Great video. Breaking the bead on the tyre is my biggest challenge. I would never have thought of using the side stand to do this so thanks for the tip!

I think you can remove the axle first, allowing you to remove the chain adjuster blocks without loosening the chain adjuster settings. There should be enough play in the chain to make this pretty easy. Assuming that you adjustment is where it should be before you start, this will allow you to put the wheel back on without fiddling with chain adjustment. This saves a substantial amount of hassle and requires fewer tools out in the wild.

This is the most useful video I've seen on the subject. Maybe the only unnecessary thing is to loosen the chain adjusters, if you don't have to deal with adjusting the chain, as others also pointed out. Great vid!

Great tutorial Greg, Simple solution to what could otherwise be a big problem on the trail! Thanks

Great tutorial. It helped me change a tube on the side of the road today. The only thing I would add is that if your chain tension is within tolerance not to loosen the adjusters.

Thanks alot, great video....especially using the kickstand, one time i used my front end loader to break the bead on a tire that i took off of it....necessity is the mother of invention.

Thanks for putting this up. Good information and clearly laid out.

Thanks for the video, Greg! Just got my F800GS and was wondering how to break that seal on the side of the road. Very handy knowledge, thanks for sharing! A+++

I hope I can do it when I need it on the trails. Excellent.

"One kick and it's in" - was that a lucky kick? :-) I had to beat the hell out of that wheel, with both feet and knuckles! Nice video, thanks for posting!

Merci Greg. J'aime le savon liquide au lieu du WD-40. Cool ton video C relax et visuel. Well done

Yes, that was addressed. It was to show how and what a proper adjustment looks like thanks!

great tutorial Greg!

Great video but one thing you've got to be careful of is when you sprayed the lube the first time - It must have gone through the wheel onto the rotors/discs. Be sure to clean it off or cover them in the first place.

Hy it's a nice Videomanual and a great example. one part we don't do in Germany, WD40 is based on oil and silicon and be on the tire for a long time. (betwen tire and rim) Better use a luiqid soap at home or at the camping place.

Side stand.... Brilliant!

Muito bom vídeo!

Thanks Greg!!!!

When the tyre is off, just take the opportunity to tap the sprockets and make sure that they are firm and tight! If you want to replace one, now is the time to do it...

thanks Greg

Thanks for this video, very helpful...

Thanks, great tutorial

Cheers Greg, great vid for a mechanical goof like me. If you have the time any other top tips for the F800 would be appreciated. pauljames

thanx for video.

Great video - thanks. Do the tire irons scratch or dent the rims at all? Is there a recommended way to protect?

@greghil

4 жыл бұрын

Not really, but something I've never been concerned of. The motion pro bead breaker irons work great

Oh great , I see why my ABS sensor is beat to hell. Great Video ! are you on the f800riders forum?

Très pratique, merci.

Thanks. It was so cool~!

@Septimanien aucun problème

Great Vid, what kind of tire do you recommend for a fellow F 800 GS rider that likes to go off road, but still wants control in tight turns on the street? I went with the Avon before and loved it but it was too soft, and resulted in it quickly wearing out, due to a lot of street riding. anyway, what kind of tire is that, the Metzeler Karoo 3 Tire ?

@greghil

9 жыл бұрын

Joseph Cage I ride TKC 80's on all my bikes. Consistent all around.

@andrewc7451

7 жыл бұрын

Greg Hilchey even on the city?

@vascopixel

6 жыл бұрын

what about karoo 3?

@pump1982 It's all about the lube ;-)

no lubricant please it is so bad

Mono left channel only :(

Quero ver fazê isso com Mitas

@greghil

7 жыл бұрын

The technique is the same regardless of the tire. But here is my friend and fellow instructor changing a Mitas in while on the road. facebook.com/bret.tkacs/videos/vb.1174564497/10209590767984084/?type=2&theater