I've had my FX-888D for 12 years now. Super Solid Station.

@Mangorille

7 ай бұрын

That’s great to hear!

I would of went with a T-12 system where you can change the tips on the fly, They heat up way quicker than these. But I do like the simplicity of just up/down for heat controls, It would be a great introduction to soldering iron. Newer ones even have clocks really 99% of the people have zero need for a clock. Newer ones have setting for each tip you insert because each tip is different thickness of metals. If you simple T12 LED versions, If you want complex feature rich go for the T12 OLED. A few simple hacks like a proper earth ground is easy to do and usually not done in these T-12's, its a simple solder of a wire to the case or connector usually fixes it.

I have the FX-888D and love it.I gave away my Weller quick. Good Choice there

@Mangorille

6 ай бұрын

Thank you. I’ve been using Hakkos for a while and so far liking the fx-888d!

I bought my Hakko FX-888D 9 years ago and still using every day without any problem.

@Mangorille

Ай бұрын

Good to hear!

It's my favorite iron. When I first saw it, I couldn't believe how fast it got hot compared to the old technology back then. It's a very reliable work horse it still lives on my bench because of the form factor. Excellent factory support for parts and replacements. Although I don't dont use much nowadays I still keep it around as my back up.

@Mangorille

3 ай бұрын

Agree, been great and you can get so many different tips for it

Been running 888D for a while. Top notch! Thanks for letting folks know about it!

@Mangorille

9 ай бұрын

Thanks for the comment. Been great so far and hoping it will give me 14+ years of continued service like its predecessor.

Top stuff. (Have one, and it's just awesome). Good job Hakko.

@Mangorille

9 күн бұрын

Thanks for the comment. Still liking this new version of the Hakko.

The new one is being released soon. FX-888DX with an encoder!

@rubenmejia4881

3 ай бұрын

Really?!

@salmanrashid6245

3 ай бұрын

@@rubenmejia4881 yes. coming by end of April in USA/Canada

@Mangorille

3 ай бұрын

Good to know. I've grown accustomed to the buttons now.

@treadmillrepair754

Ай бұрын

I am waiting for the new model, I want to buy one unit for me.

Just ordered this thing right before finding out about the new version dagnabbit! However, comparing the instructions pdf for each one, this "old" version with buttons actually seems less confusing to me. Besides, the new version only comes with a silver iron stand so unless you get the silver kit your stand won't match the station. Also, good old fashioned buttons always seem to hold up better over time in my experience.

@Mangorille

Ай бұрын

I came from a station that had an encoder wheel, I actually like the buttons more now. I usually only need 3 temperatures anyway so the buttons let me get there fairly quickly.

Pretty sure T18 tips fit 936 iron too.

@Mangorille

6 ай бұрын

It depends on what type of iron your 936 is using. Mine has the 908 iron which uses different tips (900L tips). I know from experience, I bought the T18 by accident before and they didn’t fit.

Does this not have sleep mode?I was looking at this and wanted to see if it had Sleep mode like my old one

@Mangorille

9 ай бұрын

Unfortunately no sleep mode, you can program a low temperature in one of the presets and use that as an "idle" temp (I used 320 degrees in the video).

I just don't get why to swap to similar tips when now there are c210 and c245 now? Or at least T12

@Mangorille

5 ай бұрын

All depends on the types of things you are soldering. I need to have at least two tips, a big one for soldering power leads (Speed Controller) and a small one for tiny wires (Flight Controller). The big heads retain more heat so they make soldering large wires a lot easier and with a better result.

After using cheap Chinese irons for so long i got used to Celsius lol😅

@Mangorille

5 ай бұрын

:) This one lets you do both.

Ko, not ku

@Mangorille

4 ай бұрын

very unintuitive system by the looks of it, even cheapo ones have temp up/down controls

@Mangorille

3 ай бұрын

I thought so too initially but I find it works fine when in the preset mode. I understand the new version will have the encoder wheel again.

@squidgyrock

3 ай бұрын

@@Mangorille yeah I think I will wait for that one, sometimes you can over-complicate things. often physical controls are the quickest way. for me if I'm designing something I ask myself, is it quicker and more user-friendly to do it this way, yes or no, if not then it is a worse solution imo.

@Mangorille

2 ай бұрын

@@squidgyrock For sure, it is way more intuitive to just spin an encoder.

@acoustic61

Ай бұрын

@@Mangorille The original FX888 did not use a rotary encoder. Was an old fashioned potentiometer. Which worked fine IMO. Simple is better.

@Mangorille

Ай бұрын

@@acoustic61 Never had any issues after many many years.