Subscribe, like, share! More battles and DIY’s to come! Instagram: Xtra_Slo
Жүктеу.....
Пікірлер: 34
@sup8o86 жыл бұрын
Great instructions, the picture in picture is awesome
@pawelbn62113 жыл бұрын
Thank you very much, as I saw the service manual then I felt slightly confused, that's not what honda gave. Thanks to you, the bumper came down in 10 minutes. I don't have a screw behind the license plate ;)
@SmartiesSniffer5 жыл бұрын
Great video! Had to replace my bumper cover and I couldn’t have done it without this video
@xtra_slo1596
5 жыл бұрын
Herpopotamus 🙌🏼 glad this helped!!!
@whiteevilgsr59604 жыл бұрын
Great job👋👍 now I can actually buy my carbon fiber rear bumper insert to install since you already shows me how to remove my Evo x rear bumper 😂
@xtra_slo1596
4 жыл бұрын
Yaertu Śii Great! 👍🏼
@girishlg4164 жыл бұрын
Superb video. Very simple and easy to understand. The picture in picture is just fantastic. I especially loved the way how long bar clip would appear before proceeding to removal of bumper. Many do not preview just as you do. Great job!
@xtra_slo1596
4 жыл бұрын
Thanks for the feedback and compliments! 👍🏼 glad it’s helps
@attilanagy47694 жыл бұрын
I had to change the license plate light assemblies and your video was really helpful, thank you!
@xtra_slo1596
4 жыл бұрын
Attila Nagy great! 💪🏼
@milli15506 жыл бұрын
Nice filmography!
@kenmaller24563 жыл бұрын
Excellent video 👍
@stewiemac40172 жыл бұрын
Brilliant thanks, much appreciated
@supernice_auto Жыл бұрын
great video bro, thank you!
@SPIDERKING7772 жыл бұрын
I have a 07 Mitz Eclipse. Is changing the bumper that easy for my car as well?
@T4NKBOSS5 жыл бұрын
Great video, i think i have snapped the plastic bracket on the left hand side on a spirited drive on some bumpy terrain on the weekend, this will help me remove the bar to check, cheers.
@xtra_slo1596
5 жыл бұрын
Rekstafa Excellent! Glad this helped!
@sonofdr.xtimliss28113 жыл бұрын
Thanks brutt, well said.
@hobygarage63744 жыл бұрын
nice video
@DavidLamison5 жыл бұрын
Awesome video thank you so much
@xtra_slo1596
5 жыл бұрын
Racerkid998 glad it helped 🤙🏼
@amyhecklings77305 жыл бұрын
Tq👌
@FermSingh5 жыл бұрын
do you need to remove the rear bumper to remove the reflectors?
@xtra_slo1596
5 жыл бұрын
SimpleCircuits yes you will need to take the bumper off to removing the reflectors.
@xcoldrealityx4 жыл бұрын
Hello! awesome video! at 3:56, you mention the 10mm bolts on either side. My rear bumper is actually missing these bolts so there is some vibration. Do you know the exact specs of those bolts? Been looking to buy them but can't find any information about them other than they are "10mm". Thanks in advance! I have a 2015 Mitsubishi Ralliart.
@xtra_slo1596
4 жыл бұрын
I’d take one from the same spot on the front bumper and bring it to a hardware store to match
@nbfisherman37605 жыл бұрын
are all the plastic clips the same? and were can i get those clips?
@xtra_slo1596
5 жыл бұрын
NB Fisherman id contact your local Mitsubishi for any broken or lost clips needing replacement
@dennisbenlot57935 жыл бұрын
Do you think this will work on a regular lancer? Or is this just exclusive the evo 10? Mine is an 09 lancer gts
@xtra_slo1596
5 жыл бұрын
Dennis Benlot i would put money on them being the same connections holding the bumper on 👍🏼
@HotWing5096 жыл бұрын
Was there any fuses that needed to be disconnected?
@xtra_slo1596
6 жыл бұрын
Diego Zaragoza no fuses just plastic clips and 10mm bolts
@HotWing509
6 жыл бұрын
Xtra_Slo Garage awesome Thanks!
@jordivandegeuchte3558 Жыл бұрын
I hope its the same whit a lancer gone make a evo look lol
Пікірлер: 34
Great instructions, the picture in picture is awesome
Thank you very much, as I saw the service manual then I felt slightly confused, that's not what honda gave. Thanks to you, the bumper came down in 10 minutes. I don't have a screw behind the license plate ;)
Great video! Had to replace my bumper cover and I couldn’t have done it without this video
@xtra_slo1596
5 жыл бұрын
Herpopotamus 🙌🏼 glad this helped!!!
Great job👋👍 now I can actually buy my carbon fiber rear bumper insert to install since you already shows me how to remove my Evo x rear bumper 😂
@xtra_slo1596
4 жыл бұрын
Yaertu Śii Great! 👍🏼
Superb video. Very simple and easy to understand. The picture in picture is just fantastic. I especially loved the way how long bar clip would appear before proceeding to removal of bumper. Many do not preview just as you do. Great job!
@xtra_slo1596
4 жыл бұрын
Thanks for the feedback and compliments! 👍🏼 glad it’s helps
I had to change the license plate light assemblies and your video was really helpful, thank you!
@xtra_slo1596
4 жыл бұрын
Attila Nagy great! 💪🏼
Nice filmography!
Excellent video 👍
Brilliant thanks, much appreciated
great video bro, thank you!
I have a 07 Mitz Eclipse. Is changing the bumper that easy for my car as well?
Great video, i think i have snapped the plastic bracket on the left hand side on a spirited drive on some bumpy terrain on the weekend, this will help me remove the bar to check, cheers.
@xtra_slo1596
5 жыл бұрын
Rekstafa Excellent! Glad this helped!
Thanks brutt, well said.
nice video
Awesome video thank you so much
@xtra_slo1596
5 жыл бұрын
Racerkid998 glad it helped 🤙🏼
Tq👌
do you need to remove the rear bumper to remove the reflectors?
@xtra_slo1596
5 жыл бұрын
SimpleCircuits yes you will need to take the bumper off to removing the reflectors.
Hello! awesome video! at 3:56, you mention the 10mm bolts on either side. My rear bumper is actually missing these bolts so there is some vibration. Do you know the exact specs of those bolts? Been looking to buy them but can't find any information about them other than they are "10mm". Thanks in advance! I have a 2015 Mitsubishi Ralliart.
@xtra_slo1596
4 жыл бұрын
I’d take one from the same spot on the front bumper and bring it to a hardware store to match
are all the plastic clips the same? and were can i get those clips?
@xtra_slo1596
5 жыл бұрын
NB Fisherman id contact your local Mitsubishi for any broken or lost clips needing replacement
Do you think this will work on a regular lancer? Or is this just exclusive the evo 10? Mine is an 09 lancer gts
@xtra_slo1596
5 жыл бұрын
Dennis Benlot i would put money on them being the same connections holding the bumper on 👍🏼
Was there any fuses that needed to be disconnected?
@xtra_slo1596
6 жыл бұрын
Diego Zaragoza no fuses just plastic clips and 10mm bolts
@HotWing509
6 жыл бұрын
Xtra_Slo Garage awesome Thanks!
I hope its the same whit a lancer gone make a evo look lol