Tom Silva seems like such a kind hearted gentleman. He is dedicated to his work and passionate about everything he does. His family are very lucky to have him! He doesn't look 74 either! Never miss an episode with Tom in it.

The trim looks great and u won’t have to worry about rot. Can’t go wrong there.

I have been watching this great show (since PBS days) for 20 years! Have learned A LOT! THANK YOU!

Tommy always gets an upvote.

Thanks Tom. I have a job just like this to do tomorrow! Those notches will only take a few extra minutes! Thanks so much!

I love the idea of the back and face routing in order to limit water intrusion. Awesome "flashing" technique. Thank you for the content.

finally putting pics of the finished image NICE!

Absolutely beautiful. That is craftsmanship. Work like that is expensive.

You were so confident in your measurements

The show should be called This New House. Brett Waterman from the show Restored would be having a heart attack.

Tom's right! Once in a while u get lucky!!!

Interesting. PVC expands and contracts. Thanks for the video!

@user-ne9wp8ve5u

3 жыл бұрын

Look into “Boral”. Never rots, expands or contracts. It may be a little more pricey but it’s worth it.

Thanks Tom

I love my side piece 😍 0:28

Nice video, thanks!

Great explanation

Excellent video!!!!

This man is a genius

Cool show

Tommy! is the man

Nice 👍

I thought you should never caulk the bottom of a window so water can drain? Or is that just when you install the window to the interior framing and it’s okay to caulk the bottom of the trim casing?

King of Wood

Wish Tommy would have installed our replacement windows. I have come to the conclusion that there aren't many good contractors and if you do find one you're on a long....waiting list.

@pointedspider

3 жыл бұрын

I started a general contractor business because it seemed no one wanted to work. Now, I'm going behind people who are pricing jobs and not showing up, half way doing things (literally, only half a roof). No one wants to work!

@larrymoore6640

3 жыл бұрын

@@pointedspider That's the truth they want the money but doesn't want to do the job. Would like to have someone like you as one of our contractors but like a 4 leaf clover its hard to find.

@timf5963

2 жыл бұрын

I finally found a good window company but the owner didn't want to proceed because the siding wasn't installed correctly. He recommended a company that specializes in siding as well as windows. I appreciated his honesty, but it's all a crap shoot.

What kind of tool are you using for screwing and counter sinking the screw at the same time

Tommy gets lucky all the time doesn't he

Can orig wood brick molding & sill be removed easily to replace with the pvc versions? My Cape was built either 1923 or 32(found pennies under a couple studs)& the entire wood around windows (including storm) are really bad.

A lot of info missing for diy'ers. depth setting for pocket screws due to rabbet joint? rabbet joint depths?

I bet 9 out of 10 contractors are too lazy to do the rabbits.

@rafaelvazquez7465

3 жыл бұрын

More like 9/10 owners won’t want to pay for it

@spydirty2530

3 жыл бұрын

Rafael Vazquez, exactly!

@user-ne9wp8ve5u

3 жыл бұрын

@@rafaelvazquez7465 thank you for the response! Some people don’t understand the cost. Wine taste with beer budget.

@manillafresh57

3 жыл бұрын

@@rafaelvazquez7465 They probably would if given the option. Many contractors just assume everyone is cheap so their default approach is to do things cheap and quick. The default approach should be to do it right, and modify the plan the homeowner needs it done cheaper.

@GrahamDIY

3 жыл бұрын

@@rafaelvazquez7465 there’s not a huge cost (in time) doing that. And it prevents complaints later when the butt joint opens up.

How expensive is PVC trim?

What wood is used for this?

It's a great install - but one key point for viewers - DO NOT, caulk the bottom of the window trim, or the bottom of the window flange. That is a standard practice and the reasoning is to allow water to drain out, there is no need whatsoever to caulk the bottom of the window flange or trim, it doesn't provide any air sealing benefits whatsoever. Things like rod and caulk and proper interior window sealing techniques deal with the bottom of flange and trim being open and providing drainage. Do not follow the advice of caluking the bottom of a window or bottom of trim if you are looking for the best practice that makes sense. Otherwise, the video is great and they did a great job. Surprised these guys don't know that.

Can you paint the PVC?

First great video. Question would water (rain) really get up to the top of the window with those gables? I could see water near the bottom with a heavy wind. Seriously asking, would it get that high?

@trucksguns6898

Жыл бұрын

People hose down their house siding to get the dirt off especially if they live in a dusty environment. Even if you don't the next person who lives there might do that.

What size rabbet bit ? Thanks

Just learned how to fire a poor contractor! This is a important step and should be followed of professionalism is required

Whats the point of doing the rabbit if you glue and screw it together? How much could it possibly move after doing that?

Can't paint that stuff where it will last though.

I noticed that you put calking on the bottom of the windows and I thought that you weren't supposed to do that because if water got behind there it would go back in?

@bruizzz13

3 жыл бұрын

Not a carpenter at all but maybe it was for air drafts?

Where can you purchase the window lower sill piece?

@user-ik8kx7yw2p

4 ай бұрын

Called Historic sill....Buy it by the foot any place that carries Azek PVC trim

Hardly board window trim

dont think waters a problem with the over hang

What brand is that pocket hole jig?

@borys444

3 жыл бұрын

Kreg, it’s actually on sale for Black Friday right now at Home Depot for 80 bucks versus the normal 100.

He doesnt use a Kreg often.. need to hit bottom and pull up before spinning that baby or you will ruin bits quick

Good video. You should use the Blue Kote screws rated for the exterior. The screws used at 4:02 are not exterior rated screws.

@skylark4901

11 ай бұрын

Knowing Tom, those were more than likely stainless steel. (I just feel like I know Tom 😀)

I would think such a tight fit does not allow for the natural expansion/contraction. so it will break and delaminate I would think... . Am i right?

@Tangue0

2 жыл бұрын

I was thinking the same thing. There were a few details in this that I would think you'd want to do differently. However, these dudes know their stuff and I'll leave it at that.

you can really see the dirt and holes on that. Do you sand and paint these after install?

@skylark4901

11 ай бұрын

You should clean up the PVC and wash your hands before you put the plugs in, also it's a good idea to put a piece of tape on the hammer to keep from transferring the dirt, I've found that cleaning your hammer isn't good enough, also find a hammer that isn't "marred". I don't think you need to sand, that's really not my thing, I do know you can paint

@user-ik8kx7yw2p

4 ай бұрын

Use a waffle head hammer...that really looks good....Lol@@skylark4901

Hi could you tell me what type bit you are using in the router?

@rickteeden8656

3 жыл бұрын

1/2 rabbet bit

You bonded the casing with pictures cement. Its not going to expand and contract at any joint. It's welded.

@lydialas8756

Жыл бұрын

@Hello John how are you doing

Safety first gang! PVC dust is a very well known carcinogen. A quick google search: Specifically, PVC has an association with a rare kind of liver cancer called hepatic angiosarcoma. Prolonged exposure to PVC could also result in a condition commonly called vinyl chloride disease. The symptoms of this condition include numbness in the hands, joint pain and skin changes, including changes in color, thicker skin and edema.

@EricRohlfs

Жыл бұрын

I think that is why they are using it on the outside. PVC is especially nasty if it catches on fire. But it is more rot resistant than wood. Wood is great if you want to re-paint every few years.

first comment

@demagab

3 жыл бұрын

@Corat I hope the claws are at least three quwootah of an inch, because the money is in the detail

Ive specialized in windows and doors for the last 8 years installing mostly residential replacement vinyl windows, patio doors, and wood/aluminum entry doors. I cant say I've ever seen anyone trim windows like that or trim anything with those kind of joints. I mean it makes sense for the Mulls but just seems unnecessary. Personally I trim all my windows and doors by capping with custom bent aluminum trim coil, with or without fresh wood going on first and being wrapped with aluminum, that depends on the situation some times the wood isnt necessary..

@louf7178

3 жыл бұрын

I have to agree, but it is great to see fundamental issues addressed. (Another that should be addressed is saw-cut concrete joints - a radiused edge will not have the stress concentration that 90 degree saw-cut joints do, especially at intersection corners. Check them out; all new driveways chip away at these places, and this is why.)

I’m sorry but why do they keep posting the same videos I’ve seen before!!

@4212daniel

3 жыл бұрын

then go to there website and watch the rest of them simple as that

@spydirty2530

3 жыл бұрын

*their website It’s as simple as that

Glue all over the trim, looks like crap