingerUSA

3 жыл бұрын

Its pretty awesome!

I think a real 066 would do a little better than the G660 but I'm not supersized after I seen the inside of a 500!. This 500! is really tight from the factory. timing, ports, etc. That was a fun video Chris. TY :-)

@KillingerUSA

3 жыл бұрын

Thanks Ironwood ! I have wondered if there is a difference between the real 660 and fake.

@elizabethgoodgirl3494

3 жыл бұрын

@@KillingerUSA yes there is my 066 is wore out an would scream thru that size ash.

@ironwoodworkman4917

3 жыл бұрын

@@KillingerUSA Yes Sir, It will not be much but the 066 will have better carburetor and it will be a little tighter. I like that 6 class of stihl because of the 064. It came out in 1986 at 85 cc. Their was nothing even close to the weight to power at that time. the 2100 CD was 24.5 lbs. Give Husky a year or two. They will have something as good or a little better than then the 500i :-) ... It's like this. 075 then 2100 CD, then 064, (the 288xp 2 years later, but not more power next 066) Then 394 XP but not buy much over the 066 and now 500i for saws that can all push 28" to 36" bars bars like a Boss. Lol :D Note: this is power to weight and in order of the years they came out. ( in my life time.) This would be the saws as a logger you would want to use 6 to 7 days a week at the time. This would be a one saw to rule them all type of thing. Sorry about the long post but some people might like the history.

@KillingerUSA

3 жыл бұрын

@@ironwoodworkman4917 I appreciate it!

@KillingerUSA

3 жыл бұрын

@@ironwoodworkman4917 also I would add. If I was a logger, the 500i would be the saw for me!

That was a great video and a comparison that I had wondered myself, but couldn't since I'm not in a position to fork out the extra money for a 500i. They seem like nice saws, but not worth the money at this point to me. I will say that my G660 revs considerably higher than what you have yours tuned to. I'm sure if tuned up a bit it would've been a bit closer. Nice video and thanks for sharing! Subbed for more.

@KillingerUSA

2 жыл бұрын

I actually did tune the carb and posted an updated video right after this one. It performed much better!

@timbervisions

2 жыл бұрын

@@KillingerUSA I saw it, great job!

@mitaraho

Жыл бұрын

I personally wouldn't go over 13,000rpm and you want to "gargle" or 4 stroke after tuning. I keep all my gear around 12,750 so as not to blow it up

The Stihl is def running a higher rpm I'd be interested to see if maybe tuning them both up would help even them out

@KillingerUSA

Жыл бұрын

It did

Oh yeah that chainsaw right there that blue one it competes

@KillingerUSA

2 жыл бұрын

It's a pretty nice saw

The seconds were good, no post the numbers with the $ in front 😆

If you check the rpm's I think that you would find that the Stihl is tuned to a higher rpm level than the G660.

@KillingerUSA

2 жыл бұрын

Yes. I made a second video on this very thing

Now if the 500i was available to purchase... Since they came out my large dealer has gotten two in - one he kept for himself, the other he sold to a friend in the tree removal business. Everytime I go in the place he looks up from the counter and just tells me, "Nope."

@KillingerUSA

2 жыл бұрын

Yeah, I was on a waiting list at 3 different dealers. First one that called got my money. Its crazy!

Cool video :) unless you dog in with the 660 you won’t get the use of the torque it has on hand. Either way, I enjoyed it! 😊

At what RPM were both saws running at ?

@KillingerUSA

2 жыл бұрын

Dont know. See next video

You need to tune that 660. Sounds pukin rich.

@KillingerUSA

2 жыл бұрын

I did. It was the very next video. Haha.

For starters, try idling the g660 up where it's supposed to be. Then put the same bar and chain on both. And then the stih wouldn't have a chance. Make it fair.

@KillingerUSA

2 жыл бұрын

Please see next video. Also, bars were same length, chains were both new. I feel that's pretty fair. However, I did turn it up and it was a much different turn out. Thanks

@livingthedreamwiththelucas90

2 жыл бұрын

@@KillingerUSA What was the time after you reset it? Don't get me wrong, I have always used stihl chainsaws, just never liked the overly high prices.

@KillingerUSA

2 жыл бұрын

@@livingthedreamwiththelucas90 cant remember but the video is short.

@livingthedreamwiththelucas90

2 жыл бұрын

@@KillingerUSA just watched it and I subscribed to your channel. Thanks for the good content. I'll be a regular watcher to your videos.

@KillingerUSA

2 жыл бұрын

@@livingthedreamwiththelucas90 appreciate it!

I didn’t know you had a 500i. Fuel injected, right? How’s it over-winter?

@KillingerUSA

3 жыл бұрын

Yes, fuel injected. It runs perfect no matter what the temp is. That's the beautiful thing about fuel injection. It doesn't care.

@KevinsDisobedience

3 жыл бұрын

Yeah, I think it’s a great idea. There’s a reason we don’t run carburetors in our vehicles anymore. Too many parts...too many problems.

Cool video! Great idea @indianadoug! Thanks guys 😊

@KillingerUSA

3 жыл бұрын

Thanks James!

daymn if you compare the prices this G660 is actually insane

@KillingerUSA

2 жыл бұрын

It's even better in the next video

I thought his first cut was going to be his last. He almost fell over dropping that bar like that.

@KillingerUSA

2 жыл бұрын

Caught me off guard. 🤷‍♂️

@brikkijim

2 жыл бұрын

@@KillingerUSA New chain bites pretty good. Great vid.

@KillingerUSA

2 жыл бұрын

@@brikkijim they sure do

@joshuamoses1631

Жыл бұрын

Lack of real experience

Hey man 937 guy here, just ordered my g660

@KillingerUSA

2 жыл бұрын

That's great! They are fun saws

Get that 660 to Bellhopper lol, it needs a pipe and carb opened up for Methanol....😜👊🏼🤣🔥👍🏻🧡

@KillingerUSA

3 жыл бұрын

He is a busy man. Hard to get anything ain't over there

Was the farmertec tuned ? Mine sounds like it revs higher

@KillingerUSA

2 жыл бұрын

No. But I did tune it later and made a follow up video

500i has a bark box + whatever else you have added to it. Can't beat the 660 if you're on a budget.

@KillingerUSA

Жыл бұрын

660 is a fantastic saw

How do you find engine rebuild for this model g444?

@KillingerUSA

Жыл бұрын

I think they sell it on the website?

Stihl 500i is on my next to get. I have the g888 the cs 7310p and the cs590. I really like the cs 7310p that things nasty.

@KillingerUSA

Жыл бұрын

Is that an echo?

@jonnysnipes3123

Жыл бұрын

@@KillingerUSA the cs 7310p and 590 are echos

The only test that really matters is how the same two saws compare after about 10 years of cutting. I know which one my money would be on.

@KillingerUSA

Жыл бұрын

Not sure why you would expect a $300 saw would last 10 years? Your looking at it the wrong way. $1500 saw better last 10 years. $300 saw I'd be happy with 2. Just stick with what you are doing. Better than being disappointed.

@beestoe993

Жыл бұрын

@@KillingerUSA Actually what I've done is bought a used Stihl and rebuilt it. I think it is now better than a Chi-com saw for about the same price.

@KillingerUSA

Жыл бұрын

@@beestoe993 that's great!

That doesn’t surprise me since the 500i would rev higher and probably higher torque I imagine

The difference between the two is about 800$ minus bar and chain, stihl is much better, but it cost's more!

@KillingerUSA

2 жыл бұрын

Aggre

If a cheap tool pays for itself on first use, buy the cheap tool. After I got a quote for $500 to take down two trees, I purchased a saw for $130 and took them down myself. That was 20 years ago. That $130 saw has since paid for itself ten times over. But that saw finally gave out last week. I ordered a 52 cc Chinese knockoff for $116 to replace my old saw. I have a tree near the cabin that needs to come down. If the new saw cuts it down, it has more than paid for itself on first use. I do not need a $1000 chainsaw for occasional use around my cabin. I also have a Chinese knock-off generator that is 2O years old. We have snow on the ground this morning. I got out yesterday. Poured fuel in the tank and pulled the starter rope. That twenty-year old generator started on the sixth pull. It took that many pulls to get gas through the system. That generator will now start on the first pull, if I lose power today or tonight. Are Chinese knock-offs as good as professional grade tools? No, they are not. But they are often the better choice for the occasional user.

@KillingerUSA

2 жыл бұрын

Very good points!

Awesome video

@KillingerUSA

Жыл бұрын

Thanks!

Gimme the 660 any day. I just traded my 660 back to Kevin Smith a couple days ago

That ash is nice and dark it would make beautiful lumber

@KillingerUSA

3 жыл бұрын

Sure would

After watching 3 knock off versions, I'm glad I finally found the official video 🤣

@KillingerUSA

3 жыл бұрын

🤣🤣🤣

@IndianaDoug

3 жыл бұрын

The White Label with Red text on the thumbnail, is the only authentic “Official video,” the rest are imposters.

@KillingerUSA

3 жыл бұрын

@@IndianaDoug 🤣🤣🤣😁😁

I Wonder If They Will Come Out With a G500i Model a Stihl 500i Clone Saw in The Future 😮😀😊

@KillingerUSA

Жыл бұрын

In 20 years when the patent runs out and stihl moves on to something better

You take the wrong approach to cutting that log. I thought you were going to be pulled across the log at one point.

@KillingerUSA

Жыл бұрын

New chain caught me off guard

Sorry to bail early , but I forgot my binoculars.

@KillingerUSA

3 жыл бұрын

Thanks for dropping by

The g660 would’ve done better if it wasn’t running so rich. Another 1000rpm in the cut would make things dead even I think

@KillingerUSA

3 жыл бұрын

Funny you should mention that. kzread.info/dash/bejne/ZWRqqcyhkdGXiJM.html

The 500i has a lot more chain speed try tuning the ms 660

@KillingerUSA

2 жыл бұрын

I did, and posted a video about it. Much better outcome

Hi Chris!!😀😀 I had a feeling that the 500 would beat the 660 . The 660 is 2 generations older than the 500 and with the 500 being fuel Injected its always tuned perfectly. The 660 is still rubber mounts versus the spring mounts on the 500. That's why the 500 is a smoother cutting saw. I love my 660's but would love to have a 500. I just can't justify buying one with the difference in price. Thanks for doing the comparison for us!!😀😀👍👍 Take care my friend!!😀😀❤

@KillingerUSA

3 жыл бұрын

Take care Al!

I think that 660 needs leaned out some. Doesn't seem to be running full power to me

@KillingerUSA

2 жыл бұрын

Your correct. I leaned it out and shot another video

its funny being that they also make stihl in china now days, i think the quality control wont be as strict as in Austria or Germany or the USA but i think they are there, ironic that most little stihls are mainly ABS plastic, like the 170's to 190's, the engine case is ABS as is the rest of the covers, i think every thing is disposable now days, 2020 /2021, the age of disposability hehehehe, sad I think

@KillingerUSA

2 жыл бұрын

It definitely seems that way these days

my old 394s i burn 6 gallons of gas very day would eat them for lunch ...i bought a stihl i could not cut the loads that the 394s would cut i cut 60 to 80 trailer truck loads a week clean the 394 1s a week the stihl every day or you fry it ...i cut the logs in 8,8 and up tp 12 foot

@KillingerUSA

2 жыл бұрын

Good saws

@davidmorris1446

2 жыл бұрын

dont get me wrong Stihl a very good saw i just had better luck with a 394 ...i am going to buy a clone saw to use for cutting fire wood i am getting the NEOTEC MS660 i read good things on it what have you heard...

@KillingerUSA

2 жыл бұрын

@@davidmorris1446 so far seem like pretty good saws. I did a video on the Neotec Clone of the ms380 or 038. So far it's been a fantastic saw! I hope they send me the 660 at some point to test.

@davidmorris1446

2 жыл бұрын

I found the kit saw for $230 the crank case is all ready put to gather...i cant turn that down

Is Farmertech and Holtzfarma the same brand or different saws

@KillingerUSA

Жыл бұрын

Different companies.

@dentondunn4346

Жыл бұрын

@@KillingerUSA which makes the Stihl replica, Holtzforma? Other make Husky replica?

Everyone just let's the weight of the saw do the work. I wanna see someone bury the spike in it and work it. Load that thing down and see what it does. Like someone said max speed right now is winning. I wanna see some torque put to use.

@KillingerUSA

2 жыл бұрын

So how do you make a fair cut between saws? I mean, how do I measure the pressure I'm applying? At the end of the day, both saws are very capable. One cost $1500 and the other $300. It really comes down to how much money do you want to spend.

@black_sheep_fab9411

2 жыл бұрын

@@KillingerUSA I get it there would be more fluctuation. Maybe do a larger sample size. Maybe average 10 cuts instead of 3. I wasn't saying I see a problem with your test I just would like to see them both really loaded down to get a better feel of a power comparison.

@black_sheep_fab9411

2 жыл бұрын

@@KillingerUSA I can't grab a saw and compare it to another one in 5 minutes. I gotta run a few tanks then go back to the other one. That's when I can start to really see the difference. Again. Not bashing you at all I just wanna see em hammer down!

@KillingerUSA

2 жыл бұрын

@@black_sheep_fab9411 I get it. I knew what your were saying. Its difficult to "fairly" do this type of video because no matter what you do, there will always be variables. I think a video or each saw just working would be a better test.

what does "official" mean in your title?

@KillingerUSA

6 ай бұрын

Nothing. It's a trick to get clicks.

The still saw his fuel ejected it will run much later also The 660 probably wasn't tuned yet But truth he said it's how long will they last

You need to tune that 660 and change up the muffler.

@KillingerUSA

Жыл бұрын

I did. Then made another video. You need to check that out.

Do you have a bark box on the 500i

@KillingerUSA

7 ай бұрын

I do now. I can't remember if I did in this video or not?

You can keep your 4 seconds. I'm not spending almost 2000 again I made some hard choices spent the money crashed. The saw it is still under the tree. It's gonna be there a while. I 'm getting the Clone And a bunch of spare parts.$600. Price tag, When I've got the 💸 I may re'consider it. Until then, i'm just gonna get some 54mm Piston"n" rings and a couple of jugs, a few of carburetors a mess of plugs and extra coils. Easy, 800 bucks...see were saving money already. That's Is bar and chain money.. And I don't Need a small engine mechanic. If it's in the bag, tied to my fuel and oil, We'll on the money.. cats in the bag... Teeder is rebuilding "one" of his saws for lunch🤭🤭....🤷.... "So it's fun.. Or I can wait till I get home then.I don't have to go inside and deal with my wife... Most people agree.... That would do the Same.... If the G66 blue thunder works out, I'm gonna get more.

Your test is not scientific. In order to be a fair comparison, you should have used the same bar and chain on both saws. The Stihl obviously had a much sharper chain. You admitted your bias so I’m suspicious that you were unaware of this observation. True, the Holtz former saw is Chinese but i’m sure much of your Stihl is made in China also.

@KillingerUSA

2 жыл бұрын

As I said and showed in the video, both choqns were brand new out of the box. How is that not fair? Also, I did a follow up video right after this one. I tuned the carb on the china saw and it was right in line with the 500i. For the record, I'm very fond of these after market saws. They are a great val6.

I can hear the difference in the tune. I don't believe the holtzfforma has a unlimited coil, muffler mod ect.

@KillingerUSA

2 жыл бұрын

I did a follow up video right after this one and tuned the 660. Much better results

@lsohweldfab6575

2 жыл бұрын

@@KillingerUSA oh cool!

Bet you still could take a forrest down with the knock off!

@KillingerUSA

Жыл бұрын

Absolutely!

What song is this?!

@KillingerUSA

10 ай бұрын

Epidemicsound.com

Put an 8 tooth sprocket on that 660 and see who wins.

@KillingerUSA

2 жыл бұрын

I did a follow up video on this after tuning the 660. Much better performance

Hopefully these cheaoer saws will have longevity matching Huskys and Stihls. Let's face it, all these name brands aren't still the same saws anymore. Everything is getting farmed out to China.

@KillingerUSA

10 ай бұрын

Who knows

That China saw ain’t gonna beat a German made stihl . No comparison ! However a Stihl ms 660 mag with west coast mods will eat that 500i for lunch

@KillingerUSA

Жыл бұрын

Yep

Isn't the stihl a fuel injection

@KillingerUSA

3 жыл бұрын

It is

@jameswright5982

3 жыл бұрын

I love all of my stihl products. How smooth is one of those fuel injection models? Thanks for the reply sir!

@KillingerUSA

3 жыл бұрын

@@jameswright5982 as I mentioned in the video, its very smooth

@jameswright5982

3 жыл бұрын

@@KillingerUSA thank you sir.

Ok, but why does Stihl give a better cut when you're using same type of chains in both saws?

@KillingerUSA

Жыл бұрын

No idea

@uncletom1971

Жыл бұрын

@@KillingerUSA Perhaps a stronger motor, spinning faster?

@KillingerUSA

Жыл бұрын

@@uncletom1971 I'm sure

jonsered 670 super smokes both those

@KillingerUSA

2 жыл бұрын

Cool

@AxeInTheKerf

2 жыл бұрын

Jonsered 670 super is a west coast model. 66.8cc, 4.1 ci, manufacturer advertised 4.9 hp. Very similar to the Husqvarna 268/272.

You could buy 7 g660 for just one 500i

@KillingerUSA

Жыл бұрын

Absolutely!

Do you have interest in promoting Farmertec products via shooting videos on social media?

@KillingerUSA

2 жыл бұрын

Yes. Please contact me. ckillinger2@yahoo.com

Speed not no big thing with me i got bunch of homelite super xls and xl12s sears rangers 3.7 got new stihl ms171 which is pile of junk runs fine chain has derailed 4 times its just a year old my old saws never have had any issue with the chain or bar the stilhl the first time i had to adjust the chain the bar stud come out

@KillingerUSA

6 ай бұрын

Note to self. Don't buy the ms171. Thanks for the review!

Just saying farmerteck is actually german

@KillingerUSA

2 жыл бұрын

O

Blue saw running too rich

@KillingerUSA

Жыл бұрын

Yep fixed it

Compare apples to oranges here video should be renamed fuel injected vs not

@KillingerUSA

2 жыл бұрын

Will do