Ewor Stingray part 7: Making a scarf joint on a CNC machine
Тәжірибелік нұсқаулар және стиль
This is the Seventh video in the Stingray guitar building series where I will be creating a scarf joint the multi laminate neck blank with tapered inlays
#vcarvedesktop #vectric #cnc #nextwave
Пікірлер: 18
With your videos I know I don't have to wait to the end to decide to hit the like button, I smash it before I hit play.
Great looking neck David! Great video.
looking really good
Happy new year. Happy new guitar.
I’ve been learning not guitar making and running my own CNC I got just before you got yours and I’ve had pretty good luck drawing some simple things like radiuses, angles for scarf joints etc in fusion 360 which is free. May try it. I just made a sanding block with a 12” radius for fret work and I’m pretty proud of it 😂. You just draw it in fusion and export as an stl that can be imported into Vcarve. I could show you sometime if you’d like.
Happy new Year Dave great neck and thanks for showing your processes on how you do a scarf joinred neck
Great content Dave , Happy New Year
I love seeing these but hate waiting on new ones 😂
Great to see your video's again! The best whishes for 2023 and that you may build a lot of your geourgeous guitars!
Dave do you have any vids with your jig designs? Great work BTW
3D-cutting of a 14 degree angle requires using a ball endmill, resulting in a scalloped surface, that needs leveling. Cutting the surface flat by placing it in the needed angle can be excecuted with a flat endmill. I'd stick to your method. I do, although I work with Fusion and am able to cut 3D.
@eworcustomguitars
Жыл бұрын
I am looking forward to learning fusion.
Nice video Dave. I think this will end up being a really nice guitar as all of yours do! Happy New Year. ✌️ & 💕
I get something out of every one of your videos.
@eworcustomguitars
Жыл бұрын
Thanks brother!
It is my understanding after talking to the people at next wave, you can't write g code files in fusion 360 for vcarve. Unless you know how to write a post processor for next wave that will work with fusion 360.
@eworcustomguitars
Жыл бұрын
I think what I will have to do is use vcarve for the 2 d milling and fusion with its cam for the 3-d parts
do you sell a measured drawing of that neck jig