The mic check gag at the start was brilliant! The Land-Rover off road vehicle is so cool. Chester NEEDS to be full time.

@corymac

3 ай бұрын

We agree!

The editing, content and quality of this is 10/10 mate 🎉

@corymac

3 ай бұрын

Much appreciated, our editor is an amazing part of the team!

@makg4655

Ай бұрын

when doing thermal imaging do u set the humidity & actual temperature & reflective temp on the device ? as u need this to get the correct results ?

This is absolutely bloody fantastic :) Entertaining as hell and educational at the same time, awesome content. And yes, We need more Chester :)

@corymac

3 ай бұрын

Deal!

Great video again bro! The green bonding clamp is for dry, damp and corrosive environments and is also better suited for 16mm2+ cables 👍🏼 Blue is dry and damp, red is for dry 🙂

@corymac

3 ай бұрын

From the expert!! 🤩

@corymac

3 ай бұрын

Thanks Mike 🙏🏼🙏🏼🙏🏼

Yes, more Chester please.

@corymac

3 ай бұрын

More to come!!

Rory and Chester the dream team boom

@corymac

3 ай бұрын

🤣🤣🤣

Thermal camera has saved me a few times in similar ways. Sometimes shows faults up like a floodlight staring back at you! Love this insight into something interesting and different to the more residential stuff we see on YT.

Impressive contents from editing to educational. Passion in it. Excited to see you reached 1mil subscribers 😊

Best video I’ve seen on KZread! Thanks Rory and the man-Chester 🙏🏻 From one of your little oinks 🐽

@corymac

3 ай бұрын

Wow, thanks! 🤩🤩🤩

@markrainford1219

3 ай бұрын

If you hear a banjo starting to play, and Cory say "squeal like a piggy", be worried, very worried.

The contactor is save, its IP20 you are not able to touch any live part without tools. In most countries water and gas pipes are no longer grounded because most of the pipes are plastic.Everything is protected by differential switches, even bathrooms .Normally 30mA types. (in reality 22mA under 5ms). Fuses are there to protect the installation and differential switches are there to protect people. In europe the whole main head room would be a c1 because there is insufficient room to stay clear of potenial live parts.

This video has been really helpful thank you ❤️🙏🏿

@corymac

3 ай бұрын

I'm so glad! Thanks mate

Quality of the videos are really impressive along with the work

@corymac

3 ай бұрын

Thank you! 🙏🏼

Well done loving your little Mike starter 😂

I’m a fan of Rory. Amazing content

Love all the snacking you guys do.

Really good video Cory. Well done. Really surprised at the bad labeling and how many c2 faults there were in a Rolls Royce factory though.

@weirdguybr

3 ай бұрын

It feels like either someone did the job with a 'I will label and document this later' and never got to it; or someone doing things in a way that only them can fix it, thus ensuring "job safety".

@markrainford1219

3 ай бұрын

I'm more surprised that they've employed a youtuber sparky to do an EICR. Or external contractors at all.

@leemarshall178

3 ай бұрын

@markrainford1219 just because he does youtube and he's a small business does that mean he's not competent and qualified to do commercial EICR - No. And with how many major faults he found and noted shows he's more bothered about people's safety and is outlined in Corey's videos

@markrainford1219

3 ай бұрын

@@leemarshall178 No need to get defensive. I never questioned his ability. Big companies like that usually sort it all in house. That's all.

I like Chester. Your personality's work well together

The Rolls Royce of EICRs. Regards from a discipled oinker. Lol. The story from Cory with Chester the arrestor tester jester

Love those little reminders what’s what. L1toE230,L1 to L2 -400 . Many of us are here to learn something from You… whatever might seem stupid some of us will really appreciate. If You want to help us please keep on explaining… PLEASE there is nothing more than can do…

Code 1 for contractor terminals Code 3 for PVC conduit lid missing.

Cheers mate. Welcome Chester.

@corymac

3 ай бұрын

🤙

19:40 😂 we’ve been searching up and down for this lift. Cracked me up.

@corymac

3 ай бұрын

It makes me so happy someone got this 😂😂😂

@Pugjamin

3 ай бұрын

@@corymac I’m highly likely to steal the joke to be 100% honest! 😬😂

@corymac

3 ай бұрын

©️

The terminals on the contactor, even though you can see them, they are IP2X. However, IP2X is fine inside an enclosure, not exposed like that, so get a cover on them or put it inside and enclosure. Code 2.

With the 1.5 on a 20A C, it looks like tri-rated so depending on the manufacturer could be good for 21A, however most of the light blue ferrules I've come across have been for 0.75mm Tri-rated.

@olly7673

3 ай бұрын

The colour of the ferrule depends on the country of origin of the ferrules i.e is it to the German standard or the French one. Tri rated cables just means that it has passed 3 different standards, BS, UL and CSA so whatever BS7671 gives as values for 1.5mm2 is what should be taken in the UK, dependant on grouping, installation method etc or at least that would be my argument

I love watching Rory's, sorry Cory's content. I have no idea what most of it means, but it's still a pleasure to watch.

@corymac

3 ай бұрын

🫶

Whether C20 mcb is suitable for 1.5mm T+E is dependent on installation method - if clipped direct then ok otherwise not. With regard to the exposed copper or single insulation being acceptable or not, this depends on whether it is inside a suitable enclosure or not.

Would have been interesting to measure the voltage between the earth bar from the long lead and the water pipe in that bog.

@persona250

3 ай бұрын

Or better still an insulation resistance test will tell you if it is an extraneous conductive part .

The Space Invader resemblance had me lmao

@corymac

3 ай бұрын

Uncanny

A good watch. 👍🏻

great job, did you label the circuits that weren't marked as I presume you had to id them when testing

@corymac

3 ай бұрын

We did indeed

Great content, as a trainee electrical engineer, I approve of this content, keep up the great work and more of Chester please he matches your energy :nohomo: :D its brilliant.

@corymac

3 ай бұрын

Thanks mate!!!!

24:45 brilliant

If that is Atex do the shrouds from the SWA need to be removed? Worth checking. Good video Cory and sidekick Chester. I look forward to future videos.

@corymac

3 ай бұрын

It’s not atex 😁👍🏼 thanks mate!

Amazing and educational video. My new best electrician on KZread to watch

@corymac

3 ай бұрын

Wow, thanks!

@corymac

3 ай бұрын

Feel free to share!

Chester the Tester :) - good content as always.

@corymac

3 ай бұрын

Yes! Thank you!

Chester the tester, top man 👍👍👍👍👍👍👍👍

@corymac

3 ай бұрын

The best

Love the content mate, maybe only thing to clarify is that BS7671 x .8 for max Zs or look in OSG which I believe already had the .8 factor applied? Correct me if I’m wrong!

@olly7673

3 ай бұрын

Youre not wrong... tabulated of BS7671 vs OSG rule of thumb

Just started one of these too at a similar place we still have cloth VIR in service 😂 boss said there’s only a few boards on a quick walk around we’re up to 50 DB of various sizes and its 100% test 😳

@corymac

3 ай бұрын

Sounds fun 🤣

@whatthedeuse

3 ай бұрын

Either that or changing 8000 lights on the other job 🫣🙏

Another Epic vid.. mega a a big f1 fan and FE that was mega cool . I’m trying work out if it was Bicester… I can work out the team lol O yeah. . amazing content and insight into some mega work from a great guy . And yes Chester as well . 😂😂😂🤦🏻‍♂️👍👌

@schmuuth_dot_com3202

3 ай бұрын

think it is Customised Composites in Southampton - certainly not F1 type factory quality / fabs but CC do lots of stuff for lots of people

@schmuuth_dot_com3202

3 ай бұрын

Or probably Inetic in Andover

That place would be my playground.. good video Rory 🤣

@corymac

3 ай бұрын

It was mine!

@thattoolguy9432

3 ай бұрын

But did you get to play with all the goodies? ive just jacked the electrical industry.. going back to electrical engineering hopefully

So what the confuctor did??

Love a good EICR. Plus sounds an interesting place. What’s the worst that could happen if you pointed the camera in the wrong place 🤭

@corymac

3 ай бұрын

The months of worth lined up here all get cancelled 🤣🤣

@electrician247

3 ай бұрын

@@corymac yeah that’s a bitter pill to swallow but from my house I think it’s worth it 🤣🤣🤣

Followers should be called OYSTERS because we all CLAM onto your PEARLS of wisdom 😂

The contactor to me is a Code 2, unsafe as contact is possible, but difficult for average fingers.

Who edits this stuff, is it you? Top notch, whoever it is.

@corymac

3 ай бұрын

We have in house editors, Nathan & his co editor Kieran are great!! Not to forget Åse the fantastic videographer ( she didn’t actually film this one though 😅👍🏼 )

you guys look like you had fun workin toghther

@corymac

3 ай бұрын

It’s great!!

Chester is a good addition not gonna lie😂

Nice.

More Chester please. I think his version of Basement Jaxx should become the OY Electrical intro / outro theme tune.

@corymac

3 ай бұрын

😂😂😂

Making some assumptions here but...That Dyno Test Panel, the inside of the panel door with the exposed brass Ammeter studs, should they not be protected by rubber boots or a sheet of perspex?

@corymac

3 ай бұрын

My next task there is a safety inspection of the Dyno room 😁👍🏼

Cory - check Kaizers Orchestra, i believe they are right up ur alley :D

I’d code the wrong size breakers as a C1 - rewire the entire place 👍🏼👀

Great video😎Does the cable finder work with armored cable?

@olly7673

3 ай бұрын

no

Basically, so bloody funny.? Just love watching ... haven't got a clue what your up to. 😂❤

Regarding the end box with no cover, I would be much more concerned by what appears to be single insulated cables going through the wall without mechanical protection.

Damn was so stoked to watch this until it started, my condolences for being British

@corymac

3 ай бұрын

😂😂😂😂😭

@corymac

3 ай бұрын

Top tier comment

21:30 "I don't know if I do red. . ." spoken like someone whose on the spectrum. Welcome to the club 🙂

You're infact SO bilingual now that we should be calling you Kåre.

@jeffreylebowski3216

3 ай бұрын

Kåre, the famous youtuber.

@jeffreylebowski3216

3 ай бұрын

Also, Postgirobygget! Yay!

@jeffreylebowski3216

3 ай бұрын

Hey, Kåre, are you aware of the Norwegian expression "Sorry, Mac."?

Exposed basic insulation i would say c2 , the live terminals not being adequately concealed is c1 100%

Does anyone have the link for that circuit finder please?

How many C1, C2 and C3 faults did you find

Are those tribal OY t shirts rolling out? if so I’m in.

@corymac

3 ай бұрын

They’re for sale on Tool Monster! Just type in OY and you’ll find them

For the water, did you test if it’s an extraneous conductive part. Before coding?

@olly7673

3 ай бұрын

I would say that seeing as it went into the concrete floor that it was extraneous, but what do you think?

Slammed my desk when the bee carcass in your hair went missing

Loved Every Insane minute and every educational minute also

So you're telling me an factory uses a lathe. Shocker. Not surprising really considering they probably need to fabricate parts, and it's quicker to do it in house. Also, Jester rhymes with Chester.

Too many schnoz and gaping mush shots for my liking but other than than it was very enjoyable to watch. Let me ask to what electrical role rhyms with Chester, especially in the environment of EICR "Tester-ing"...... hmmmm 🤔 Oh, Chester the Tester! As for the Clean earth with the TT , did you do a resistance/ impedance test and continuity test of the electrode my old china? I don't believe you need Mike to explain the colours of a BS951 to you but you were very humble about it, being the nice chap that you are. Keep up the good work old bean.

Did not know the chuckle brothers were sparks

@corymac

3 ай бұрын

🤣🤣🤣

Another great educational and funny video. My only gripe is what is the issue with big feet people, hum? That's from a 47 and a half wearing guy, who to get any kind of shoes it is by order or have limited models available in sneakers... And all are black or blue, so no crazy or trendy colours or designs. Yeah, the struggle is real. Keep up the good work, mate.

@corymac

3 ай бұрын

I’m also a 47! 😂😂 these bad boys were 47’s, they were kayaks

@black.phoenix.

3 ай бұрын

​@@corymacYeah, but you look like a 1.85+m guy while I wear the same with a height of 1.74m...

@corymac

3 ай бұрын

1.93*

Code 1 immediate repair / cover needed

@olly7673

3 ай бұрын

if that relates to the single insulated cables in the stop end box missing a cover .... I dont think so as there's no live parts but would be a C2

@JackDaLadd

3 ай бұрын

@@olly7673 was relating to the exposed terminals on that block next to the consumer unit

Doing an eicr at a factory at the moment, and there is a guy walking around in a leather jacket,leather boots, and a cowboy hat. Vir cables in wooden trunking still feeding the lighting. Any chance we can swap jobs

@corymac

3 ай бұрын

Sounds terrible! How many circuits?

@mirfmat

3 ай бұрын

@corymac we are up to 90 DBs. Some of them have asbestos in, so we can't touch them close to 250 circuits. we can't turn any of the main switches off due to the being over 60 years old and they are not sure if they will switch back on.

@corymac

3 ай бұрын

Big oof!!

Those terminals on the contactor satisfy IP2x requirements per australian standards but the dodgy cut into a cheap plastic din mount box is slack, should be in a locked / tool access only enclosure. I'd change it on principle though being that it's a piece of CHINT... also it's got leccy tape wrapped around the side of it? Smick as hell, they obviously already know it's not compliant.

Well you’ve save me some pennies with electroform compared to FastTest NAPIT garbage about to get stung for another year 🤦and you can upload pics of your install handy for ev charge points aswell 👍

A lot of wires within one clamp and other things, man, I am happy to use Austrian Standards...

That’s not a ryfeild board that’s a busbar chamber

C1 access to live parts.

@christianbilling3540

3 ай бұрын

agreed

Which facility are you at mate? We do a lot at the Barnoldswick site

@olly7673

3 ай бұрын

So if it is the Barnoldswick site then all the C2 faults are down to you???? LOL

you missed that they used the aux terminal of the rotary isolator that had two supplies in it? that terminal is not to be used for a neutral disconnect in my understanding

@persona250

3 ай бұрын

Only relevant in a 3 phase circuit . The marked neutral terminal is late break early make .

@Shanky_TH9540

3 ай бұрын

@@persona250 that’s the thing…it’s not marked as neutral terminal. The connector block is the only connection marked for neutral

@persona250

3 ай бұрын

@@Shanky_TH9540 it isn’t a 3 phase circuit so no problem.

@Shanky_TH9540

3 ай бұрын

@@persona250 dude the far right terminal is aux only, even in single phase this is not designed to isolate the natural! Iv even looked in the manufacturers paperwork to check…unless this 4th pole specifically says it’s designed for a neutral then this is not right

@persona250

3 ай бұрын

@@Shanky_TH9540 mate it’s a 4 pole rotary isolator. The far right terminal is the late break early make terminal for the neutral in a 3 phase circuit…

1.5mm Cables not suitable for current carrying capacity of 20 amp breaker. Would melt before the breaker tripped if under excessive load. C2 Circuits can always be extended, especially in a place like that with engineers about.

Might want to blur their passwords on the whiteboard mate 👍

@corymac

3 ай бұрын

On it! Thanks Dan

Great craic!

@corymac

3 ай бұрын

Thanks!

Cory Mac and Chester the dream team as chester got a youtube channel

@corymac

3 ай бұрын

Wait until the next episode to find out more regarding the Chester saga 🤌🏼🤓

How long did the job take mate?

@corymac

3 ай бұрын

About 3 days

nice vid, could do with less fluff

The bathroom tho. we build airplane engines but cleaning and modernizing is not the budget 😂

@corymac

3 ай бұрын

🤣🤣🤣 Imagine it’s worse at Boeing

@MrKnuspel2

3 ай бұрын

@@corymacThat's probably true. :D

I'm very surprised they allowed you to video. At my previous company, all contractors signed an NDA and could not use any photographs or video for anything that was not project related. If the content was posted online the business would probably file a lawsuit.

@corymac

3 ай бұрын

Me too!

@corymac

3 ай бұрын

Me too!

Here in the US, you don't need to bond the water line in the bathroom.

@tebscat

3 ай бұрын

Here you bond it where it enters the building. Which may be the in the shithouse (didn't see a bath in there, so wouldn't call it a bathroom...).

@tubeDude48

3 ай бұрын

@@tebscat = True.

I think my friends work there

@corymac

3 ай бұрын

Cool! 😎

Chester Tester

Careful Cory, Chester is nearly funnier than you.

@corymac

3 ай бұрын

You wait until the next episode

23:48 "I don't want kids following me" - Cory Mac, TikTok star (2024).

@corymac

2 ай бұрын

🤣🤣🤣

Corolites 😂 but i guess we can settle with disciples. Cool video. Yes im binging today. Sorry for the many comments but i guess boost the holy algorithm gods. 🎉

Comedy duo

Always thought there was something dodgy about you, and now you have confirmed it. You're bilingual.

@corymac

3 ай бұрын

Katten drikker melk 🤷‍♂️

@markrainford1219

3 ай бұрын

@@corymac 😂

There’s hardly any actual EICR information information in this. I do like your videos but it just seems like a fan vlog with mainly you guys just loving the camera and showing off tools. You covered the apprentice level of EICR info. You even spoke about what results you should be expecting so vaguely and didn’t even cover the result of the circuit you just tested on the fire panel?

@corymac

3 ай бұрын

Sometimes we dive deep, sometimes we just have fun. It’s a reflection of the working life of a sparky!

@corymac

3 ай бұрын

Also, deeper dive videos are coming soon, but will likely be kept to another channel. This channel is edutainment. The other channel will be purely educational. Thanks for the feedback!

@corymac

3 ай бұрын

This channel is very much pitched at those who already have a base level of understanding, and just shows things applied jobs in unique environments, and different unusual jobs and situations. It’s not a ‘how to be an electrician’ channel. That’s more Efixx

Little bit of mishap there mate. 15:16 it's U not V, U=I*R

Is this where you lot are going to export the nuclear weapons to Australia for our subs that the Brits are building?

@corymac

3 ай бұрын

This isn’t for weapons, its more race cars

@TradieTrev

3 ай бұрын

@@corymac That's what she said; Us Aussies are pissed we didn't get the contract!

You missed a huge C1 - can't believe you didn't spot that 'Separated Earth'; was spelt wrong on their signage at 25:03 . 🤣🤣SHUT.IT.DOWN...!!