Fabric Floor Removal and Repair on a Zodiac Futura with Speed Tubes
Тәжірибелік нұсқаулар және стиль
On this episode of INFLATED!!!
On this episode, I have a Zodiac Futura come I where the floor has let go and needs to be reglued in. Follow along as I get into this crazy repair.
Hit that LIKE button if you enjoyed...
Subscribe if your new to the channel!!!
Happy Boating...
For partnerships or sponsorships, please contact us at gashopperinc@hotmail.com
For merchandise, boat parts, supplies or even
inflatable boats, visit our website at www.gashopperinc.com o www.theinflatableboatshop.com
Follow us:
Facebook: @gashopper
Instagram: @gashopperinc
We're now on Patreon. Your donations and support will help us provide you with more indepth videos
Patreon subscriptions/donations: at / gashopper
For other donations and support can be sent to www.paypal.com/paypalme/gasho...
Пікірлер: 39
You are awesome You make it look so easy Great job Well explained Greatly respectfully Thank you for information
@gashopperinc
Жыл бұрын
Thanks and welcome
I am standing next to my 2006 Mark IIc Futura. Port side floor is detached. Transom was replaced five years ago. The floor connection there is solid as is the bow section. I am hoping that one side is my neglect. I was putting it back together after all these years. Left it overnight. Had a migraine the next day. It was warm and sunny. That edge got direct sun in that tube may have over-pressured. I noticed it after it was together in on the trailer. But not right after assembly.
zodiac boats just fall apart had three but will never own another one
really informative and you make an enjoyable video, cheers, one question though what glue do you use or recommend ? I have to glue the complete floor to the pontoons on a never used zodiac fh 12.6
@gashopperinc
20 күн бұрын
Thank you. I try to be as informative as possible. I recommend using a 2 part glue. Zodiac or Stabond are the preferred choices here, we also work with Weaver when.the others on backorder.
do you think it would be possible to repack a transom with a carbon fiber & expoy to reenforce it?
@gashopperinc
2 жыл бұрын
not sure, anything is possible, until it doesn't work. LOL
Good morning. First, I really enjoy your videos. I have a question. I have a Futura Mark III with the high pressure inflatable floor. When I try to inflate the floor the front bulges up and seems to take all the air and not filling the rest of the floor. I'm not sure what is going on. I'm hoping you can help me diagnose the issue and maybe suggest a solution. Thanks.
@gashopperinc
5 ай бұрын
Send us pictures of the floor to our email and we'll be able to see what's happening and guide you from there.
Man do you have patience.. appreciate the cool video. Always wanted one of these futuras with the speed tubes.. good to know they have a potential failure point
@gashopperinc
2 жыл бұрын
Pretty common with older boats. Have number 3 in the shop now getting the exact same repair.
@rudytamayo2646
3 ай бұрын
@@gashopperincwhat's a ballpark price point for a repair like this..? Just to have an idea..thanks 🙋♂️😎
Should have explained about hinge(gusset) tape. Sometimes(often) parts of it have to be reglued to floor before attaching floor to boat. Also i's good to put 2 sided tape in between hinge tape(fabric) to help stay in place while reattaching.
@gashopperinc
Жыл бұрын
I understand what your saying. But you have only so much time where you loose the audience's attention, lol. I try to be as thorough as possible, and let the viewers put the missing pieces together in the end. If they have questions, they leave them in the comments, and me or my viewers always help as possible. The two side tape is a excellent good idea. I've always used a dab of glue on small sections of the inner strips/gussets, to hold it in place while aligning and when assembly comes into play I use the burnishing tool to release the 2 sticking sections after everything has been installed and start lining up the inner strips/gussets. Saves on shop supply cost, but does require a little glue cleaning afterwards.
Hello great video. What kind of adhesive are you using to glue the floor back on? Thank you 🙏
@gashopperinc
5 ай бұрын
Zodiac Z7096 or Stabond UK-148 for PVC fabric or Zodiac Z7098 for Hypalon fabric.
Great job, thanks for the explaining. Can you tell me is my old 2000 Zodiac mark 1 pvc or hypalon? Previous owner told me its hypalon but what I heard it's welded pvc tubes with glued transom and bottom.
@gashopperinc
Жыл бұрын
Depends if it's a Hurricane/Milpro model or Classic or Futura Zodiac model. If Classic or Futura brand, then it's PVC. If Hurricane or Milpro, then most like Hypalon/Neoprene.
@gashopperinc
Жыл бұрын
Another way to tell is how the seams over lap each other. If it's belted seams, then it's welded PVC, if overlapped, then Hypalon.
@gashopperinc
Жыл бұрын
If it's pre- 1990s and seams are overlapped, then it could be glued PVC seams.
@laszlomolnar4199
Жыл бұрын
@@gashopperinc Thank you!
@danielweeks3723
Жыл бұрын
just a note hyp can't be welded
great job!! my inflatable keel tube is damaged and not repairable where can i find a new one for my mark 2?
@gashopperinc
Жыл бұрын
They have to be ordered from a Zodiac dealer. You will need your boats, Model number and HIN number. I can order one for you also. Just contact us and we'll call Zodiac to find out availability.
@gashopperinc
Жыл бұрын
Please email us the information on your boat to gashopperinc@hotmail.com, we'll be able to go from there. Info you posted earlier was removed as it contains information from your boat scammers or fraudsters can use.
Have you ever done any repairs on the speed tubes alone?
@gashopperinc
2 жыл бұрын
yes, many times!!!
Could you run a futura without the speed tubes?if the mounts were removed?
@gashopperinc
2 ай бұрын
You certainly can.
Is nrs a trustworthy site to buy glue from?
@gashopperinc
3 ай бұрын
Why don't you just purchase it from us? I'm sure we have what your looking for.
@markkurzweg7777
3 ай бұрын
@@gashopperincI wasn’t aware you had a website, I am also not sure if I can purchase it since I don’t use Canadian currency.😂
@gashopperinc
3 ай бұрын
@markkurzweg7777 We've sold a list of items around the world. PayPal does its currency exchange for the currency you want to use? We can also process other payment methods.
How do you rate the zodiac futura
@gashopperinc
Жыл бұрын
Not sure what your asking, Rate on performance or overall boat assembly?
@JohnSmith-fd4wt
Жыл бұрын
@@gashopperinc Quality of build many thanks
@gashopperinc
Жыл бұрын
They are well put together boats. Fabric is thick and durable and are overall high quality boats. Repairs can be a pain sometimes if there damage in the speed tube areas. Only thing one has to watch out for is the age. On older Zodiac inflatable boats, glue tends to fail after 10-15 years if not cared for.
@johnelko5888
Жыл бұрын
I’ve only had mine on the water a short time. I bought it 10 years ago. The 20 horse Nissan just hit its 10 hour and break in. The last time it was ran five years ago. I have not had WOT yet, but I am really looking forward to it.