Nice rig! Great to see fellow F-150 drivers demo’ing their overland set ups. Looking into those voodoo cross bars now!

@coleeades

11 ай бұрын

Thanks for watching!

Nice build. I have that same tire inflator and had no idea it fit behind the rear seat. Will relocate mine now. Thanks for the video.

@coleeades

5 ай бұрын

Fits perfect if you keep the battery out. Thanks for watching 👍

Dude, this truck is awesome. I have essentially the same build on a 2019 Ranger XLT 4x4, ADD bumper, lift and tires, RCI rack and RTT, etc. I'm about to go up to an F150, either reg or ext cab, and do a permanent pop-up overland bed camper build. Great inspiration!

@coleeades

3 ай бұрын

Thanks for watching! They really are an awesome platform

Thanks for gear grabber rec!!! Good vid

@coleeades

9 күн бұрын

It’s a life saver. 😃 thanks for watching

Nice Build, Cool personal touches.

@coleeades

4 күн бұрын

Thanks for watching!

Nice setup 👍

@coleeades

11 ай бұрын

Thank you!

Nice truck.

Goals! After selling my 4runner i decided on keeping a few things i had on it and a few things i never got around to installing like the midland, 8ft awning with room kit, arb twin w/wifey air. Im going with 18”s and 33”s with a front spacer lift. No major offroading just fire roads and koa. I have stomack problems so on the single flip up section where your car seat is i have a cassette toilet, its a life saver.

@coleeades

10 ай бұрын

Sounds awesome!

Moore vids like this👍💪 Greetings from Finland

@coleeades

10 ай бұрын

Sounds good! Thank you!

Cool truck

@coleeades

8 ай бұрын

Thank you! Appreciate you watching the video

Nice truck bro.

@coleeades

11 ай бұрын

Thanks 👍

I love your set up. I have a 2002 F150 I’m thinking about figuring out a build for that.

@coleeades

2 ай бұрын

Appreciate you watching the video! Have fun out there.

Nice rig and thoughtfully done. The magnet idea is cool. Have you had any issues with magnetism interfering with the radio functionality or power? I just ordered a fire extinguisher for my truck and that bed molley is a good idea!

@coleeades

9 ай бұрын

I didn’t even think about that when installing. I haven’t noticed any issues with it since it’s magnetic to the radio mount and not the radio itself. But I’ll keep an eye on it to see if I notice anything

Looking for a truck exactly like this. But man can’t even afford a 2015 with these prices of trucks now a days. So sick dude!

@coleeades

11 ай бұрын

Ya it’s tough right now!

@user-ky6ql4tl6v

9 ай бұрын

Get a 13’. I love mine it’s a stx. Nothing special 4x4 with the coyote.

Would love to hear your future plans with your build and what was worth saving money on vs splurging on.

@coleeades

6 ай бұрын

As far as future plans I would like to upgrade to a truck camper. Probably a Dwell Shell from a company called "AntiShanty" (Similar to a Go Fast Camper). I'm a big fan of budget gear but things I'm glad I spent the money on are (suspension, wheels, tires, RTT, and a low mileage F150)

Thanks for sharing. my plan on doing the same video hasn't been done yet. it's been a year . lol. Just a concern though, I don't think it's good to let your baby do a screen time while driving. even us adults can hurt our eyes.

Ecoboost or 5.0? Awesome build man! Looking to upgrade sometime soon from my ‘06 Tacoma.

@coleeades

11 ай бұрын

Thank you! 3.5L Ecoboost

I just traded in my 17 Tacoma for a f150. I do miss it but it is night and day this thing rides like a Cadillac and is so much bigger

@coleeades

9 ай бұрын

That’s awesome!

Hello, Great Video. In process of building my 2021 f150 for overland setup. can you please let me know if you are able to open/ roll up the tonneau cover with cross bars installed? TIA

@coleeades

5 ай бұрын

With the short bars like I have you are not able to. But I have found that there is no situation needed where rolling the cover would be of any benefit with the bars on.

Looks great, where did you mount the radio antenna?

@coleeades

4 ай бұрын

I ended up buying the upgraded ghost antenna and mounting it on the hood using the hood mount.

Did you have to take out the rear crash bars also to fit the 35s. Also what offsets are your wheels. Stance is great

@coleeades

3 ай бұрын

Yes I did cut them out. It was super easy. I don’t have any offset.

Are you running stock leaf springs in the back with this setup or did you have to upgrade for the extra tent/gear weight?

@coleeades

10 ай бұрын

Because I have adjustable reservoir suspension I have not had to change the leaf springs 👍

Are the magnets holding your CB and hand gun strong enough over bumps and rattles? how would you rate?

@coleeades

11 ай бұрын

Definitely 10/10. I wondered that myself before using them but they are really strong. I can rally my truck very hard and everything stays in place perfect.

for your back seat cubby holes what were the dimension? My truck is in the shop and i can't measure it and want to get started on the project. Seems like your seat is in similar position as mine.

@coleeades

11 ай бұрын

I’ll try and do a video soon showing more in depth how I built them! Here’s the dimensions. 20”L x 14”W x 13.25”H 3/4” plywood x1 20x14” x2 20x12.5” x1 12.5x12.5”

Nice truck, I literally have the same truck, I have 2018 F150 5.0, Leer Topper and Deked System. I also have the Vertex 3” RC suspension and 35s. Also came from a Tacoma lol. My question what is your front adjustment at? Meaning how many rings do you have visible ? I am thinking of lowering mine for better ride quality, currently I have about 12 of the rings\grooves visible. I typically run it at 3 or 4 setting for street. Need to dial in for better ride. Thanks

@coleeades

8 ай бұрын

I haven’t played around with the ring adjustment yet. Let me know what you find out when adjusting those. As far as the reservoirs go I have them set on 4 most of the time

@damonphalin6023

8 ай бұрын

Would you mind measuring the area you have? Meaning how much of the silver collar is showing. I have just under an inch, about 7/8 th.

@coleeades

8 ай бұрын

@@damonphalin6023 you bet. I’m at SEMA in Vegas right now but will when I get back!

@coleeades

8 ай бұрын

Exactly 3/4" showing. Let me know what you find out when experimenting with it.

@damonphalin6023

8 ай бұрын

Interesting. Thanks, I will let you know, I’m gonna lower mine a bit.

Hey Cole, what motor is in your truck, I love the setup!

@coleeades

4 ай бұрын

Appreciate it man! It’s the 3.5l V6 EcoBoost

Hey man just got a similar truck and looking at suspension options. Did you just use the vertex coil overs or did you also pair that with a lift kit

@coleeades

9 ай бұрын

It’s the 3.5” lift with full Vertex on front and rear. Hope that helps!

@tempusfugit3635

5 ай бұрын

Does it drop the diff for the CV axle angle or are you just rockin it? Any issues?

@blane4thgen

4 ай бұрын

@@tempusfugit3635also wondering this

Do you prefer the 5.0 or 3.5? Looking into getting a F-150 soon

@coleeades

7 ай бұрын

I prefer the 3.5 but it probably just comes down to personal opinion.

Will that barricade bumper accept winch, winch plate behind it with fair lead etc?

@joshuabright547

11 ай бұрын

And I guess no rubbing at full flex in the front or rear? What offset are the wheels

@coleeades

11 ай бұрын

I have not seen anyone run a winch on this exact style yet but I do think there’s a chance it could be done. No running since I have taken the time to trim my wheel wells a lot

Will those magnets interfere with the radio?

@coleeades

11 ай бұрын

Good question… I haven’t had any issues yet but did not think about that!

Do you have to trim anything to run those tires?

@coleeades

11 ай бұрын

No trimming in the rear but yes quite a fair amount of trimming in the front. But nothing crazy. Your not cutting entire wheel wells or anything

Do you have any issues with rubbing running 35s?

@coleeades

8 ай бұрын

I did in the past but not anymore. Just takes some work to cut out various things in the front wheel wells. Now I never rub

how did you mount the radio to the side like that what size screw?

@coleeades

11 ай бұрын

They are just tiny screws that came with the magnet. The magnets also come with 3M backing so you might now need the screws. I just wanted it to be extra secure. I'll attach the link. www.amazon.com/Magnetic-Holster-Handgun-Shotgun-Revolvers/dp/B07XCK2PSG/ref=sr_1_5_pp?crid=1A4SD7TNQL3PV&keywords=gun+magnet&qid=1691002668&sprefix=gun+ma%2Caps%2C280&sr=8-5

@Sanjuk0522

11 ай бұрын

@@coleeades sweet thank you, I was afraid plastic might crack when I screw it in.

Which engine do you have in that bad boy

@coleeades

2 ай бұрын

3.5l Ecoboost

Hopefully this is me next year. Waiting on truck prices to be reasonable again. Have you considered something like the decked drawer system? Or for you use case are the boxes and Milwaukee pack out just fine.

@coleeades

11 ай бұрын

With a tonneau cover a decked system would take up about 3/4 of the truck bed leaving you a small area for gear above. I have too much gear that would then no fit on top or in the drawers. Someday I want to do a truck cap. (Probably the RSI smart cap) then I will do a decked system.

Anyone else here from peck brothers channel? 😂 Shoot that makes me want a pickup so much space

@coleeades

7 ай бұрын

They are great guys! They were a huge help! Thanks for watching!

Can you link the molle panel you used for the bed?

@coleeades

4 ай бұрын

a.co/d/c8dp1EG

@coleeades

4 ай бұрын

kzread.info/dash/bejne/pqmptayDedOegco.htmlsi=1c7NRx0d5Yj2en6j

@coleeades

4 ай бұрын

Just added the Amazon link for the Molle panel and a link to a KZread video I did reviewing just the Molle Panel. Hope that helps 👍

How does the suspension feel?

@coleeades

8 ай бұрын

I’m impressed with it. It’s not quite as plush at slow speeds like some of the more expensive name brands but at higher speeds it really performs well

What’s the offset on your wheels ?

@coleeades

Ай бұрын

No offset 👍

KV-Doo Doo?

@coleeades

8 ай бұрын

KB Voodoo Fabrications

That sticker under your F150 badge is desecration of the flag based on US Flag Code, Section 8(i)

@Tsxtasy1

6 күн бұрын

Also, your vehicle is not a holster.

Too much mod on tiny truck like that, is too crowded and pretty heavy I assume, that will drain out your fuel thank

@mariosgbodys

9 ай бұрын

People have similar setups on tacomas.. perfectly fine for s f150

@coleeades

9 ай бұрын

Thanks for the backup 💪 haha 😂

@coleeades

9 ай бұрын

Luckily the F150 has a massive payload capacity. One of the best in class. They are a full size truck after all. It’s why I chose it for my build! Had a Tacoma before and you do have to be cautious there with payload and GVWR.

@jmcwhorter100

8 ай бұрын

Awesome video do you recommend the F150 or Taco I’m shopping hard for both thanks man.

@coleeades

8 ай бұрын

@@jmcwhorter100 there’s definitely not a clear winner. It’s up to the individual and either way you will have pros and cons. My favorite things about an F150 are bigger engine, Way more cab room and storage space, can fit 35” tires pretty easy. It’s much more comfortable to travel in and can still be an off-road beast. F150 will do 95+ mph without even thinking where a Tacoma struggles above 80. So it’s just my opinion but I like having a bigger truck now that I have one. A Tacoma will fit on smaller trails technically without scratching.