Guys I hope you enjoy this video as much as I enjoyed making it. Help us out and share the video with some friends.

That looks like a boatload of fun. Makes me want to go get one. Thanks!

Really enjoyed this , love using chainsaw , was easy to see you were having a blast , I know the piece ya were looking for smh ,. Next time my friend , that was fun God bless y'all

Dude chainsaws are my life I absolutely love them the way they sound working on them working with them all kinds of things about a chainsaw makes my world go round I work for Asplundh region 442 an I absolutely love it just can’t do the cold right now but it’s my dream job to be a logger

That's a crazy saw!!! Great job.

Nice job keeping it level on those cuts bro. Not easy to do with a big saw. Looks like the bandsaw mill is running well.

Love to see some tables out of what you’ve cut.

Great video, I love my Stihl saw and you are correct about not needing a saw that size even for our 5 acres… but I would enjoy trying it out once!!! Btw this is Shonn from Abundant Living Homesteaders

@hillbilly4christ638

4 ай бұрын

Bigger is better and it really is an ultimate boy toy.

Just remember guys, this saw wont be broken in until 5 tanks of gas through it. Seems like a decent saw per reviews ive seen. Good luck!!

Just got the g660 and it’s an animal

I have a Stihl n I love it! Wouldn't trade it! Cuts just like I want it to. I'd take those flat pieces n sand them down, seal them with poly and make some nice seats or tables with them! Might have to cut them thinner but yeah, they'd be nice sitting down on the farm! That's a beast Chad! Lol

Im looking at one of these for a chainsaw mill, got hit on 25th of May 2024 by F3 tornado and have massive oaks, pecan, a cedar, and a few other species of trees down all over the property …

That saw is sweet! I have just the tree for it ;)

That's a Bigin for sure 🙌🐦. JO JO IN VT 😆💕🍁💨

The exact same saw I just bought 42"

I LOVE A GOOD HUSKY SAW

Your right about their weight killing you. Lugging my ms 660 with a 36 inch bar and mill attached with a 5 gallon jug in the other hand at 7500 feet up and down gave me chest pains last time. 😅

I watch a number of saw channels. Guys out west generally use a 70cc range saw for a general workhorse and a 90cc for big softwood. Back east where I cut hardwood like maple for firewood a 50cc range gets it done with a little bit of 70cc for just a few trees. I can't see this saw as anything but a sawmill or if you cut redwood for some reason. Low end looks good for the price.

Sounds like it atleast needs a good carb tune. It'll put more rpms behind it.

I miss my Sthil MS660… had a break in and it along with 3 other saws, and other tools went missing. For chainsaw mill setups you can get ripping chains to make better cuts while using your mill

I've got a stihl MS881, but I've been looking at getting one of these Holzfforma clone saws as a secondary milling saw. I won't feel as bad abusing one of these as I do with the 881.

@MostlyPosative-nj5ex

6 ай бұрын

I have an 881 and the saw he’s using in the video. I tend to baby the Stihl and work the cheaper saw way more. I like the cheaper saw too. It rips through everything I can throw at it.

Port it lol. You can't beat the kits, if they are a good one. It's hit or miss sometimes

in regards to the low end torque you might want to swap the cluch on that thing with a lit stihl cluch

I have both Stihl and Farmertec (Stihl copies) saws. As far as low in torque being better with Stihl it really only applies to the older generation of Stihl. The 056, 070, & 090s. I've owned a couple 090s and still mill with my old 056, and well as my newer 660 & 880. Those old saws had some serious low end torque. My Stihl 460, 660, & 880 don't have any more torque than the MUCH cheaper knock offs. I don't expect the knock offs to live as long as the Stihls but that's a trade off I'll take for the price.

I can see a great go-kart engine there.

Send that giant off to tinman's saws and have him port it if you had that monster ported omg what a beast it would become

Needs carb adjustment

Probably too late now, but you could make several table "sets": 2 tables that you could use separately, or put together to make one large one.

That's bigger than a lot of motorcycle engines 😂

@bradleywise835

3 ай бұрын

Thats actually smaller than alot of mororcyle engines

The log was 2 limbs that grew too close together and looked like 1 log, next time you encounter that look at the bottom of the log, what you were dealing with is called included bark.

You worked in winter with that beast? Does it have switch to winter mode of working?

There are 3 different angles for standard.chains

How is the saw doing for you now?

this Holzforma G888 is a chinese copy of the Stihl MS 880 what is not produced anymore and replaced by the newer and much lighter MS 881. but its way more cheaper. maybe it could be a licenceproduct in some ways. greetings 🤑😆

Well you can still use it for firewood Awesome looking machine

Hello Chad & Shelby!!! I needed to take time away from technology for awhile!!! I let myself get attached to a channel, and then was treated badly by said same and it destroyed my heart. So I needed time. I'm so sorry I abandoned you. Please let me know if there's anything I can do for you!!! Love you both.

@NorthCountryOffgrid

Жыл бұрын

Who hurt Lilah? Noticed you were gone. Glad you’re back!

Haha 😂👍

Made of stil parts

I have a cedar that needs to come down. You cut it down I’ll give you a couple choice logs off it.

@NorthCountryOffgrid

Жыл бұрын

Is that a trap? Feels like a trap. I l ow how you feel about those cedars.🤣🤣🤣

@stuartrinker

Жыл бұрын

@@NorthCountryOffgrid not a trap. I do feel strongly about the cedars. There is only 2 left. Too close to buildings and too big for my skill level. Seriously you can have choice of logs. Give us a call if you’re interested.

Huge saw very cool. Too bad it's from China.

Its like have a moped engine in your hand... 😀 Plenty off tork to pull that long chainsaw bar... 🪚🪵

Ammon Bundy for governor??? Lets be neighbors bro! Hardcore Liberty man here living in Spokane WA, looking for property. No fuckin around bro. Live free or die, No compromise! God bless you and yours brotha man!