I’m a 55 yo old woman who has never attempted to repair anything!! Thanks so much for your help!! I replaced the water pump without any problems. Cost me 65.00 for the pump. Saved me sooo much money!!

Very in-depth video some say it was to long but I watched it all. You never know what you may miss. Also I clean my filter out from time to time and I’m able to get rid of the F21 code. After the clean I also check the propeller to make sure it’s still spinning with no issues. So far so good. BTW, I have the same exact make, model and color as you Lol. So it’s good to know should I need to buy a new water pump I’ll know exactly what to do. We’ve had the washer and dryer for 12 years and the only thing I’ve replaced was the washer door hinge. Thanks for making this video, it’s ver much appreciated!

@jdmediahub

Жыл бұрын

Noted

The details and good video angles were very helpful. Saved me time and money, thanks! I was easily able to skip to the parts I needed for my particular problem.

Very thorough! My impeller, it too has developed a hole in it. You said you heard that you should get about 3 years use from that pump. Where did you hear that? It's been 3 years now. How has the pump been working?

@jdmediahub

7 ай бұрын

Yeah most of the Amazon knockoffs have anywhere from 2-3 as a lifespan. Mine worked until a bearing took out my washing machine, about 3 years and was doing great. I’ve used the knockoff heating elements for my dryer and they burn out every 18mths - 2 years but since I’m paying $28-$35 I’m not complaining

Fantastic video, thank you! I'm wondering what tells the pump to turn on and off and sense water to be pumped. Obviously the computer board tells the pump to kick on, but I don't know how it knows when the water is drained. I don't see any float or other means of sensing water. I wonder if the computer is sensing a change in resistance to the pump motor. I'll be opening up my washer later today to begin. thanks again!

Thank you for the guidance Got my washer fixed

@jdmediahub

Жыл бұрын

You are welcome

“Pliers”= Channel locks. Lol. And I’m gonna put a large hose clam on ours... that’ll make that battle with the black hose A LOT EASIER! It definitely is a battle for sure, ESPECIALLY WITH THE PUMP IN THE WAY, like I had. Good info though. Many thanks. I also found that you must make sure that the ball doesn’t get pinched up in the black hose with the clamp. That happened to me when I put it back on.. sucker backed up and shot water everywhere, blew the dang clamp and black hose right off and water went all over the place.

@jdmediahub

Жыл бұрын

Agreed

Thanks. Video helped

@jdmediahub

7 ай бұрын

Glad I could help

thank for replied my question, the window appeared FP code that mean something relate to the water pump how to fix that problem please help me thanks. When I bypass and used the drain and spin the motor work well after that I continue next funtion rinse and spin they work very well I think the motor has no problem

@jdmediahub

2 жыл бұрын

At this point ensure there is no obstruction within the drain lines and then replace the pump. You specific pump can be found on Amazon with the units Model number. I have two specific videos on how to replace the pump. It shouldn’t cost you more than $30-$40 USD on a new pump.

Really 48 minutes of video? You need to cut your videos no more than 25 and straight to the point.

@jdmediahub

Жыл бұрын

Noted

Hi Joshua I had a whirpool 10kgs series 6 it wash to the drain period and then stop with the code FP I used other funtion to drain water and spin please help me to fix that

@jdmediahub

2 жыл бұрын

Ii could be that the Motor control Unit is bad, and or the door lock solenoid is damaged. The door lock solenoid is an easy fix. The motor control unit is costly but still fixable.

@haihonguyen4914

2 жыл бұрын

Thanks for your advise I will try Regards

Thanks homie

Would've been nice if you showed how to take out the pump.....

Did this end up fixing your issue or did you have other issues after doing this? Thanks.

@jdmediahub

4 жыл бұрын

Yes it did. The main point I was trying to get across was the black tubing underneath was so difficult to get back on.

@marcos_bm13

4 жыл бұрын

I’m having the F-21 problem right now. How do you tell if the pump motor is bad? I’ve stuck my finger in the hole you mentioned after taking out the catch basin and the part wiggles. Is that normal? How does it supposed to feel when it’s bad?

@Cincy_Kid

4 жыл бұрын

@@marcos_bm13 if it's not draining water it's most likely the motor

@marcos_bm13

4 жыл бұрын

DEPROGRAMMED thanks. I just ordered a new motor on Amazon like you recommended on your video. Hope it solves my problem.

@Cincy_Kid

4 жыл бұрын

@@marcos_bm13 it's not my video but I just had the same situation and replacing the motor fixed my problem. I did buy my part from an authorized dealer that sells OEM parts because I've heard horror stories about cheap Amazon parts. Good luck!

Pictures didn't help at all. Video of taking the pump out would have been great!

@jdmediahub

Жыл бұрын

Noted

You did not show the most important parts !! You did not show how to remove the pump and you did not show how to install a new pump. Give me a break !! We don't need a 48 minute video on how to disconnect and reconnect 2 hoses and an electrical connection.

@rvalens2

Жыл бұрын

I agree with you Imre. I think he could have kept the video to 10 minutes and still told us everything we needed to know.

I hand washed an item each time he said "actually" and now I don’t need a washing machine.

@tylerhiller4886

2 жыл бұрын

U should actually go wash urself u prolly smell bad

Part # ?

I hate my washing machine

Me gustaria que fuera en español gracias

Honestly this video is 45 minutes too long. You say the same exact thing probably 9 times. Just film what you did to fix the problem, man... Hahah this is hilarious. How to you get the magnet part out?

@jdmediahub

4 жыл бұрын

Kyle Cott yeah it’s crazy long. Lol. I really put this up as a way to remind myself what I did. The magnet housing turned off of the pump housing by turning clockwise. Then the impeller demagnetized from all of the sand and debris in the pump. It was shot.

@tylerhiller2573

3 жыл бұрын

Shut up he can do what he wants

@tylerhiller2573

3 жыл бұрын

He is making the video for u Kyle, so shut up and watch it or it’s not gonna get fixed