Do you still have the SC project installed. I am going to order mine. Your video helped me make up my mind

@Victor_Moto

2 жыл бұрын

Awesome. Congrats. Fun Fact: a friend of mine actually totalled the bike. Unfortunately. He did not get hurt so all good. And, we were able to remove the full exhaust system, not a scratch on it.

@mr.stickyfingers3189

2 жыл бұрын

@@Victor_Moto yikes, good to hear he’s good.

Awesome video man. Sounds like a Ducati! Introducing your staff is brilliant for your business. Do lots more!

@Victor_Moto

3 жыл бұрын

Thanks, Jaret! I'll do more of that at both shops. They're the superstars anyway.

@mac5917

3 жыл бұрын

Sounds like ducati on idle but alot better on throttle

@Victor_Moto

3 жыл бұрын

@@mac5917 you said it.

@kaihartmann924

3 жыл бұрын

Yeah, it sounds beautiful! I always disliked the parallel sound but this is great.

@ODDFUTURE626

3 жыл бұрын

Next build?? Lol

Fantastic! Thank you for uploading and all the different sound clips. Looking forward to more videos, especially when you all put it on the dyno.

@Victor_Moto

3 жыл бұрын

That's the plan ! Thank you.

@KhalidMA

3 жыл бұрын

Good job. Where I’m writing from, a ‘rampage’ on motorcyclists Is underway - mainly for Exhaust Sound Levels, and, other legal stuffs .. So, made a video for my fellow bikers here on the legal test standards, as linked below, Wonder if it’s exactly typical to that of yours, over there? kzread.info/dash/bejne/gJVlqqirZZrYZ7g.html

So impressive! But what's also impressive is your obvious passion for, and commitment to the brand. Well played sir!

@Victor_Moto

3 жыл бұрын

Thank you, Alex!!

Dude this bike is just so beautiful....

@Victor_Moto

3 жыл бұрын

Agreed! Can't wait for the fender Eliminator kit and solo seat cover.

@bredski1681

2 жыл бұрын

@@Victor_Moto hi do you know a website that has the solo seat cover available? I appreciate any info thanks

@Victor_Moto

2 жыл бұрын

@@bredski1681 negative. I think we're all still waiting.

@Victor_Moto

2 жыл бұрын

@@bredski1681 solo seat covers are arriving tomorrow.

@bredski1681

2 жыл бұрын

@@Victor_Moto let me know where i can order one thanks for letting me know!

As the proud owner of a RSV4 with full Arrow race system, i couldn't agree more about the sound of Aprilia bike's...at full noise my bike sounds like a GP bike...fuckin awesome 🙏🇦🇺🇺🇸🙏

@Victor_Moto

3 жыл бұрын

100%

@hotbox76

3 жыл бұрын

I have a 16 tuono factory with the akra race pipe, and it definitely sounds like a GP bike when you let her rip :)

@Victor_Moto

3 жыл бұрын

@@hotbox76 Oh yeah. The big Aprilia V4's are the best sounding, period.

@black350Z

3 жыл бұрын

I've got a '15 RSV4 with the SC Project GP-70R. It's mind blowing. Everyone raves about how good (and loud) the bike sounds.

Gorgeous sound, thanks very much for the vid guys!!

@Victor_Moto

Жыл бұрын

Our pleasure. Thanks for subbing. More soon.

Boy it sounds amazing!

@Victor_Moto

3 жыл бұрын

Sounds bigger than it is.

Awesome man .literally sounds like ducati ,nice video

@Victor_Moto

3 жыл бұрын

Thank you ! More soon.

Best Aprilla sound ,fair play Lads.

@Victor_Moto

3 жыл бұрын

👍

The sound is amazing. I like the belly exhaust for lean clearance though. I know the can won't scrape, but the can and the rearset out from the wheel centerline are even. Just remember to get that knee out, triangle of daylight to not scrape. Rode the 660 at Laguna Seca and found the front straight is not so long. Thanks for the upload.

@Victor_Moto

3 жыл бұрын

That's right !

Ordered mine today !! Straight from Noale !!

@Victor_Moto

3 жыл бұрын

Smart man.

Wow this bike is very equilibric , just perfect for everybody, city, race, for joung and for go to work or everywhere!Good sound and superbe esetics! I love Aprilia

@Victor_Moto

3 жыл бұрын

Exactly!!

Sounds so nice!

@Victor_Moto

3 жыл бұрын

Agreed!

Great video buddy!

@Victor_Moto

3 жыл бұрын

Thanks, Nate! Thank you for reaching out. You guys rock!

Thanks for the video, did I hear the technician say that if he did the install again he would remove the radiator as it is quite fiddley? I get my RS 660 late May and I have just ordered and SC project. Did you put it in the Dyno with out flashing the ECU, if so what did the af come out as?

@Victor_Moto

3 жыл бұрын

Yes, removing the radiator would be best unless you have small skinny leather hands.

It definitely sounds way better. But I've gotta say the stock look is so much cleaner.

@Victor_Moto

3 жыл бұрын

True. Cleaner, yes.

Hey, Victor Moto, just wondering if You could measure with caliper the exact diameter between the link pipe and the muffler? It looks much bigger than on Akra.

Getting my aprilia rs 660 and will definitely have this exhaust in mind , sounds perfect !!

@Victor_Moto

Жыл бұрын

It's my favorite. Wait until you see the new lower fairing/belly pan to cover that open space.

@jrsalazar24

Жыл бұрын

@@Victor_Moto I definitely see why lol , and i kinda like the open space but if its a nice cover maybe in black , will definitely get that as well

@dl6ix

10 ай бұрын

@@Victor_Moto hey victor, do you have a link for the belly pan/lower fairing?

@Victor_Moto

10 ай бұрын

@@dl6ix the carbon one?

I agree, this is the best good looking exaust so far. I hope they also make a street version

@Victor_Moto

3 жыл бұрын

What country are you in?

@Nairox85

3 жыл бұрын

@@Victor_Moto Switzerland

@sanity7240

3 жыл бұрын

@@Nairox85 Eyy, me too! Grüezi :) Really hope there'll be more street legal exhausts. Maybe an underbelly exhaust system?

nice and interesting video!

@Victor_Moto

3 жыл бұрын

Thank you!

sounds so good, only downside is that the lower fairing looks a bit naked. I noticed you removed the mirrors, did you get the integrated blinkers in the headlight to work?

@Victor_Moto

3 жыл бұрын

Agreed about the lower fairing! Looks a little unfinished. We did not move the signals into the headlight but we did try. A CAN bus will be needed to make that work. We'll keep an eye out for one so we can do it.

Did you have the upmap or tube installed when you took this video? Or when the exhaust was installed? And do you think it’ll damage the engine or anything if you don’t put it right away?

@Victor_Moto

2 жыл бұрын

I did not map this bike at any point. It did not seem to compromise its performance. It ran strong. BUT...I've ridden RS 660's with the UpMap by GRT and it's much improved.

hey im wondering if you can keep the passenger foot pegs with this exhaust or you can adapt it somehow to still have a passenger

@Victor_Moto

3 жыл бұрын

No. Not without a custom bracket.

Nice video - one question: Is there a db killer and the mounting thingy inside the package? On the SC Project website it's only written that these parts are available but for me its not clear if they are coming with the package! t

@Victor_Moto

3 жыл бұрын

Yes, a DB killer and muffler hanger (replaces the passenger peg) are included.

Great video. Looking forward for a same video but with an Akrapovic.

@Victor_Moto

3 жыл бұрын

They'll be here soon.

Looks like a proper faff to do even if you have the bike stand and all the right tools.

@Victor_Moto

3 жыл бұрын

It is a proper faff.

Sounds amazing for twin cylinder

@Victor_Moto

3 жыл бұрын

And it sounds like a 900+

Will this void factory warranty if bought at your location?

Awesome video Victor...very informative....by the way do you sell the shirt that Brian is wearing? Keep these videos coming!!

@Victor_Moto

3 жыл бұрын

I think we're sold out of that shirt but I'll check. Thank you for the encouragement! I'll keep em coming. 😁

Do you still have an RS 660 shop bike with the SC project installed? I have been waiting to see you install a race ecu or upload a map. I've got my RS 660 now and its a great little bike.

@Victor_Moto

2 жыл бұрын

A friend of mine actually wrecked it. But we'll still do it on another one.

Victor, did he have to loosen/move the radiator in the end or is it all possible to work around it? TY

@Victor_Moto

Жыл бұрын

Much easier if you loosen the radiator but you can work around it if you have smaller tough hands imo.

Hello, I'm sorry, I want to ask you a question. I also installed the same exhaust as you, but the engine light flashes after the installation. Do you need to update the ECU or something?

@Victor_Moto

2 жыл бұрын

Can't say with certainty without inspecting your bike but in general, the exhaust should not cause that light.

@herbivorousbear9589

2 жыл бұрын

@@Victor_Moto OK l will try again~thank you so much

Outstanding video! I just pick up a RS660 and been looking around for a exhaust system that is still inter-grated with the body line. I love the clean factory look all tucked away. Does anyone know of any companies that offer something like this? Thank you for any help!

@Victor_Moto

2 жыл бұрын

MIVV and Two Brothers are down low. Check them out. We have a 660 here with the Two Brothers, it looks good, to my surprise. It's very loud!

I saw in one of your replies that you were going to try the jet prime tuning module. Have you gotten a chance to try that?

@Victor_Moto

2 жыл бұрын

No. We just received a stocking order of Upmap for the 660's. I'm installing it on Orlando's RS 660 this week. His bike has the same exhaust as this one.

Hi! What exhaust hangar is that? I just bought this exhaust and am wondering, thanks!

@Victor_Moto

3 жыл бұрын

That comes with the SC Project.

Hard to tell from the video, but does the passenger peg block installation of the muffler, or does it just not line up? Wondering if I could fab a bracket to make it compatible with passenger pegs.

@Victor_Moto

2 жыл бұрын

It just does not line up.

@gregthomas9153

2 жыл бұрын

@@Victor_Moto awesome, thanks dude! Have one on order, planning to fab an aluminum or cf bracket to keep the passenger foot peg for my daughter that begs to go on rides lol

from cat to a lion roaring sound!! holy legit👍🏻😘

@Victor_Moto

2 жыл бұрын

😁🙌

Great video… I’m shopping for a bike right now looking for a 600 instead of a 1 liter for a daily work commute especially with gas prices in Cali, Agree with you 💯 looks good and sounds good…

@Victor_Moto

3 жыл бұрын

The Tuono 660 would be awesome for that.

Great Video, I have just bought the same trofeo exhaust also and was wondering if I can fit it without a ecu mapped or adding a power commander? or can I just fit it and ride it? Thank you.

@Victor_Moto

7 ай бұрын

In my opinion, mapping it is not critical but I recommend it if you're doing that exhaust. I like the Gabro Racing maps via UpMap.

@pointblankracer6274

7 ай бұрын

Thank you for the speedy reply and the heads up about the UPMAP with Gabro racing App, I live in the middle of nowhere in Wales in the UK so that app is a gods send if it works out. So thanks again for all your help, it's made my day.@@Victor_Moto

Hey Victor, where did you order the solo sear cover for the passenger seat? Thanks!

@Victor_Moto

3 жыл бұрын

I'm an Aprilia dealer. Where are you located ?

@JuanAntonioAdrover

3 жыл бұрын

@@Victor_Moto I am in Spain, not in the US... I have been told by my dealer that the covers won’t arrive until May so that is why I wanted to ask you. I don’t know if you ship internationally?

What's the tq spec for the 4 header bolts and what year rsv4 mirror block off/part number ? Please and thank you

@Victor_Moto

3 жыл бұрын

Just got this. I'll ask Brain tomorrow when I see him.

This may be a stupid question but are there no gaskets with these exhaust systems?

@Victor_Moto

2 жыл бұрын

Does not come with gaskets.

Loveee it! Quick question, is there a particular reason you picked this one over the cr-t? Thanks!

@Victor_Moto

2 жыл бұрын

Yes, it's loud but not too loud like the CRT.

@JamesBond-ph6hr

2 жыл бұрын

@@Victor_Moto appreciate the answer, I’ve been hearing the cr-t is too loud.

Awesome, adds some much needed bark over stock system! Any improvement on power?

@Victor_Moto

3 жыл бұрын

The common response is more midrange.

Will Aprilia void your warranty if the bike is tuned to run this pipe setup?

@DevRSVR

3 жыл бұрын

I dont know about this SC project setup but Aprilia do have an official Acrapovic system you can get and that would be covered id imagine. Comes with remap software i believe? About 2 thousand yoyos though!

Hey there Victor, did you remapped after installing the exhaust? Thanks!

@Victor_Moto

3 жыл бұрын

Not yet.

@JuanAntonioAdrover

3 жыл бұрын

@@Victor_Moto looking forward to it then! Thanks 😉

Did you have to drill the endcap to remove the Baffle? Doesn't seem to show how the baffle was removed in the video. Beautiful looking exhaust, mine is on the way! Edit: After watching the whole video I saw no drill holes. I know with many past SC Project exhausts you had to drill them. How did you get it out?

@Victor_Moto

2 жыл бұрын

No drilling. There's a screw. Remove it before installing the muffler from the intake side.

Amazing bike 😍

@Victor_Moto

3 жыл бұрын

Buy one. ;)

@Tony-cc2xr

3 жыл бұрын

@@Victor_Moto I am a happy owner of a caponord 1200 rally with 87.000 km - 54.000 mi 😁 i love aprilia motorcycles

@Victor_Moto

3 жыл бұрын

@@Tony-cc2xr me too!! I have a 2015 Caponord 1200 Travel. I've put 25,000 miles on it in 10 months. 😆 Love it. Especially after I put RSV4 Forged Aluminum wheels on it.

@Tony-cc2xr

3 жыл бұрын

@@Victor_Moto very nice bike 😍 in july i'll go in nordkapp (north norway)

some how it felt like it sounds quite similar with the MT07 after changing to the Akrapovic even on the fly by, but nonetheless still a sick bike packed with features !

@Victor_Moto

3 жыл бұрын

The electronics package is the big deal.

do you need to remap after installing a sc project sports exhaust????

@Victor_Moto

3 жыл бұрын

"Need"? No. Recommended? Yes.

aprilia ,.. uma vez mais , faz outra obra de arte sobre 2 rodas ,.. que moto perfeita ,..!!!

RS660 is a pretty compelling bike. Good on Aprilia. Side note, weird yet relevant question: what pants are you wearing in the last 30 sec of the video (stock v SC)? Looking for pants that I can commute in to the hospital that are still business casual.

@Victor_Moto

3 жыл бұрын

Taichi Cargo pants. I have three different colors, I wear them every day. Literally. motoclubofficial.com/quick-dry-camo-cargo-pants/

Almost 3kg, every bit counts for a race bike, but for a street build that's not much. I'm amazed how light Aprilia made the stock Euro 5 exhaust.

@Victor_Moto

3 жыл бұрын

I thought 3kg was significant for one part swapped out.

@DarkInovator

3 жыл бұрын

@@Victor_Moto :D Point taken. I was thinking more from the mindset of street riding. Is it worth loosing the tidy look of the underslung exhaust to get -3kg

@Victor_Moto

3 жыл бұрын

@@DarkInovator Good point. Debatable.

I liked the sc project, but what I didn't like is that the tube is uncovered and looks ugly. Any way to put a cover on it like the original has it?

@Victor_Moto

2 жыл бұрын

For this exhaust you would need the race faring to cover that section.

Pls i need to know if I install this exhaust do you need to remap the bike or you can ride without remapping?

@Victor_Moto

3 ай бұрын

You don't need to but I recommend it.

Sounds awesome. I’m a big fan of aprilia noise 😎. Still waiting for an underbelly exhaust though.

@Victor_Moto

3 жыл бұрын

Soon enough.

Is it worth buying it when i would use it with buffler? Was the testride with buffler? Greetings

@Victor_Moto

2 жыл бұрын

Tested without baffle. I think it's worth it, yes.

By creating a two-hole bracket I can keep the passenger footboards right? Thanks in advance for your reply!❤️❤️

@Victor_Moto

3 жыл бұрын

Yes, a small two hole bracket should do it.

@jackr3309

3 жыл бұрын

@@Victor_MotoThank you so much 😍🙏

@Victor_Moto

3 жыл бұрын

@@jackr3309 anytime.

@4trmotorsports802

3 жыл бұрын

What do u mean a two hole bracket? I ordered my exhaust and i wanna make sure I can keep my passenger pegs.

Stupid question but how did you take the DB out? Just installed mine but I have trouble getting it out

@Victor_Moto

3 жыл бұрын

Pliers and a spring hook.

@absolutnosty

3 жыл бұрын

@@Victor_Moto thanks! Got it, had to pull it from inside out! Lol

Wicked sound!

is it possible to continue to use the pillion footrests?

@Victor_Moto

3 жыл бұрын

It's not designed for that. It would take some modification. I don't recommend it.

Nothing but the Best..... Aprilia...........❤❤❤❤❤❤❤❤❤❤❤❤

@Victor_Moto

Ай бұрын

100%.

It is not possible to put this exhaust keeping the footpegs for the passenger? Thanks in advance.

@Victor_Moto

3 жыл бұрын

Not without a custom bracket. But, no, it won't fit on the stock passenger peg.

gracias compa

@Victor_Moto

2 жыл бұрын

De nada.

Hey what was the stuff that he wiped the inside of the muffler with

@Victor_Moto

3 жыл бұрын

I'll ask and reply tomorrow. If I remember correctly, it was to prevent discoloration.

Is it possible to still keep the foot peg with the exhaust mount?

@Victor_Moto

Жыл бұрын

No, not with this Teofeo exhaust. Yes with the SC1R stainless steel headers version.

Great vid! How long does it take? my dealer says over 3hours...

@Victor_Moto

Жыл бұрын

3 is fair in our opinion. Not more.

That's nuts, sounds like a baby RSV4 or Tuono

@Victor_Moto

3 жыл бұрын

Agreed !

does look and sound the best thus far. I would like so see someone make a shorty. Not thrilled about see that open space on the lower fairing and not that you would use it much but would be nice to keep the passenger pegs

@Victor_Moto

3 жыл бұрын

Race fairings covers that area. But agreed,

@craigloomis20

3 жыл бұрын

@@Victor_Moto cool so you going to race it, nice. I do want one but availability coupled with what may happen with Yamaha's R7 and other trims Aprilla may release has be a little on the fence.

@Victor_Moto

3 жыл бұрын

@@craigloomis20 The R7 will take a couple years at least.

Does the ECU need a flash after this install or not? The Akra one has a flash I believe.

@HormigaZ

3 жыл бұрын

Yes. Unless you're willing to ride the bike with an AFR of about 15 or so, which you probably shouldn't

@Victor_Moto

3 жыл бұрын

We'll confirm soon.

does the "fueling" need a "fix" after this mod??? I thought it sounded better with the "insert" in there... at-least over KZread.

@Victor_Moto

3 жыл бұрын

Nothing felt lacking while riding it. Felt amazing actually. But we'll find out more on the dyno.

hi will i have any problems with check engine light coming on if i just install my sc project exhaust without any tune? thanks for any info

@Victor_Moto

2 жыл бұрын

No, you should not have that problem.

@bredski1681

2 жыл бұрын

@@Victor_Moto thanks

I gotta ride one of those.

@Victor_Moto

3 жыл бұрын

EVERYONE comes back with a smile.

I was torn between this and the CRT. I really want the CRT but I live in an apartment complex and I like to listen to music while riding, so I don't think the CRT is conducive to either of those being enjoyable experiences. Now I just have to find a good place to purchase from. Thank you for this video.

@Victor_Moto

5 ай бұрын

The CRT is too loud for me, too.

@Victor_Moto

5 ай бұрын

If you're in the USA, we can ship it to you. Our install it for you if you're local.

@IGMOW

5 ай бұрын

@Victor_Moto Thank you for the reply, sir. I was on your website, and I must have missed this exhaust. I did not see it listed, please advise. I am in Ohio, so unfortunately I can't have you install it.

You just keep the same map? Does the ECU make the adjustments on its own?

@Victor_Moto

3 жыл бұрын

Two things to note: there is no exhaust valve. This exhaust uses the stock O2 sensors.

@sarahdell4042

2 жыл бұрын

These run super lean when adding an exhaust. If you want the bike to last, change the mapping ASAP. Not to mention, it will make less power with the exhaust on stock map.

I really want to see an Sc Project S1 fitted in one of these.. I really don't like the muffler that's available for it.. Sc1-r looks huge and does not fit the bike.. You guys did a killer job though!

@Victor_Moto

3 жыл бұрын

Thank you. I'm sure there will be an S1 for it soon. No doubt.

Bro is it possible to have pillion foot peg with this exhaust ?

@Victor_Moto

Жыл бұрын

Not this Trofeo titanium version. But yes to the stainless version SC1-R.

Super coool

@Victor_Moto

3 жыл бұрын

Thanks Kee! It's your bike. 😉

@RidingwithKee

3 жыл бұрын

Victor Moto yeyyyy 😍😍

I still like the stock thou❤️

@Victor_Moto

3 жыл бұрын

The stock look is great. And it sounds very good for stock.

Hey did you get your ECU changed or power commander installed

@Victor_Moto

3 жыл бұрын

Not yet. Waiting for the tuner module to arrive.

@christianmiller8691

3 жыл бұрын

Ok thanks what’s the stuff that’s wiped inside the muffler

What ecu tune do you recommend?

@Victor_Moto

3 жыл бұрын

None yet. Looking at JetPrime as our first test.

Hey guys! I am about to install my SC this week. I would like to know if it is mandatory to use the anti-seize grease on the sensors and joints! If so, what kind of grease or paste? Thanks!

@Victor_Moto

3 жыл бұрын

Stand-by...

@JuanAntonioAdrover

3 жыл бұрын

@@Victor_Moto thanks a lot!

@Victor_Moto

3 жыл бұрын

@@JuanAntonioAdrover I'll answer tomorrow. I don't want to bother my Techs on their day off. 👍

@JuanAntonioAdrover

3 жыл бұрын

@@Victor_Moto I really appreciate your help! 👌✌️

@JuanAntonioAdrover

3 жыл бұрын

@@Victor_Moto hey! Has the chance to find out about it? Thank you!

Someone please make an exhaust that fits where the factory one was, that huge exhaust throws off the aesthetics!

@Uninfluenceable

3 жыл бұрын

yeah, not a fan of the giant void underneath the bike now. Also the weight savings were not as much as I though, so I probably would skip on this exhaust.

@Victor_Moto

3 жыл бұрын

Just a matter of time.

@johncookson9748

3 жыл бұрын

Take a look at Mivv exhausts from Italy. They produce an underslung unit to replace stock, factory one. Cheers

@Victor_Moto

3 жыл бұрын

@@johncookson9748 Bingo! Thank you.

@scottielentz9401

Жыл бұрын

Two brothers has a good one.

You should an exhaust package on the new Aprilia Tuono 660! I plan on getting one of those very soon! I almost have enough saved up

@Victor_Moto

3 жыл бұрын

We're installing the Akrapovic on a Tuono 660 soon. We have the Exhausts and bikes.

@dylanw890

3 жыл бұрын

@@Victor_Moto Thats awesome! I am looking forward to seeing that upload!

I hope that bike is ready in Indonesia :)

@Victor_Moto

3 жыл бұрын

I hope Indonesia is ready for this bike!

I am very surprised that with the baffles out, the noise is still at 90db. I hate overly loud exhausts and so does pretty much everyone else when we ride around them, so this SC is definitely a good choice in my eyes, or ears. 😉

@Victor_Moto

3 жыл бұрын

Turns out, the phone can't read more than 90db!

@baloonia1

3 жыл бұрын

@@Victor_Moto I see, well it is hard to hear how loud really it is trough the video, but I will still look into it.

Do I need to get a full ecu tune when I do a full exshust?

@Victor_Moto

Жыл бұрын

"Need"? 🤷🏻‍♂️ It's recommended.

@ktm-kr9mm

Жыл бұрын

@@Victor_Moto how without voiding warranty?

Could you please tell me what the first song is?

@Victor_Moto

Жыл бұрын

Don't know. Sorry. Feel free to clip the audio and use it.

Did it need tuning after install.?

@Victor_Moto

10 ай бұрын

No.

What is the top speed after evu flash and the after market exhaust??

@Victor_Moto

3 жыл бұрын

Haven't flashed the ECU yet. Working on that including our 2021 RSV4.

@chumantar858

3 жыл бұрын

@@Victor_Moto awww than the thrill is yet to come

I wonder if it sounds better than my MT-07 w/ Toce

@Victor_Moto

3 жыл бұрын

Do not wonder. It does.

It’s possible to have this exhaust with passenger peg ?

@Victor_Moto

2 жыл бұрын

Simply put, no. Unless you modify the mount.

Any of you know it it’s possible to take apart the stock exhaust and run through the pipe just the housing? So it doesn’t look so empty down there? I love the look of the SC but not having that fitting piece in there makes it look like something is missing. Or maybe someone will come out with a carbon fiber piece to fit in there.

@Victor_Moto

3 жыл бұрын

I don't imagine gutting out the stock exhaust will ever be an option. But a belly pan for an aftermarket exhaust should be available soon.

@rzrpwr

2 жыл бұрын

@@Victor_Moto Thank you. I'm hoping for that as well. Also, from this video when I saw he took off the shiny piece I was wondering if that could be used if the gray triangle would be removed. I'll have to find out irl as I'm getting this bike soon finally.

@rzrpwr

2 жыл бұрын

@@Victor_Moto Although I've just noticed the shiny cover is attached to the stock exhaust not to the fairing so it would need some creativity to use that. A belly pan will definitely be a better option.

@Victor_Moto

2 жыл бұрын

@@rzrpwr Good luck. Let me know if you have any other questions.

How do you SC project exhaust run without a tune or power commander

@Victor_Moto

3 жыл бұрын

It actually runs fairly well.

@sarahdell4042

2 жыл бұрын

It needs a different map. Toss this on a dyno with the exhaust, and you will see it runs incredibly lean.

@Victor_Moto

2 жыл бұрын

@@sarahdell4042 I'll do that if I get the opportunity. Other than dyno date, this bike has been running strong at many race tracks.

Hallo do you have the linl for this exhaust

@Victor_Moto

2 жыл бұрын

I have one in stock. As of today.

Great video. Sadly can't be fitted in the UK, as the bike has a separate pillion seat UK law states that for that seat you must have foot rests as part of regulation. Sounds Lovely though. My RS660 should be here in April 2021

@Victor_Moto

3 жыл бұрын

Wow. So strict.

@melsmotors

3 жыл бұрын

@@Victor_Moto there are ways around it, remove the rear seat and fit a cover, no seat no pegs required.

sound like a mt07 or ducati, pls tell me the turth

@Victor_Moto

3 жыл бұрын

Sounds like an RS 660. 🤷🏻‍♂️

how does the sound compare to jaret campisi's v2??

@Victor_Moto

3 жыл бұрын

Oh! Good question. Let's do a side by side comparison. I'll do that on April 10th during his giveaway event. I'll bring this bike to Santa Barbara.

@junpark1707

3 жыл бұрын

@@Victor_Moto thats awesome, thanks!

Well there goes having my gf ride passenger on my RS 660 once I get it. No passenger pegs but need that SC Project exhaust. Gonna have to keep my Daytona 675R for couple riding.

@Victor_Moto

3 жыл бұрын

If one could make a small custom bracket, you can keep the passenger pegs with the SC Project.

@Frank_Torre

3 жыл бұрын

@@Victor_Moto Can't believe I didn't think of that. Saves me there. She loves to ride but for some reason can't convince her to get a bike of her own.