Shop fabricating custom steel doors to replace an old roll up door on a box truck that hauls used tires.
Жүктеу.....
Пікірлер: 64
@AXNJXN18 ай бұрын
Smart, smart, SMART!! The idea with chain link was on point!
@skipwaelty39748 ай бұрын
You are one of the most efficient guy's I've ever seen. Really appreciate your thought process. Great job.
@barryweiss575 ай бұрын
Nice work. I can smell the Rust-Oleum from here.
@NBSWELDING
5 ай бұрын
Right on!
@andrewrobinson28696 ай бұрын
The way your mind works blows me away, those Doors are perfect , it would of been nice to see some handmade hinges but we all know money is master, but even with that flat bar over the top of those hinges makes it look and act 100 % stronger. Again another perfect job, Well Done Sir,
@CamperVanDreamBuild-ct5pl4 ай бұрын
Rockstar needs to make a character based on this guy, he's got personality in spades.
@NBSWELDING
4 ай бұрын
I had to Google "Rockstar character" to find out what you meant...so I learned something here. And thanks because I appreciate the compliment. And thanks for watching and commenting 👍
@JRPalak8 ай бұрын
Those doors that you built are of much higher quality than any mass-produced roll-up doors that your customer originally wanted.
@steveferris12638 ай бұрын
Well done AGAIN CB! Nice to meet Ralph as well.
@ai43137 ай бұрын
Only a Genius makes a lot out of a little! Good job, as usual. About them DeWalt Pilot Points: I've used them a lot! Once they are done, use your Bench Grinder, grind them flat and then sharpen them like a regular drill bit. No need to throw them away...
@NBSWELDING
7 ай бұрын
Great tip!
@Blackopsmechanic3388 ай бұрын
Ralph must be taking after that guy working at NBS WELDING🤣🤣🤣. 🇺🇸🇺🇸🇺🇸
@ldtenenoff8 ай бұрын
once again ur design ideas and work and ability to make wat u see is truly a gift. Always enjoy ur content so again i say thank you for sharing ur journey with us. I too have inheitted a cat this 1 has 1 eye missing and is just too cool so we have adopted each other also.Congrates on ur new family addition there Big mouth Ralph, Our new 1 eyed cat is the most verbal animal ive ever owned but man is he KOOL
@jackdawg45798 ай бұрын
What i really like about your designs is that you too are an out of the box thinker, but you are more often than not on the "other side of the box" than I am. So just about every time you design something, it is totally different to what I was thinking I would do. I then get an "aha" moment when I realise what you are up to and how it will work!
@ExclusiveLM4 ай бұрын
A nice black decal saying Tire Haulers or something like that on the white walls of the side of the truck and you got a beautiful truck with those perfect rear black doors made by NBS. But.... only thing I did not like were those hinges. 12 dollar hinges are too flimsy for this type of a job. In time with the regular movement of the truck riding those hinges will give. But, the actual workmanship over all is 10 of 10 !!!
@raudiJesus8 ай бұрын
I really enjoy watching you work and hearing your thought process on what/why you do something, I probably never would have thought about adding a slider under the door so its more supported.
@Ivc4068 ай бұрын
Hi, good afternoon another quality video great pair of quality doors, loved the crisscross strengthening the hinges are adequate, good to see another cat in workshop regards and respec
@chrispugh758 ай бұрын
Beast mode!! Great job!! More videos please!!
@timothyhartley79862 ай бұрын
Awesome job on fabricating that door. I noticed you’re using a high gloss paint. The metal has to be almost perfect for high gloss and if it’s not, it’ll show a glare and imperfections in the metal when the light hits it. Try using a semi gloss paint or a satin black. I think they make an equipment black. Any ways love watching your channel.
@NBSWELDING
2 ай бұрын
Your correct...highest rust protection comes from gloss paint though
@countrymuch20178 ай бұрын
I did a set of hinges for a ramp door 20 years back and had to reinforce them as you did - appreciate your content - those doors look fine - anyone that says otherwise could kiss Mike Hunts cousin = Mike Keyster
@MsMoose19798 ай бұрын
Walk in my shoes they say. Great job for the budget allocated!
@curtishatfield96298 ай бұрын
You do great work and have quickly become my favorite channel. I know you're busy, but I wish you could post videos more often. Thank you for your time and effort!
@bigjohnson49838 ай бұрын
Those doors are awesome, I wouldn’t change a thing, Great job👍
@bombardier3qtrlbpsi8 ай бұрын
I say not an over kill. Rather have that 2 extra hinges than a come back. With the swinging doors he gains extra height which my be beneficial! Nice work 👍
@PaulFarrell048 ай бұрын
Thanks cb, great video
@transmitterguy4788 ай бұрын
CB, those doors look great! A true pro welder/designer guy you are. Sometime make a video on making hinges and latches and hasps. Mount them to a panel, mount it to the wall and you can show your customers what you can make.
@brianwalker1933
8 ай бұрын
That's an excellent idea.
@NBSWELDING
8 ай бұрын
I usually buy the latches, hinges, and hasps....the mass produced products are sold for way less money than what it costs to custom make those kinds of things No way I can compete with a company that makes latches at the rate of dozens or hundreds per day
@clintcowles75638 ай бұрын
Neat! Nice work, man. Thanks for sharing.
@gordjohnson703 ай бұрын
Well done, but the left door won't fit flat against the box, when it's open.
@williamthomas94638 ай бұрын
You’re absolutely right about those Dewalt pilot point bits! I have resharpened them and they work well except for the fact that you do lose the pilot point.
@joeheilm8 ай бұрын
Those doors turned out great! Excellent work. Cheers
@redzed408 ай бұрын
Nice job mate
@dougsweldingfabrication9538 ай бұрын
Great job !
@marcodilena50028 ай бұрын
Nice
@bombardier3qtrlbpsi8 ай бұрын
For Top latch make one or use that one. like the bottom but just a spring with a cable through a pipe welded to door. Just pull on cable to pull latch down. Just an idea. If you built that for me I would want a top latch. With all the effort put into the doors. 👍
@brianwalker1933
8 ай бұрын
Great idea. Not having a locking latch at the top isn't a good idea. The doors need to be secured at the top, to prevent movement in transit and to add to the doors strength, to resist bending/flexing when/if the tryes do press against the inside of the doors, especially if the truck is driving up some very steep hills. Other than that, the doors are well designed and made. He done an excellent job of this.
@deepwinter778 ай бұрын
I like it, and it looks cool too, As always the video is full of innovative solutions, I love the chain link idea.
@DamnDumbDuck8 ай бұрын
Now sir those are some sexy doors! Great video. I always learn something.
@bombardier3qtrlbpsi8 ай бұрын
I say new doors will last longer than the roll up door. I better shut up! I'm starting to sound like Ralph😂
@tdotw778 ай бұрын
That door stopper on bottom of left door that keeps it from going in too far doesn't interfere with the fold-up lift underneath, does it? The lift comes up level to the diamond plate deck so it might need a little notch cut out of it for that piece of angle iron coming down. Anyways I'm sure you got it figured out afterwards! Keep it up! 👍👌🛠️🗜️🔧📐📏✏️🔩⛓️🔨⚠️🚧💪👨🏻🏭😄
@NBSWELDING
8 ай бұрын
Anytime that the lift gate would be raised up to the deck height those doors would be open...so there would be no need to notch out for the stopper...when the doors are open everything is out of the way of the lift gate...there would be no reason to raise the lift gate when the doors were closed.
@bombardier3qtrlbpsi8 ай бұрын
Astro TS21Onyx drill bits work great as well.
@RG-gn1ln8 ай бұрын
Doors look good. Does the top panel overlap the bottom panel on the outside to keep water from going between panels when rain hits door and runs down?
@NBSWELDING
8 ай бұрын
No...it's an old truck for hauling used tires so we decided it's not worth trying to make it weatherproof
@messybench8 ай бұрын
I like that brake. Is there a story there? I worked a lot of shops and haven't seen that before.
@NBSWELDING
8 ай бұрын
No story just a box & pan brake I bought
@ssimderwelders8 ай бұрын
I really like what you share on KZread. And I can see from the comments that your followers really like your project. I was wondering if you would be interested in reviewing our machine. Please let me know if you are interested.
@NBSWELDING
8 ай бұрын
You can email nbswelding3@aol.com with more details. Thanks
@ericdolan21307 ай бұрын
Love the setup. Curious, did you do anything about weathetstripping the doors?
@NBSWELDING
7 ай бұрын
No weatherstripping...it's purpose is to haul used tires from a tire shop...no need for much of a seal...the doors just keep the tires from falling out
@ExclusiveLM4 ай бұрын
Who made a suggestion at 15:52 ??🤣🤣🤣🤣🤣🤣 That's what he said🤣🤣🤣🤣😂😂😅😅😅🤣
@NBSWELDING
4 ай бұрын
Yep that was a great suggestion from Mike Hunt and I've got a lot of use out of the saw stop setup 👍
@ExclusiveLM
4 ай бұрын
@@NBSWELDING That's not what I mean. Mike Hunt when said fast sounds like My C**t. 🤣🤣🤣🤣🤣😆😆
@gordjohnson703 ай бұрын
It's just for tires. Wouldn't mesh doors be enough ?
@NBSWELDING
3 ай бұрын
Would those be better?...mesh doesn't have much structure so you'd hafta frame up alot more
@alforliniteaching56706 ай бұрын
Barn doors are not loved by drivers,as you don't have he garage door convenience. No dice on the barn type. Can you fix or repair the roller door?
@NBSWELDING
6 ай бұрын
I built what the owner asked for...roller door was rotten beyond repair and I was told they couldn't find a roller door to fit...dunno...I didn't look into it...just built what they ask for
@alforliniteaching5670
6 ай бұрын
@@NBSWELDING I'm hip.
@dayslife8 ай бұрын
the doors came out nice... cutting and reusing the old door panels to fill the frame's center ???
@NBSWELDING
8 ай бұрын
The old door panels were rotten wood...got tossed in the dumpster
Пікірлер: 64
Smart, smart, SMART!! The idea with chain link was on point!
You are one of the most efficient guy's I've ever seen. Really appreciate your thought process. Great job.
Nice work. I can smell the Rust-Oleum from here.
@NBSWELDING
5 ай бұрын
Right on!
The way your mind works blows me away, those Doors are perfect , it would of been nice to see some handmade hinges but we all know money is master, but even with that flat bar over the top of those hinges makes it look and act 100 % stronger. Again another perfect job, Well Done Sir,
Rockstar needs to make a character based on this guy, he's got personality in spades.
@NBSWELDING
4 ай бұрын
I had to Google "Rockstar character" to find out what you meant...so I learned something here. And thanks because I appreciate the compliment. And thanks for watching and commenting 👍
Those doors that you built are of much higher quality than any mass-produced roll-up doors that your customer originally wanted.
Well done AGAIN CB! Nice to meet Ralph as well.
Only a Genius makes a lot out of a little! Good job, as usual. About them DeWalt Pilot Points: I've used them a lot! Once they are done, use your Bench Grinder, grind them flat and then sharpen them like a regular drill bit. No need to throw them away...
@NBSWELDING
7 ай бұрын
Great tip!
Ralph must be taking after that guy working at NBS WELDING🤣🤣🤣. 🇺🇸🇺🇸🇺🇸
once again ur design ideas and work and ability to make wat u see is truly a gift. Always enjoy ur content so again i say thank you for sharing ur journey with us. I too have inheitted a cat this 1 has 1 eye missing and is just too cool so we have adopted each other also.Congrates on ur new family addition there Big mouth Ralph, Our new 1 eyed cat is the most verbal animal ive ever owned but man is he KOOL
What i really like about your designs is that you too are an out of the box thinker, but you are more often than not on the "other side of the box" than I am. So just about every time you design something, it is totally different to what I was thinking I would do. I then get an "aha" moment when I realise what you are up to and how it will work!
A nice black decal saying Tire Haulers or something like that on the white walls of the side of the truck and you got a beautiful truck with those perfect rear black doors made by NBS. But.... only thing I did not like were those hinges. 12 dollar hinges are too flimsy for this type of a job. In time with the regular movement of the truck riding those hinges will give. But, the actual workmanship over all is 10 of 10 !!!
I really enjoy watching you work and hearing your thought process on what/why you do something, I probably never would have thought about adding a slider under the door so its more supported.
Hi, good afternoon another quality video great pair of quality doors, loved the crisscross strengthening the hinges are adequate, good to see another cat in workshop regards and respec
Beast mode!! Great job!! More videos please!!
Awesome job on fabricating that door. I noticed you’re using a high gloss paint. The metal has to be almost perfect for high gloss and if it’s not, it’ll show a glare and imperfections in the metal when the light hits it. Try using a semi gloss paint or a satin black. I think they make an equipment black. Any ways love watching your channel.
@NBSWELDING
2 ай бұрын
Your correct...highest rust protection comes from gloss paint though
I did a set of hinges for a ramp door 20 years back and had to reinforce them as you did - appreciate your content - those doors look fine - anyone that says otherwise could kiss Mike Hunts cousin = Mike Keyster
Walk in my shoes they say. Great job for the budget allocated!
You do great work and have quickly become my favorite channel. I know you're busy, but I wish you could post videos more often. Thank you for your time and effort!
Those doors are awesome, I wouldn’t change a thing, Great job👍
I say not an over kill. Rather have that 2 extra hinges than a come back. With the swinging doors he gains extra height which my be beneficial! Nice work 👍
Thanks cb, great video
CB, those doors look great! A true pro welder/designer guy you are. Sometime make a video on making hinges and latches and hasps. Mount them to a panel, mount it to the wall and you can show your customers what you can make.
@brianwalker1933
8 ай бұрын
That's an excellent idea.
@NBSWELDING
8 ай бұрын
I usually buy the latches, hinges, and hasps....the mass produced products are sold for way less money than what it costs to custom make those kinds of things No way I can compete with a company that makes latches at the rate of dozens or hundreds per day
Neat! Nice work, man. Thanks for sharing.
Well done, but the left door won't fit flat against the box, when it's open.
You’re absolutely right about those Dewalt pilot point bits! I have resharpened them and they work well except for the fact that you do lose the pilot point.
Those doors turned out great! Excellent work. Cheers
Nice job mate
Great job !
Nice
For Top latch make one or use that one. like the bottom but just a spring with a cable through a pipe welded to door. Just pull on cable to pull latch down. Just an idea. If you built that for me I would want a top latch. With all the effort put into the doors. 👍
@brianwalker1933
8 ай бұрын
Great idea. Not having a locking latch at the top isn't a good idea. The doors need to be secured at the top, to prevent movement in transit and to add to the doors strength, to resist bending/flexing when/if the tryes do press against the inside of the doors, especially if the truck is driving up some very steep hills. Other than that, the doors are well designed and made. He done an excellent job of this.
I like it, and it looks cool too, As always the video is full of innovative solutions, I love the chain link idea.
Now sir those are some sexy doors! Great video. I always learn something.
I say new doors will last longer than the roll up door. I better shut up! I'm starting to sound like Ralph😂
That door stopper on bottom of left door that keeps it from going in too far doesn't interfere with the fold-up lift underneath, does it? The lift comes up level to the diamond plate deck so it might need a little notch cut out of it for that piece of angle iron coming down. Anyways I'm sure you got it figured out afterwards! Keep it up! 👍👌🛠️🗜️🔧📐📏✏️🔩⛓️🔨⚠️🚧💪👨🏻🏭😄
@NBSWELDING
8 ай бұрын
Anytime that the lift gate would be raised up to the deck height those doors would be open...so there would be no need to notch out for the stopper...when the doors are open everything is out of the way of the lift gate...there would be no reason to raise the lift gate when the doors were closed.
Astro TS21Onyx drill bits work great as well.
Doors look good. Does the top panel overlap the bottom panel on the outside to keep water from going between panels when rain hits door and runs down?
@NBSWELDING
8 ай бұрын
No...it's an old truck for hauling used tires so we decided it's not worth trying to make it weatherproof
I like that brake. Is there a story there? I worked a lot of shops and haven't seen that before.
@NBSWELDING
8 ай бұрын
No story just a box & pan brake I bought
I really like what you share on KZread. And I can see from the comments that your followers really like your project. I was wondering if you would be interested in reviewing our machine. Please let me know if you are interested.
@NBSWELDING
8 ай бұрын
You can email nbswelding3@aol.com with more details. Thanks
Love the setup. Curious, did you do anything about weathetstripping the doors?
@NBSWELDING
7 ай бұрын
No weatherstripping...it's purpose is to haul used tires from a tire shop...no need for much of a seal...the doors just keep the tires from falling out
Who made a suggestion at 15:52 ??🤣🤣🤣🤣🤣🤣 That's what he said🤣🤣🤣🤣😂😂😅😅😅🤣
@NBSWELDING
4 ай бұрын
Yep that was a great suggestion from Mike Hunt and I've got a lot of use out of the saw stop setup 👍
@ExclusiveLM
4 ай бұрын
@@NBSWELDING That's not what I mean. Mike Hunt when said fast sounds like My C**t. 🤣🤣🤣🤣🤣😆😆
It's just for tires. Wouldn't mesh doors be enough ?
@NBSWELDING
3 ай бұрын
Would those be better?...mesh doesn't have much structure so you'd hafta frame up alot more
Barn doors are not loved by drivers,as you don't have he garage door convenience. No dice on the barn type. Can you fix or repair the roller door?
@NBSWELDING
6 ай бұрын
I built what the owner asked for...roller door was rotten beyond repair and I was told they couldn't find a roller door to fit...dunno...I didn't look into it...just built what they ask for
@alforliniteaching5670
6 ай бұрын
@@NBSWELDING I'm hip.
the doors came out nice... cutting and reusing the old door panels to fill the frame's center ???
@NBSWELDING
8 ай бұрын
The old door panels were rotten wood...got tossed in the dumpster
Nice