"Clients don't really know craftsmanship but they know cleanliness" most accurate statement about construction I've ever heard 😂

@mikekrzesowiak7944

4 жыл бұрын

I know right?! That's dead on

@borys444

4 жыл бұрын

Facts!

More videos like this, please. I like the step by step install videos.

@eloymarquez4783

3 жыл бұрын

Yes please! I might not do it myself, but it shows what to look for from a builder

@markmoreno7295

4 ай бұрын

Yeah and ditto. I wanted to see what is used at the lower edge of the Comfort Board as a bug screen/ splash guard.

The last option with the outie window makes for a nice big window sill on the inside that many homeowners love.

@lisabaginski9155

3 жыл бұрын

Yes, very European.

@hailexiao2770

3 жыл бұрын

@@lisabaginski9155 Really? Outie windows have always been a North American detail in my experience. In places where mass masonry is more common vs framing (i.e. most of Europe), innie windows are much more prevalent.

@danielspringer4010

3 жыл бұрын

@@hailexiao2770 Not in Denmark or Northern climates. The external insulation is a must. But even old European structures have super thick walls (just no insulation)

@Jeremyschannel1

Ай бұрын

I want to use insofast on my house like you had featured at one point. It's an old house with no house wrap currently. Insofast advertises that you don't have to use wrap since the insulation panels basically are the water barrier,don't they?. If I wanted to do the "outtie" style window like you described in your last example because I want the big sills on the interior (we plan to replace all the windows when we replace the siding). Would you recommend that I seal the 2x10 to the sheathing or to the surface of the insofast panels?

Professor Risinger. A man on a mission.

This is what I have been waiting for. The small details.

Fully expected this being the next Abandoned Mansion episode, with Matt Carriker. As he uploaded the Zip system arriving yesterday, along with you.

Another key point for the airspace behind the siding is heat ventilation. You mentioned bug screening on top and bottom, but that also allows excess heat buildup to ventilate out, especially when using a darker siding which absorbs heat. Heat being the secondary most common cause of siding failure behind water. Great video. Like the mock-ups for customers to see how things are being engineered and not just built.

I’ve been watching for a long time, and always wonder how you put that thick rock wool outside and this video was all I ever needed. Thank you once again for teaching me another great build practice.

Perfect. More videos like this Matt! Well done!

Hey Matt, I'm working my way through my first full remodel on my personal home. I just wanted to say thank you for making these videos. I've learned so much and i plan on applying a lot of your methods on my build.

Great video Matt, its much appreciated helping the building industry

THANK YOU! Exactly the video I needed. For at least a year or two, I've had a hard time picturing how a window assembly works with exterior insulation, and this cleared it right up.

Time for a large hard back book: "Builting Tips from The Build Show". Craftsmanship indeed!

That's one of the most extensive explanation, demo and options that I've seen you done since I've been a subscriber and it was awesome, thanks so very much for sharing.

GREAT VIDEO Matt. I have been looking at ways to handle windows when adding exterior insulation. Thanks for all the information you provide on new materials as well as best practice.

What a resource Matt! I know the extra effort this takes; and it's exactly what I needed clarified. thank you

I prefer using the last assembly however I think it can be improved on a little bit to reduce thermal bridging around the window. The last house we did we used 4.5" of rigid foam (Silverboard) on the exterior brought flush to the opening of the window. 3/4" plywood to extend the sill from the inside of the 2x6 wall to the outside of the strapping (total ~11.25", 5.5" framing, 1/2" ply, 4.5" foam, 3/4" strapping) make sure the strapping is below the 3/4" plywood sill extension. We used 7.25" GRK RSS fasteners around the strapping through the foam and into the framing beneath. Flash the window as usual with peel/stick or whatever you use. Install the window to the strapping. This eliminates a lot of the thermal bridging in most of these assemblies.

Thank you Matt again!👍👍👍

This is such great info. The solution you are choosing for your own house is awesome. So useful to see all the options within a single video. I'm bullish on thick walls and often see insetting the window against an internal cleat. set within the rough opening. Here's where a watertight pan on the sill is so great. Especially if using stone/concrete sills. Thanks for taking the time to create the video!

Thank you, Matt! This speaks to me.

I am actually running into this same problem on my house I’m building. Thanks for the ideas 👍🏻

I’ve been looking for a video like this for about a year. THANKS!

Great video. Super helpful. Please continue doing these videos on various ways to do these tricky items.

I have been a Glazier for 25 years, and your window details are awesome. I like the fact that my trade is always evolving. Thank you for the lessons!

Thank you for this video. The options you provided are helpful

Matt, you realize that you've made us even more eager for 70s home project videos.

This video is gold. Really valuable info here. Greatly appreciated, thank you. I like innie personally since I like a more traditional look with an exterior sill

Really great. Thanks for the info on mfrs' materials, methods, and ideas. I would want to fly this past the Mfrs'.

Another great video. Thanks for sharing.

Now we need the same video with the interior finishes innie and outie windows! I have been looking for this.

Jeld Wen is offering an exterior extension jamb from the factory now.

Another Great video Brother ! Thank you for sharing this Excellent content.

This is SO helpful. Thank you very much - learning a lot!

Great work Matt. Many thanks.

Very clean install and nicely done with the Prosoco FastFlash on option 4 for the windows.

Love it when you get out there and show us how to install things!

Great video Matt, thank you.

Great video! I will be doing a remodel on My 70s house very soon. Big remodel and landscaping expo in Charlotte this weekend!

This was awesome. Thanks Matt.

how would you fasten the 1"x4" PVC trim to the zip wall? That sounds like a difficult detail unless it is just toenailed in.

Excellent Video Matt!! Can not wait for your "chain saw" retro fit!...as well, when you do the windows on your reno house can you please do a video specifically on your window install!? Thanks ahead of time!

Every time I see one of your videos I want to tear my 20 year old house apart and install your Improvements.

@buildshow

4 жыл бұрын

Me to!

@synewparadigm

4 жыл бұрын

@@buildshow 😂

Architecturally, I like padding out the window so the homeowner can have a nice, deep windowsill on the inside.

Dealing with this today. Thanks

Excellent video. Just what I was looking for. Redoing our north wall up here in Canada. Was planning on exterior insulation using Rockwool Comfortboard as you shown. Have been looking for ways to buck out the existing windows.

Nice job showing your methods Matt! I am still just tickled pink that you are constantly spreading knowledge of building science and what I think should be "standard good building practices." My company is known in my area for efficiency and longevity." That's why we stay super busy despite being a good bit more $ per sq than joe blow down the street. Man if you saw what builders get away with here in my area, it would make you hurt. Honest to the good man upstairs! MO..... Where inspectors will pass anything. Including a deck ledger That's just nailed to the house. It's nuts. Keep informing people! I have a good bit of past, present, and even future clients watching your show to learn the difference between good and what other builders do. Lol Thanks man! Keep up the great work!

Such a helpful video, thanks for sharing!

Ooooo..🤔. Dat real nice! Matt is a Perfectionist 😎🚬 Great video Mr Matt

hi Matt! I'm a contractor in Seattle, re-cladding an older home. We're fans of your "construction philosophy" and we've come up with a design that incorporates your principles but involves a unique combination of materials. Working outwards, we plan to have: 1) (existing) 2x6 studs; 2) (existing) 3/4" shiplap; 3) (airgap/water barrier) Tyvek DrainWrap; 4) (insulation) 1.5" ComfortBoard 80; 5)(airgap/water barrier) Tyvek DrainWrap; 6) 4x8 HZ10 HardiePanel (screwed through lower layers into studs); 7) Stuc-o-flex base coat (sprayed on ~1/8" thick, troweled smooth); 8) Stuc-o-flex acrylic (color-impregnated) finish coat applied (by machine) as a dash coat. Fwiw, Stuc-o-flex reassures us that the base coat should adhere perfectly to the HardiePanel. Also, all new windows have just been installed with appropriate clearances for the above layers. Just wondering if you see any problems with this design? In particular, since you emphasize appropriate air-gapping so strongly, would you be concerned that the force of the HardiePanel attachment (to the studs) would squeeze the DrainWrap so tightly that it ceased to function as an air gap and drain channel? And of course, any other concerns, or improvements? Thanks so much for all the great videos, I never miss one.

@Feedback4Utoday

Жыл бұрын

surprised by all the air gaps.. it is the air gaps that contain air/moisture that can then condense?

This is exactly what i needed to see for my remodel of my 1920s farm house!

It's great to see the options side by side. Now I've got a bunch to think about. As a designer for projects with modest budgets I've been recommending 2x6 @ 24" framing with flash and batt walls, 2-4" closed cell foam and the balance in batt insulation. The less "stuff" there is outboard of the sheathing the less hassle (and cost) there is in construction. But the solutions in this video look manageable even on a budget.

great educational video. great content high-value material. thank you.

"I just cant believe that the installation costs more than the window"... Every homeowner EVER hahahaha.

Glad to see JW windows on your build. Twelve years ago for our remodel JW was the the only window mfg with a stain grade interior jamb/sash and metal clad exterior. The windows are performing nicely and look as good as the day of installation.

@alanswanson1952

4 жыл бұрын

What are you talking about ever hear of Pella Anderson or weathershield they go back to the beginning of clad windows. jW are crap sorry

Thank you!

Great video. Thanks !!!

I still find it interesting after all these years both my grandparents houses 103 years old The other 78 years old all the windows are solid redwood trims and casings exposed to the elements. No caulking no sealants still original stucco on the front sides of the buildings Redwood 8 inch siding on the backs of the houses and cedar shingles on one side of one house no leaks no mold no mildew no rot. No fancy applications no special adhesive’s silicone was not available at that time. San Francisco California with the Pacific Ocean on one side in the San Francisco Bay on the other side.

I absolutely love this. I've always wondered how good builders make thick exterior insulation work!

@thomaswayneward

4 жыл бұрын

Why do you think he is a good builder? He is a green, expensive builder that should be building in DC.

@drakes89

4 жыл бұрын

I'd say anyone who is as anal about building envelope would qualify as an above average builder.

Nice choices - definitely would like the full installation process for option #3.

Nice video. Looks like you guys do quality work, which is hard to find nowadays. And as for any kind of still that extends beyond the window frame, definitely a good idea to have a slop on it.

Matt - totally waterproof. Water - sounds like a challenge. Haha Looks rock solid!

Wish I had seen this video 6 months ago. I installed custom windows and now 1 out of 5 is leaking. I guess those are pretty good odds but it bothers me so bad and I am chasing a leak now.... Thanks Matt I used loads of information and processes I learned from you on my full custom home.

Good job Matt

Would love to see water proofing strategies for window replacements when siding isn’t being replaced.

@shandoe7gw867

4 жыл бұрын

Big Mo Ok I have done a lot of window replacements. Step 1 caulk all the cracks around and in old frame exterior and interior behind trim. Step2 set new window in old frame S.L.P. Or to the reveal of existing opening caulk new window to existing frame sash stop. Step3 clad outside of old frame with metal and caulk to new window. Be SURE NOT to cover weep holes. When in doubt get a glazier to put them in not a carpenter unless you know a top shelf carpenter. Now sit back and enjoy the view you earned my friend!

I really wish you would do one of a historic remodel with a historic window with exterior insulation.

@garethbaus5471

2 жыл бұрын

Unless the window is a litteral work of art I would replace anything that is single pane before i would get around to adding insulation the difference is huge.

As a non-professional home owner windows are so difficult to get right, I know this because the company that built my house failed so miserably back in 1978. The remodel addition in the 1990's before I owned my house is even worse. Thanks for giving me options on doing it right.

Thanks Matt

@buildshow

4 жыл бұрын

Very welcome

Matt, how about showing some us old school guys details for bug screening rain screens for siding. You always just pass over this detail like everyone knows how to do this.

@alpha.gamma.dingdong

4 жыл бұрын

Last I checked Matt doesn't teach the "how to" part of building, he focuses on the why. If you need the how, contact the manufacturer for the recommended installation guides or check youtube and other resources for that info.

@joshuasmith1215

3 жыл бұрын

@@alpha.gamma.dingdong he knows that. That's why he asked.

Thnx. I'm going to be adding exterior insulation to a 1920s house.

It’d be great to have a parts list or even a dwg with call outs, which you must have from your jobs since it seems like everything is engineered.

“Chainsaw Retrofit,” may one of Joe’s top ten! Can’t wait to see it on the remodel series.

@buildshow

4 жыл бұрын

Thanks Mark! Coming soon

sorry I take it back...awesome awesome video Matt!!

thank you!!!!

Really good video. Maybe add in some more shots from different angles as you are describing what is being done on the outside edge of the window, for instance.

great episode Matt

ThermalBuck is a simpler install and easy to work with. Time saver for sure

I was looking for a video like this because my windows will be more shallow than my exterior wall due to the foam. I like the sheet metal idea.

I wish I would have watched this 6 months ago. I replaced all the windows in the back of my house, including removing 2 and adding 1. I just put siding back over everything to cover the chopped up old siding. Now I wish I would have added new window frames and insulated that entire wall as demonstrated here. I know it would have done a much better job.

I’m having a hard time finding a way to deal with my innie windows. I’m adding insulation to my house and am having trouble finding a simple way to waterproof them without changing out the windows. This helps some but this is all new construction. Most ppl are remodeling and dealing with out of date methods and materials. More videos on stuff like that would be a lot more helpful. New construction is easy retrofitting old windows and trim is a lot harder.

2:10 I like this one the best; the window looks better set in from the surface of the siding than with the glass flush or even bug-eyed the way it would be with the other systems. Window glass flush with the siding makes a house look like a trailer. But I'd add an a old-fashioned ledge (it could be cut in a more contemporary shape, maybe with a sloping top surface, if desired) with flashing going out to its edge to keep any water running down the siding well clear of the window, with all of its failure-prone joints. That worked in the past with the imperfect windows they had then and it's reasonable to assume that just about any window made today will be a little leaky by the time it reaches the end of its life.

I'd really like to strip my siding off this spring, and add some zip system and/or extra insulation. Can you show us how to bug seal that air cavity?

@Dancing_Alone_wRentals

2 жыл бұрын

What did you end up doing? I've just started the same and I've no clue. Too many conflicting recommendations. I even made a video about it asking for ideas and help.

on my house in Houston, (doing it ourself), i have first exterior sheathing layer is 6 mm MGO(Magnesium Oxide 4x8 panel (has a layer of fiberglass). Tape up seams for full barrier of all liquid, moisture, vapor, whatever. On top of that 2 inch thick Rockwool, 2ft by 4 ft panels, then on top of that zip system board. Screw in the board with 4" screws to grab studs and squeeze rockwool a little tight (but not too much to keep insulating value) to try to match outside edge of windows and put trim on to receive siding. The zip system is the rain screen, so the rockwool should never get wet. On top of zip system is EVERLAST VYNYL SIDING. never needs to be painted, thick as hardy board, strong, insulating. I believe I'm the first and possibly only person in Houston to get it. Normally used on boat houses. That's the system I'm doing, anyone let me know if they can think of any probs with that system. (also the interior between studs is 2 inch thick rockwool, with the same 4/8 mgo fireproof , water proof, mold proof insect proof board panels inside instead of sheetrock. Considering using 1/2 treated plywood glued to the mgo board with the mgo on the inside. It's also insulating(fiberglass), and wainscoting on inside bottom half of wall, and top half painted or some kind of nice wallpaper)

Please more of this type video ! details of how to do fine details

That was a good video

I want to build a shipping container house do a video on it costs pros cons. You always have great information.

This guys obsessed with insulation

@crpth1

4 жыл бұрын

My 2 cents. I live in a place where the word insulation is, or should be, primary. Rockwool, not necessarily that brand, but the material type. Is by far and wide my preferred choice. In fact beside the initial cost, I never found any other major fault. I start "itching" at the taught of fiberglass and similar. LOL :-) But really fiber is an excellent "sponge" and mold foundation. Rodents and insects love nesting in it. Sound proofing, thermal barrier, etc. Still don't come close to Rockwool. My present house, I believe from early 70's, as been slowly upgraded from 10cm (~4in) fiber to 20cm (~8in) rockwool on the extgerior. I would never go back, what a difference! ;-)

@99beta

4 жыл бұрын

R29 for walls is code in Ontario. 2x6 with R24 insulation and R5 exterior insulation. R15 exterior is recommended.

@lumasjonson

4 жыл бұрын

@@99beta I´m in Santiago - Chile and our requirement here is also r24 wall assy and r15 outside, I install EIFS and i´m doing houses with 15" insul boards and mechanical fasteners, are you a builder in Ontario?

@Hybridog

4 жыл бұрын

@News Now Adirondacks Good tip, notice that Matt Risinger is on their website endorsing the product. 😁

@6string327

4 жыл бұрын

@@99beta I'm doing R-20 in the frame and 2 inch blue foam exterior R-10 so I should be good

So what's the benefit of going with rockwool instead of a Ridgid foam board? Isn't it prone towards holding moisture (even if it won't get damaged, the wood on top would)? I like to have anything, that can hold onto moisture, behind my vapor barrier. You've done other methods before, have you had problems with them? My favorite method is 1-2" of rigid eps/xps/iso board then battens screwed on top to studs and when coming to windows we buck them out with a 2x to the thickness of the foam (not the battens), tape all of the foam seams and THEN we wrap with housewrap and flash as normal (battens go on top of the foam and wrap). The only difference would be we use a J flashing around the windows that receive the trim and can be modified to any siding thickness.

Awesome! I am lazy that way though and thats why i want an architect to lay all those details for me to execute.

#5 Option - Most window manufacturer allow to order nail fin set back. If you plan ahead, order the window for your application

Awesome

I guess you have already thought of this but if you haven't then I would recommend you to remove that long branch that's over your roof. Sure it might not be an issue at the moment though it certainly will someday in the future and better to remove it now than risk having it break and fall on your new roof sometime in the future.

@buildshow

4 жыл бұрын

Totally agreed. It was actually scrapping the shingles! We trimmed back but probably need to remove. Thanks

It would be nice to see insulation reviews start to show and include just how effective cork can be. Also, cork has many benefits to the environment. Is renewable, carbon sink, water resistant, vapor permeable, is almost perfect as insulation.

thanks

Matt, as a commercial glazier, this kind of situation doesn’t have to be a pain but it gets better with a higher quality glazing solution that doesn’t use the residential nailing flange. Many small curtainwall systems make insulation integration so much easier. If I am able to build my house one day, I would love to show you what I mean. Heck, with 10 minutes of your time o could show you exactly. There are so many better glazing systems to use that are far less difficult to work with, maintain, and service. The only down side is cost. The upside is using better sealed units with better finishes and so many potential installations in today’s home designs.

The fire resistant shot sold me..thats the one main thing home owners worry about is their homes catching fire.

Hey Matt. I love your videos, wish they were around fifty years ago. I'm seventy five and building one last project for my wife. I want to incorporate the Comfortboard 80 exterior insulation and would love to know where you found the cap fasteners shown. Keep up the great work, it inspires all of us.

A new house near me in a new subdivision was sheathed in cdx, wrapped in tyvek and then the windows were installed with their own wrap. The brick then went up last. Done. I thought about how Matt would teach them.

Once again... another great AIA learning video. Where's my CEU credit???? :D Great video.

Mr. Risinger, Thanks for your content. Super generous of you to share this wealth of knowledge that I'm sure to decades to aquire. I've got a question. Is exterior insulation with rainscreen formatted differently for board and batten? I thought you mentioned it in another video but I'm unable to find. Also. What if you plan on transitioning from lap to board and batten on the same wall/plane? Any help or pointers would be greatly appreciated. Thanks for the content.

Nice good content